Recorders

Test & Measuring Instruments

Rugged Miniature Data Recorder supports diverse input types.

February 27, 2015

Eliminating need for slip rings and telemetry for those collecting data on rotating components, SLICE is sized to mount directly on test article without altering test dynamics. Built-in MPU manages signal conditioning and storage system that includes independent excitation sources, variable gain amplifiers, adjustable sampling rates from 10 sps to 500k sps, and adjustable anti-alias filters up to 40 kHz. Shock rated up to 5,000 g, recorder has 16 GB direct-write flash memory.
Read More

Test & Measuring Instruments, Computer Hardware & Peripherals, Optics & Photonics, Vision Systems

Camera Recording Systems help maximize driver safety.

February 4, 2015

With on-board video and remote monitoring capabilities, MDVR Camera Recording Systems provide constant audio video stream of activity going on around vehicle. Systems support H.264 true high definition and run on Linux open source platform. MDVR-1 supports DVR and GPS capabilities, allowing device to track location and video of vehicle after event occurred. MDVR-2 adds in Wi-Fi capabilities for download of footage, while MDVR-3 adds support for 3G cellular data networks. Read More

Test & Measuring Instruments

Temperature Data Loggers enable monitoring from anywhere.

January 30, 2015

Suitable for harsh industrial environments, T&D TR-71wf WiFi Temperature Dataloggers send data to cloud where it can be monitored from anywhere. Two-channel model monitors temperature from -40 to 230°F using external thermistor sensor. Whenever product’s temperature goes out of specification, wireless loggers will immediately send warning email over Internet or LAN network. Alert icon and graph showing color-coded values give users time to take corrective actions. Read More

Test & Measuring Instruments

Portable Strain Gauge Datalogger operates as standalone unit.

January 29, 2015

Targeting mechanical engineering R&D applications, single-channel VersaLog BR measures machinery-generated stress and supports 4/6 wheatstone bridges by providing voltage excitation, excitation voltage compensation, and low-level signal amplification. Input voltage measurement range of -8 to +8 mV accommodates common bridges with sensitivity of up to 3 mV/V. Along with 16-bit ADC and programmable input range, features include 4 MB flash memory, alarm, and 20 msec to 12 hr sampling intervals. Read More

Test & Measuring Instruments

Portable Serial FPDP Recorder offers 8 channels of recording.

January 22, 2015

Serial FPDP (sFPDP) recorder, Talon® Model RTR 2736A, captures up to 8 Serial FPDP data streams in real-time to SSDs. Unit fully complies with VITA 17.1 specification and supports sFPDP baud rates to 4.25 Gbaud. Supported sFPDP modes include copy, flow control, CRC, and copy loop. Along with real-time aggregate recording rates up to 3.2 GBps, features include PCIe Gen 3 SATA III RAID controller, hot-swappable 1.9–15.3 TB SSD, and 17 in. LCD monitor. Other interface options are available. Read More

Test & Measuring Instruments

Portable Serial FPDP Recorder suits field or laboratory use.

January 22, 2015

Capturing up to 8 Serial FPDP data streams in real-time to SSDs, Talon® RTR 2736A complies with VITA 17.1 specification and supports sFPDP baud rates up to 4.25 Gbaud. Unit includes PCIe Gen 3 SATA III RAID controller capable of streaming contiguous data to disk in real-time at aggregate rates up to 3.2 Gbps. Hot-swappable SSD array is available in 1.9–15.3 TB configurations and supports RAID levels 0, 1, 5, or 6. Housed in 16.0 x 6.9 x 13.0 in. case, rugged recorder weighs just 30 lb. Read More

Test & Measuring Instruments

Paperless Chart Recorder incorporates 12.1 in. touchscreen.

