Foxborough, MA 02035
Handheld Oscilloscopes feature 2 totally isolated channels.
Featuring shockproof IP54 design, 20 MHz Model OX5022 and 40 MHz Model OX5042 each include 8,000 count TRMS multimeter with power measurements and built-in harmonic analyzer. Handscope Oscilloscopes are equipped with 3.5 in. color LCD screen and LED backlighting, as well as 2 MB of storage for recording data. In multimeter mode, it is possible to store graphic recordings of 2,700 measurements...Read More »
Function Generator ranges from 0.001 Hz to 20 MHz.
With Direct Digital Synthesis and frequency accuracy of -Read More »
Digital Megohmmeters offer insulation measurements up to 30 TW.
Ideal for use on rotating equipment and machinery operating at >10 kV, Megohmmeter models 6550 and 6555 are fully automated 10,000 and 15,000 V graphical insulation testers. Able to program up to 3 step voltage profiles, units include DAR, PI, DD, ΔR, capacitance, leakage current test results, and programmable temperature correction of resistance readings. Included DataView-® software...Read More »
Digital Multimeters offer nonelectrical contact testing function.
Featuring IEC61010 600V CAT IV rating, Models 5231 and 5233 provide volt, ohm, continuity, and diode functions. Model 5233 additionally offers capacitance, frequency, duty cycle, and ammeter functions. Using current clamp accessory, Model 5231 performs AC/DC direct reading current measurements up to 600 A, while Model 5233 can measure up to 10 A directly and can measure temperature in -Read More »
Power/Harmonic Clamp-On Meters have 1,000 V CAT IV safety rating.
Rated for safe operation at building electrical supply source, IP54-rated Models 407 and 607 offer wirelessly data extraction via Bluetooth technology and perform standard measurement of volts, amps, frequency, resistance, and continuity. Units also measure TRMS Voltage and Current as well as AC+DC with Min/Max/Avg and CF display. Further able to measure all types of InRush, meters are capable of...Read More »
Clamp-On Meters feature 1,000 V CAT IV safety rating.
Safe to operate at source of building electrical supply, Model 405 measures TRMS voltage and current of 1,000 Vac/Vdc and 1,000 Aac/1,500 Adc, while Model 605 measures 1,000 Vac/Vdc and 2,000 Aac/3,000 Adc. IP54-rated units also measure all types of InRush, even those due to load increases on installation which is already up and running. Both Peak and RMS InRush values are captured at 1 ms sample...Read More »
Clamp-On Meters carry 1,000 V CAT IV safety rating.
Featuring IP54 construction, Models 401, 403, 601, and 603 can measure volts, amps, frequency, resistance, and continuity at building's electrical supply source. Products measure all types of InRush(TM), even those due to load increases on installation that is already up and running. Peak and RMS InRush values are captured at 1 msec sample rate and 100 msec duration windows. Meters measure...Read More »
AC Current Recorder stores up to 1,000,000 measurements.
Powered by alkaline batteries, Simple Logger-® II Model L104 offers full scale ranges from 5-1,200 A, depending on current probe selection. Harmonic measurements are calculated from 64 samples taken on each AC cycle measured and are available in real-time using DataView-® software. Capable of storing TRMS measurements at user-programmable rates from 8 times/sec to 1 time/day, 4-channel recorder...Read More »
Portable Megohmmeter offers 3 user-selectable test voltages.
Capable of measuring insulation resistance from 1 kW to 4,000 MW, Model 6527 offers insulation test voltages of 250, 500, and 1,000 V. Unit also serves as multimeter with AC/DC voltmeter capable of measuring up to 600 Vac and 1,000 Vdc, continuity test function with audible beeper for resistances under 35 W, and overload protection of 600 Vrms. Housed in over-molded case with back-stand and dual...Read More »
Phase Rotation Meter features non-contact design.
Operating from 75-1,000 Vac, Model 6610 has 45-65 Hz frequency range and 3 attached color-coded test leads with non-metallic alligator sensor clips that provide connection to DUT. Device does not have any direct electrical contact (no metal contact points) and offers phase rotation LED indicators (ABC or BAC). LED indication is available for live or open phase (A, B, C), and back cover includes...Read More »