Fluid Components International
San Marcos, CA 92078
New ST100 Flare Gas Flow Meter Comes with Backlit LCD Display/Readout
Available with either an optional integral VeriCal System or a Kit System, which can be used for retrofitting installed meters. Includes service up to 850ºF (454ºC) and is available with both integral and remote (up to 1000 feet [300 meters]) electronics versions. Capable of storing up to five unique calibration groups to accommodate broad flow ranges, differing mixtures of the same gas and...
Read More »
New Thermal Mass Air/Gas Flow Meters are Ideal for Automated Process and Plant Applications
ST51A and ST75A flow meters comes with Modbus option and meets EIA/TIA-485 standard and provides mass flow rate, totalized flow, and temperature data. Housed in a compact, rugged, IP67 rated, dual-conduit port transmitter enclosure and available in aluminum or a 316L stainless steel version. Provide dual 4-20 mA, NAMUR NE43 compliant, analog outputs and a 500 Hz pulse output.
Read More »
Latest ST80 Series Thermal Mass Flow Meter Comes with Adaptive-Sensor Technology
Available for pipe diameters ranging from 25 to 2500 mm at temperatures up to 454°C. Features standard outputs such as dual 4-20 mA, HART, Modbus 485, USB port and NAMUR NE43 compliant analog outputs. Delivers a reading accuracy of ±1%, repeatability of ±0.5% of reading with flow rates up to 1000 SFPS.
Read More »
New ST80 Thermal Mass Flow Meter Provides Direct Mass Flow Measurement with Single Process Penetration
Features breakthrough Adaptive Sensor Technology (AST) and hybrid sensor drive. Accurate to ±1% of reading, ±0.5% of full scale and repeatability of ±0.5% of reading. Delivers fast response with extended measuring ranges at low power consumption to maximize sensor reliability and reduce instrument energy expenses.
Read More »
FCI Launches FS10i Flow Switch Monitor for Optimizing Air Flow and Reducing Compressed Air Energy Costs
FS10i Flow Switch Monitor from Fluid Components International allows proper measurement of compressed air flow lines. The monitors are designed for simple insertion into threaded tees in 0.5-inch or larger diameter pipe. Its 4-20 mA flow monitoring output is ideal for both increasing and decreasing changes in flow rate, operating over a wide flow range from 0.25 FPS to 400 SFPS. The FS10i...
Read More »
FCI Launches ST75 Gas Flow Meter with Solid-State Thermal Dispersion Mass Flow Sensing Element
The ST75 Gas Flow Meter is designed for measuring gas or gas mixture. The unit can be calibrated to measure over a flow range from 0.04 to 559 SCFM. It offers a dependable accuracy to ±1% of reading with ±0.5% repeatability in line sizes ranging from 6 to 51 mm. The flow meter can be operated in 0 to 250°F process temperature range and pressures up to 240 psig. The ST75 meter is offered with...
Read More »
Rugged ST100 Digester Gas Flow Meter Provides Accurate, Safe, & Compliant Measurement
Muni or Industrial Wastewater Treatment, BioGas, Landfill Gas and More San Marcos, CA—June 28, 2018—Engineers and operators responsible for accurately measuring gas production from digester tanks at municipal or industrial wastewater treatment operations can depend on the rugged ST100 Series Thermal Flow Meter from Fluid Components International (FCI) to provide precision mass flow...
Read More »
FS10i Ventilation Air Flow Switch/Monitor Meets NFPA86 Standard for Ovens & Furnaces
Includes SIL 2 Rating for Safety Instrumented Systems (SIS) San Marcos, CA—June 20, 2018—Users, specifiers and designers of industrial-grade ovens and furnaces will find the FS10i Flow Switch Monitor from Fluid Components International (FCI) provides a ruggedized, ultra-reliable ventilation air flow switch in compliance with the requirements of the National Fire Prevention Association’s...
Read More »
ST51 Landfill Gas Flow Meter comes in IP 67 rated enclosure.
ST51 Landfill Gas Flow Meter is used for solid waste landfill gas flow measurement. Unit is equipped with thermal dispersion flow sensor and is suitable to measure biogas, digester gas, landfill gas, natural gas, and for air, compressed air or nitrogen. Featuring dual 4-20 mA and a 500 Hz pulse outputs, product can be installed into the pipe using a 0.5 or 0.75 inch NPT compression fitting. This...
Read More »
FLT Series Switch is equipped with thermal dispersion mass flow sensor.
Available in FLT93S and FLT93F versions, FLT Series Switch can be operated in setpoint range in water from 0.01 to 0.5 FPS. Unit offers level/interface accuracy of ±0.25 in. and measurement repeatability of ±0.125 in. Product is operated in a temperature range of -40 to 350 °F and is suitable for wet/dry detection, high/low level alarm and control, foam and sediment interface control and...
