Tregaskiss, an ITW company

Robotic Water-Cooled MIG Guns come with gas lines.
Explosives, Armaments, and Weaponry

Robotic Water-Cooled MIG Guns come with gas lines.

Robotic Water-Cooled MIG Guns are available in CWD and TWD versions which are used for conventional robots and through-arm robots respectively. Units come in amperages ranging from 350 to 600 amps and are equipped with gas diffuser. Products use dual-circuit cooling system and are offered in clutch and solid mount models. MIG guns come with mounting arms, neck options and integrated air blast.

Read More »
Custom Height Reamer Stand offers accelerated installation.
Display & Presentation Equipment

Custom Height Reamer Stand offers accelerated installation.

Designed for TOUGH GUN™ TT3 and TT3E Reamer robotic nozzle cleaning stations, TOUGH GUN Reamer Stand comes in custom heights from 18–45 in. and features 8.5 x 6.5 in. hole pattern for mounting to floor that lets users swap stands between weld cell stations. Bolt pattern supports use of quick-change base plate featured on all TOUGH GUN TT3 Reamer models as well as hole pattern for mounting...

Read More »
Robotic Nozzle Cleaning Station reduces integration efforts.
Cleaning Products & Equipment

Robotic Nozzle Cleaning Station reduces integration efforts.

With digital Ethernet communications, TOUGH GUN™ TT3E Reamer fosters integration into digital controls infrastructure. Design eliminates need for analog switch, which also reduces cabling requirements and reduces potential failure points. Also included, remote monitoring capabilities let companies oversee and troubleshoot I/O of each reamer function and its allowable parameters in real-time and...

Read More »
Robotic Air-Cooled MIG Guns have re-engineered neck clamp.
Explosives, Armaments, and Weaponry

Robotic Air-Cooled MIG Guns have re-engineered neck clamp.

Offering direct replacement for TOUGH GUN™ G1 Series MIG Gun, TOUGH GUN CA3 features replaceable unicable that promotes extended service life. Outer jacket resists UV radiation and abrasion while inner layer is formulated to resist thermal fatigue. TOUGH GUN TA3, replacing TOUGH GUN ThruArm G1 Series MIG Gun, features Low-Stress Robotic Unicable, which allows for stress-free rotation. Both have...

Read More »
Software

New Online Configurators Customize Robotic MIG Gun Series for Exact Welding Applications

WINDSOR, Ontario — Two new online configurators offered by Tregaskiss make it easy to customize the company's TOUGH GUN™ G1 and TOUGH GUN ThruArm™ G1 Series Robotic MIG Guns for specific industrial welding applications. The TOUGH GUN G1 Series Robotic MIG Guns are designed for high-volume production environments, while the TOUGH GUN ThruArm G1 Series Robotic MIG Guns minimize downtime and...

Read More »
Newly Designed Cutter Blades Offer Improved Performance at a Competitive Price
Food Processing & Preparation

Newly Designed Cutter Blades Offer Improved Performance at a Competitive Price

WINDSOR, Ontario — Tregaskiss has announced improvements to its cutter blades for use with its TOUGH GUN™ TT3 Reamer and TOUGH GARD™ Spatter Cleaner. The newly designed cutter blades feature a twin flute design that improves cutting and cleaning performance during the robotic MIG gun nozzle cleaning process, helping ensure users gain better performance and a longer life from their...

Read More »
Tregaskiss to Display Robotic MIG Guns, Peripherals and Consumables at FABTECH 2013
Explosives, Armaments, and Weaponry

Tregaskiss to Display Robotic MIG Guns, Peripherals and Consumables at FABTECH 2013

WINDSOR, Ontario — Tregaskiss will attend FABTECH 2013, November 18 to 21 at the McCormick Place in Chicago, sharing booth N836 with Bernard and Miller Electric Mfg. Co. There, it will display its latest robotic MIG guns, consumables and peripherals designed to maximize productivity and quality in the automotive, heavy equipment, fabrication and manufacturing industries. Included in the new...

Read More »
MIG Gun Reamer minimizes maintenance and promotes reliability.
Welding Equipment & Supplies

MIG Gun Reamer minimizes maintenance and promotes reliability.

Helping to extend life of robotic MIG guns and consumables to increase productivity, TOUGH GUN™ Reamer TT3 Series features sprayer reservoir located as to safeguard against overfilling and leakage onto internal electronics. Plug and play internal replacement parts feature smart-keyed connections to facilitate assembly and accelerate in-cell troubleshooting, while centralized terminal strip...