January 21, 2015

With up to 48 input channels for measuring voltage, current, thermocouples, or RTDs, Brainchild PR-30 lets users track data on integrated, Hi-Res, touchscreen display. It is possible to view critical lab or industry process in real-time and simultaneously view several values from remote location. Saving measurements to internal Flash memory, recorder offers remote monitoring capability scan rate within 100 msec for all analog channels, and 6 user-configurable plug-and-play I/O card slots. Read More

Test & Measuring Instruments

Paperless Chart Recorders offer real-time monitoring.

December 18, 2014

Designed for measuring voltage, current, thermocouples, or RTDs from remote locations, Brainchild PR Series is suitable for laboratories, hospitals, and factories. Model PR-10 features 4.3 in. touchscreen display and 6 channels, while Model PR-20 has 5.6 in. touchscreen and 6 channels. Equipped with 12.1 in. touchscreen, Model PR-30 provides up to 48 input channels. Recorders offer scan rate within 100 msec for all analog channels and can store data on internal Flash memory. Read More

Test & Measuring Instruments, Sensors, Monitors & Transducers

Machine Tool Monitor offers active monitoring and data logging.

December 11, 2014

As stand-alone unit or integrated into control system, SKF Machine Tool Observer MTx connects all operating-parameter sensors to actively monitor, observe, and log performance history of machine tool spindles, grinding machines, or other rotating equipment. Accumulated condition levels, with continuous recording and long-term storage of critical data, allow intelligent monitoring. MCU-based electronics assembly with internal memory can connect to up to 6 different types of various sensors for monitoring multiple parameters. Read More

Test & Measuring Instruments

Carcass Temperature Datalogger suits slaughter processors.

December 9, 2014

With 8 thermocouple ports and stainless steel hook, 8 in. long and 3 lb CTL2000 monitors and records temperatures of various sections of carcass during pasteurization. Continuous and accurate temperature profile can be used to verify and validate that harmful microorganisms have been effectively depleted. Along with built-in pushbutton start and skirted base, features include -20 to +100°C operation, configurable recording intervals, and 129,000+ reading storage capacity for each channel. Read More

Test & Measuring Instruments

I/Q Data Recorder offers data rate of 100 Msample/sec.

November 20, 2014

With firmware update, R&S IQR100 provides 2 TB memory and can record, store, and play I/Q signals with bandwidths up to 79.6 MHz  loss-free in real-time, and parallel recording of position data and AGC reference levels is possible. Used in combination with test instruments, digital recorder can provide mobile capture of RF spectra such as GNSS, wireless communications, and broadcast signals. Recorded I/Q data can be output to signal generator or exported to PC via LAN or USB storage device. Read More

Test & Measuring Instruments, Controls & Controllers, Sensors, Monitors & Transducers

Wireless Temperature Datalogger supports medical monitoring.

November 18, 2014

Suitable for medical refrigerator/freezer, WiFi-enabled Accsense A2-05W features inputs for 2 external RTD temperature probes with temperature range of -100 to +100°C and additional input for thermocouple measuring down to -200°C for cryogenic storage units. Datalogger supports 802.11a/b/g/n specifications as well as WEP, WPA, WPA2, 802.11i, and 802.1x Supplicant. Users can login through any Web browser to view real-time reports and graphs of data or configure system from anywhere via Internet. Read More

Test & Measuring Instruments, Controls & Controllers, Sensors, Monitors & Transducers, Green & Clean

Intelligent Dataloggers send HVAC/R data over BACnet.

November 17, 2014

When connected to Modbus gateway, Series 3 dataTaker Intelligent Data Loggers can communicate over BACnet for such HVAC verification applications as energy efficiency and air quality monitoring. Universal analog input channels provide flexibility to monitor temperature, humidity, and current/voltage; store data to memory; and transfer it over Bacnet. These intelligent dataloggers also incorporate serial and Ethernet capabilities. Read More

Test & Measuring Instruments, Sensors, Monitors & Transducers, Green & Clean

Energy Audit Kit records usage and verifies performance.