Read More »
New ST100 Flare Gas Flow Meter Comes with Backlit LCD Display/Readout
Available with either an optional integral VeriCal System or a Kit System, which can be used for retrofitting installed meters. Includes service up to 850ºF (454ºC) and is available with both integral and remote (up to 1000 feet [300 meters]) electronics versions. Capable of storing up to five unique calibration groups to accommodate broad flow ranges, differing mixtures of the same gas and...
Read More »FCI Product Knowledge Workshop Offers Free Training on Thermal Flow Meters and Flow Switches
Biogas, Chemical, Electric Power, Food/Beverage, Landfill, Mining, Oil/Gas, Pharmaceutical, Pulp/Paper, Water, Wastewater San Marcos, CA—August 15, 2019—Fluid Components International (FCI) announces that registration is open for its next free customer training Product Knowledge Workshop, which will take place on October 15-16 in San Marcos, California. This workshop is designed to...
Read More »
New Thermal Mass Air/Gas Flow Meters are Ideal for Automated Process and Plant Applications
ST51A and ST75A flow meters comes with Modbus option and meets EIA/TIA-485 standard and provides mass flow rate, totalized flow, and temperature data. Housed in a compact, rugged, IP67 rated, dual-conduit port transmitter enclosure and available in aluminum or a 316L stainless steel version. Provide dual 4-20 mA, NAMUR NE43 compliant, analog outputs and a 500 Hz pulse output.
Read More »
Latest ST80 Series Thermal Mass Flow Meter Comes with Adaptive-Sensor Technology
Available for pipe diameters ranging from 25 to 2500 mm at temperatures up to 454°C. Features standard outputs such as dual 4-20 mA, HART, Modbus 485, USB port and NAMUR NE43 compliant analog outputs. Delivers a reading accuracy of ±1%, repeatability of ±0.5% of reading with flow rates up to 1000 SFPS.
Read More »
New ST80 Thermal Mass Flow Meter Provides Direct Mass Flow Measurement with Single Process Penetration
Features breakthrough Adaptive Sensor Technology (AST) and hybrid sensor drive. Accurate to ±1% of reading, ±0.5% of full scale and repeatability of ±0.5% of reading. Delivers fast response with extended measuring ranges at low power consumption to maximize sensor reliability and reduce instrument energy expenses.
Read More »
FCI Launches FS10i Flow Switch Monitor for Optimizing Air Flow and Reducing Compressed Air Energy Costs
FS10i Flow Switch Monitor from Fluid Components International allows proper measurement of compressed air flow lines. The monitors are designed for simple insertion into threaded tees in 0.5-inch or larger diameter pipe. Its 4-20 mA flow monitoring output is ideal for both increasing and decreasing changes in flow rate, operating over a wide flow range from 0.25 FPS to 400 SFPS. The FS10i...
Read More »
FCI Launches ST75 Gas Flow Meter with Solid-State Thermal Dispersion Mass Flow Sensing Element
The ST75 Gas Flow Meter is designed for measuring gas or gas mixture. The unit can be calibrated to measure over a flow range from 0.04 to 559 SCFM. It offers a dependable accuracy to ±1% of reading with ±0.5% repeatability in line sizes ranging from 6 to 51 mm. The flow meter can be operated in 0 to 250°F process temperature range and pressures up to 240 psig. The ST75 meter is offered with...
Read More »
Rugged ST100 Digester Gas Flow Meter Provides Accurate, Safe, & Compliant Measurement
Muni or Industrial Wastewater Treatment, BioGas, Landfill Gas and More San Marcos, CA—June 28, 2018—Engineers and operators responsible for accurately measuring gas production from digester tanks at municipal or industrial wastewater treatment operations can depend on the rugged ST100 Series Thermal Flow Meter from Fluid Components International (FCI) to provide precision mass flow...
Read More »
FS10i Ventilation Air Flow Switch/Monitor Meets NFPA86 Standard for Ovens & Furnaces
Includes SIL 2 Rating for Safety Instrumented Systems (SIS) San Marcos, CA—June 20, 2018—Users, specifiers and designers of industrial-grade ovens and furnaces will find the FS10i Flow Switch Monitor from Fluid Components International (FCI) provides a ruggedized, ultra-reliable ventilation air flow switch in compliance with the requirements of the National Fire Prevention Association’s...
Read More »
ST51 Landfill Gas Flow Meter comes in IP 67 rated enclosure.
ST51 Landfill Gas Flow Meter is used for solid waste landfill gas flow measurement. Unit is equipped with thermal dispersion flow sensor and is suitable to measure biogas, digester gas, landfill gas, natural gas, and for air, compressed air or nitrogen. Featuring dual 4-20 mA and a 500 Hz pulse outputs, product can be installed into the pipe using a 0.5 or 0.75 inch NPT compression fitting. This...
Read More »