Read More »
Robotic Water-Cooled MIG Guns come with gas lines.
Explosives, Armaments, and Weaponry

Robotic Water-Cooled MIG Guns come with gas lines.

Robotic Water-Cooled MIG Guns are available in CWD and TWD versions which are used for conventional robots and through-arm robots respectively. Units come in amperages ranging from 350 to 600 amps and are equipped with gas diffuser. Products use dual-circuit cooling system and are offered in clutch and solid mount models. MIG guns come with mounting arms, neck options and integrated air blast.

Read More »
Custom Height Reamer Stand offers accelerated installation.
Display & Presentation Equipment

Custom Height Reamer Stand offers accelerated installation.

Designed for TOUGH GUN™ TT3 and TT3E Reamer robotic nozzle cleaning stations, TOUGH GUN Reamer Stand comes in custom heights from 18–45 in. and features 8.5 x 6.5 in. hole pattern for mounting to floor that lets users swap stands between weld cell stations. Bolt pattern supports use of quick-change base plate featured on all TOUGH GUN TT3 Reamer models as well as hole pattern for mounting...

Read More »
Robotic Nozzle Cleaning Station reduces integration efforts.
Cleaning Products & Equipment

Robotic Nozzle Cleaning Station reduces integration efforts.

With digital Ethernet communications, TOUGH GUN™ TT3E Reamer fosters integration into digital controls infrastructure. Design eliminates need for analog switch, which also reduces cabling requirements and reduces potential failure points. Also included, remote monitoring capabilities let companies oversee and troubleshoot I/O of each reamer function and its allowable parameters in real-time and...

Read More »
Robotic Air-Cooled MIG Guns have re-engineered neck clamp.
Explosives, Armaments, and Weaponry

Robotic Air-Cooled MIG Guns have re-engineered neck clamp.

Offering direct replacement for TOUGH GUN™ G1 Series MIG Gun, TOUGH GUN CA3 features replaceable unicable that promotes extended service life. Outer jacket resists UV radiation and abrasion while inner layer is formulated to resist thermal fatigue. TOUGH GUN TA3, replacing TOUGH GUN ThruArm G1 Series MIG Gun, features Low-Stress Robotic Unicable, which allows for stress-free rotation. Both have...

Read More »
Software

New Online Configurators Customize Robotic MIG Gun Series for Exact Welding Applications

WINDSOR, Ontario — Two new online configurators offered by Tregaskiss make it easy to customize the company's TOUGH GUN™ G1 and TOUGH GUN ThruArm™ G1 Series Robotic MIG Guns for specific industrial welding applications. The TOUGH GUN G1 Series Robotic MIG Guns are designed for high-volume production environments, while the TOUGH GUN ThruArm G1 Series Robotic MIG Guns minimize downtime and...

Read More »
Newly Designed Cutter Blades Offer Improved Performance at a Competitive Price
Food Processing & Preparation

Newly Designed Cutter Blades Offer Improved Performance at a Competitive Price

WINDSOR, Ontario — Tregaskiss has announced improvements to its cutter blades for use with its TOUGH GUN™ TT3 Reamer and TOUGH GARD™ Spatter Cleaner. The newly designed cutter blades feature a twin flute design that improves cutting and cleaning performance during the robotic MIG gun nozzle cleaning process, helping ensure users gain better performance and a longer life from their...

Read More »
Tregaskiss to Display Robotic MIG Guns, Peripherals and Consumables at FABTECH 2013
Explosives, Armaments, and Weaponry

Tregaskiss to Display Robotic MIG Guns, Peripherals and Consumables at FABTECH 2013

WINDSOR, Ontario — Tregaskiss will attend FABTECH 2013, November 18 to 21 at the McCormick Place in Chicago, sharing booth N836 with Bernard and Miller Electric Mfg. Co. There, it will display its latest robotic MIG guns, consumables and peripherals designed to maximize productivity and quality in the automotive, heavy equipment, fabrication and manufacturing industries. Included in the new...

Read More »
MIG Gun Reamer minimizes maintenance and promotes reliability.
Welding Equipment & Supplies

MIG Gun Reamer minimizes maintenance and promotes reliability.

Helping to extend life of robotic MIG guns and consumables to increase productivity, TOUGH GUN™ Reamer TT3 Series features sprayer reservoir located as to safeguard against overfilling and leakage onto internal electronics. Plug and play internal replacement parts feature smart-keyed connections to facilitate assembly and accelerate in-cell troubleshooting, while centralized terminal strip...

Read More »

All Topics