November 12, 2014

Used for energy auditing/verification, EC-7VAR Three-Phase Power & Energy Datalogger Kit can record energy (kWh) and power (kW) usage and provides everything needed: datalogger, voltage leads, transducers, Rogowski coils, case, software, and USB lead. Users can view onsite power consumption as result of logging. Electrocorder 3-phase power factor dataloggers monitor 1, 2, or 3 current channels (up to 400 A, 1 kA, 2 kA, or 3 kAac) as well as 1, 2, or 3 voltage channels (30–500 Vac). Read More

Test & Measuring Instruments, Sensors, Monitors & Transducers

Configurable Thermocouple Dataloggers communicate over Wi-Fi.

November 7, 2014

Able to send data over Wi-Fi® network, Lascar El-WiFi-TC dataloggers are supplied with K-type thermocouple probe with 0 to +400°C measurement range and ±1.5°C accuracy. Connection support also covers J/K/N/T thermocouple types for -270 to +1300°C measurement range. End-users can view real-time temperature data, which is continually monitored, using FilesThruTheAir™ Cloud storage service or integrated display. Fail-safe recording and logged data retention are standard. Read More

Test & Measuring Instruments

Data Logger measures both pressure and temperature.

November 5, 2014

Suitable for autoclave validation and monitoring, PRTemp140 provides downloaded temperature and pressure data simultaneously in single graph display, simplifying data collection and analysis. Unit can measure temperature from -40 to 140°C and pressure from 0–5 bar, with accuracy of ±1°C and ±0.03 bar, respectively. Capable of taking readings as often as once/second, 2-channel logger can store up to 32,700 time and date stamped readings and will retain data if battery becomes discharged. Read More

Test & Measuring Instruments, Green & Clean, Materials & Material Processing

Vibrator and Recording System meet seismic industry needs.

November 4, 2014

Generating up to 34,000 lb peak force, UNIVIB® 2 vibrator employs 173 hp diesel engine and features cab designed for safety, ergonomics, and diagnostics. Footprint promotes maneuverability through dense terrains and environmentally sensitive areas with minimal impact. Helping oil and gas companies maximize efficiencies during data acquisition on land and transition zone environments, G3i® HD cable-based recording system has scalable architecture and supports up to 240,000 channels. Read More

Test & Measuring Instruments

Dual Probe Dataloggers serve high-temperature applications.

October 22, 2014

Featuring stainless steel body, HiTemp140X2 series offer dual probes to measure and record ambient and remote temperatures simultaneously. Dynamic dataloggers come in 6 models and with combinations of 2 in. fast response rigid probes; 72 in., flexible RTD probes; and 24 in., stainless steel, bendable RTD probes. Ambient measuring capabilities, depending on model, range from -76 to +500°F to -328 to +500°F or +932°F. All units store up to 32,700 date and time stamped readings. Read More

Test & Measuring Instruments, Sensors, Monitors & Transducers

Temperature Probe improves PET bottle production, energy use.

October 17, 2014

Targeting reheat stretch blow molded PET bottle manufacturers, handheld PreTemp™ measures preform's interior temperature to help produce better containers and improve energy management. Array of non-contact IR sensors provide temperature profile to operator, who can then adjust heating lamps to more effectively drive heat through preform wall. Probe can measure and record up to 16 data points simultaneously, allowing measurements in axial and radial profile. Read More

Test & Measuring Instruments, Labels, Tags, Signage & Equipment, Automatic ID

RFID Temperature Dataloggers can prove cold chain best practices.

October 17, 2014

CAEN RFID Easy2log© Temperature Data Loggers enable food and beverage industry shipping companies to prove to vendors that product temperatures stayed within safe ranges along entire cold chain. With -40 to +70°C range, IP67-rated multi-trip dataloggers feature EPC C1G2 RFID interface and read range of 10 m in air and 2.5 m on metal @ 2 W ERP. UHF semi-passive tags allow automatic data collection, and internal memory stores up to 8,000 samples. Read More