Actions Semiconductor Co., Ltd.
Guangdong 519085 CHN
Share:
Thermal Printer communicates via RF for portable printing.
Compact DPU-H245 has RF transceiver for wireless printing over range of 500-1500 ft indoors, 2 miles line of sight with omni-directional antenna, or 12 miles with directional antenna. It measures 135 x 100 x 36 mm. Rechargeable NiMH battery allows printing of 8,000 character lines on single charge. It supports condensed and enhanced fonts, has print resolution of 384 dots/line, and print speed of...
Read More »
Butterfly Valves operate up to 200 psig.
Resilient seated butterfly valves offer phenolic backed cartridge seat to provide full rated dead-end service on all lug pattern valves. Torque values are minimized by use of 4 TeflonÃ-® bushings properly aligned down blowout proof shaft. Valves are manufactured with cast iron bodies; ductile iron nickel plated, aluminum bronze, or 316 SS discs; and Buna-N, EPDM, or Viton resilient seats....
Read More »
Electric High Lift is available in 2 models.
Maxx-Jack Electric High Lift is capable of lifting skids, plastic pallets, wire baskets and containers with open bottoms. Unit includes 12 Volt electrical system with battery and charger. Push button lift and lower control is located in handle, and magnetic backed remote lift/lower control with 6 ft. cord is optional. Electric High Lift, with 2,200 lb capacity, includes automatic floor lock.
Read More »
Transmitter features aluminum connection head.
LPN-H relative humidity sensing module, features loop powered 4-20mA output signal, representing 0-100% RH, and Pt100 output signal, representing temperature. Unit comes in wall mount and duct mount versions. Relative humidity sensor and temperature-compensating sensor protrude from head inside protective cap, allowing air to circulate to sensors. Sensors are mounted on their own circuit board,...
Read More »
High Speed Doors operate at rates up to 42 in./sec.
TrakLine(TM) doors can be fitted for openings up to 400 square feet. They feature V-Flex(TM) Curtain Release System, which helps curtains withstand impact. V-Flex track, coupled with folding design, allows door to operate in winds up to 45 mph. Curtain design operates without any troublesome reversing edges, coil cords, or heavy bottom bars.
Read More »
Conveyors provide single solution for multiple applications.
Zig-ZagÃ-® Overhead Enclosed Chain Conveyors allow manufacturing and distribution centers to combine carton, tote distribution, and trash handling in one conveyor system that can integrate with existing floor conveyor systems. They automate manual functions and provide safer working environment.
Read More »
Scissor Lift is for low volume paint operations.
Self-propelled, curved rail guided scissor lift can access both sides and ends of product as it travels on floor guide rail. This pneumatic/hydraulic powered personnel lift travels from lowered platform height of 31 ft to maximum raised operator platform height of 144 ft. Its 30 x 66 ft operator platform features 500 lb capacity. Unit can be rolled off guide rail and used as stationary scissor...
Read More »
Calibrator outputs preset number of pulses.
Model CLF-11 can be connected to loop powered transmitter inputs. Signal outputs and measurement inputs are fully electrically isolated from each other to read output and input simultaneously. Square wave pulses can be generated with frequencies from 0.01 Hz to 10 kHz. Pulse height is adjustable between 100 mV and 24 Volts. Output can drive 34 mA to simulate signals from photo electrics, electro...
Read More »
Monitors provide unattended analysis of flue gases.
Model 7600 Series of Continuous Emission Monitors consist of sampling probe, heated filter and sample line, sample conditioner, gas detectors, microprocessor controller and data acquisition system. Infrared detectors include CO, SO2, CO2, chemiluminescence detector for NOX, electrochemical detector for O2 and FID detector for hydrocarbons. Monitors are enclosed in free-standing NEMA 12 cabinet...
Read More »
Rotary Encoder is designed for large shafts.
Designed for shafts with axes requiring accuracies to approximately 10 angular seconds, ERM 280 modular rotary encoder with magnetic scanning, features 20mm high scanning head. Magneto-resistive scanning permits shaft speeds up to 24,000 rpm, and is available for shaft diameters up to 295 mm (11.6 in.). Encoder features protection class IP 66. ERM 280 is mainly used on C axis of lathes, quill...
Read More »