Aprima Medical Software, Inc
Carrollton, TX 75006
Share:
Imager uses digital auto-focus to read 1D and 2D codes.
Miniature mega pixel imager, Quadrus MINI reads both linear bar codes and 2D codes, such as Data Matrix, directly marked on boards and components. For operation, user plugs in unit, points at object of interest, and pushes EZ button. Imager focuses and sets exposure time, gain, and illumination intensity. MINI can be embedded inside pick-and-place robotic equipment or mounted at entrance and exit...
Read More »Self-Contained PC features 3 PC/104-Plus expansion sites.
Utilizing Intel Celeron M processor, Talon 8400 features 256 MB PC100/PC133 SDRAM and 20 GB hard drive. It includes 2 fast Ethernet ports, 4 USB 2.0 ports, SVGA connector, 1 IEEE 1284 port, and 4 RS232/485 serial ports. Talon supports wireless connectivity by way of 2 open PCMCIA slots. Featuring aluminum housing, PC performs in harsh conditions with operating temperature of 5-40Ã-
Read More »CompactPCI SBC utilizes low-power processors.
Single-slot CPCI-7808 is powered by Intel Pentium M or Celeron M processors with 400 MHz system bus. It incorporates Intel 855GME graphics memory controller with up to 2 GB DDR SDRAM and is compliant with PICMG 2.16 CompactPCI/PSB specifications. Along with 1.4 GHz Pentium M and CompactFlash options, SBC offers dual PMC sites (64-bit/66 MHz PCI and 32-bit/33 MHz PCI), parallel and serial ATA,...
Read More »
Moisture Meter detects leaks and moisture in boats.
Skipper Plus can be moved across surface of boat to detect moisture through paint and coatings on wood up to depth of 1.25 in. in non-destructive manner. Product may also be used to detect leaks and trace them to their source. It offers 3 measurement ranges, optimized for testing materials such as hardwood, GRP, and surface moisture. Along with external rubber electrodes, unit features integrated...
Read More »Adjustable Mounts help optimize limit switch accuracy.
With low-profile, 0.197 in. thick LSM Mounts, full-sized and miniature DIN limit switch devices can be adjusted by up to 1.18 in. and 0.50 in., respectively. Using screwdriver for adjustment, accurate switching and sensing is assured. Mounts are fabricated from corrosion-resistant aluminum and include stainless steel fasteners.
Read More »I/O Board can be used for any specialized I/O function.
As programmable I/O card for PC/104-PCI bus, MESA 4168 uses 200K or 400K gate Xilinx Spartan3 FPGA for all logic. FPGA configuration is downloadable from PCI bus side, and bus mastering PCI bridge enables card to work with 5 and 3.3 V PCI buses. Pre-made functions include 12-axis host-based servo motor controller, 24-channel quadrature counter, 8-axis microcontroller-based servo motor controller,...
Read More »Speed Reducers have modular construction for flexibility.
Flexbloc(TM) right angle worm gear speed reducers stop oil leaks and lower operational noise due UnicaseÃ-® one-piece, aluminum alloy housing. Various bolt-on components can be configured to meet specific application requirements, and choice of C-face motor adaptor or solid input shaft enables additional customization. Products are available in single, helical, or double worm configurations...
Read More »Precision VMC comes with 6,000 or 10,000 rpm spindle.
With 50 x 24 x 25.2 in. work envelope and 52 x 22 in. table work surface, D Series is suited for mixed volume, short-run operations as well as dedicated high-volume applications. It offers rapid traverse rates of 1,181 imp on all axes and has automatic tool changer with bi-directional selection mode, 22-tool capacity, and 5.5 sec station-to-station index time. Belt-driven cartridge-style...
Read More »Horizontal Boring Mills feature live spindles.
Floor-type Series FT and FTR are designed with cross-ribbed columns and steel runways, resisting deflection and minimizing vibration. Machines offer 787 ipm rapid traverse rates, X-axis travels of 13-53 ft, and Y-axis vertical headstock travel starting at 6.6 ft. Live spindle provides programmable axis for drilling and tapping as well as adding reach for boring operations. Two- and four-speed...
Read More »
Case Inserts and Tote Liners utilize PNP technology.
Available in fabricated foam, laminated composite, and conductive/anti-static materials, case inserts and tote liners feature PNP (Part No. in the Pocket) labeling technology, which ensures positive component identification and protection. PNP labeling technology, located in bottom of tool or component silhouette pocket/cavity, is protected by clear, plastic laminate and aids in inventory...
Read More »