Level Gages

Test & Measuring Instruments, Controls & Controllers, Sensors, Monitors & Transducers

Liquid Level Indicator has non-electric, dual-chamber design.

September 28, 2015

Incapable of freezing, nitrogen-filled model 5101 has front chamber that houses readily viewable color flag and another housing that holds magnet and float. These separate chambers, manufactured with either Brass or 316 SST, can be mounted into female spud and ensure that front flag indicator never comes in contact with liquid being measured. Design also allows use in hazardous locations. Read More

Test & Measuring Instruments

Liquid Level Gauge offers solid glass top option.

February 12, 2015

With added option, exposed calibration on top of Therma Gauge is available in all glass, making gauge more durable when it is outside and exposed to elements. Glass gauge will withstand virtually any amount of sun exposure and heat, replacing cracked, cloudy, warped, or discolored plastic tops. Solid Glass Calibration can be ordered as add-on option for new gauges or as Solid Glass Repair Kit to upgrade current gauge in field. Read More

Test & Measuring Instruments, Sensors, Monitors & Transducers

Transmitter/Receiver Pair enables wireless level measurement.

July 11, 2014

Able to maintain line of site communications over distances up to 125 ft, Wireless Level Measurement Transmitter and Receiver platform is intended for liquid level (0.0–34.6 ft) measurement. Transmitter sends updated level data and battery condition data once every second, while receiver reads that information and provides analog 4–20 mA output and SCADA register data. RS-232 serial port (Ethernet optional) allows connection to SCADA system for remote monitoring. Read More

Test & Measuring Instruments, Sensors, Monitors & Transducers

Liquid Level Gages offer adjustable centerlines.

February 13, 2014

Compensating for variances that can occur during production of plastic tanks, nylon liquid level gages accommodate centerline distances up to ¼ in. longer or shorter than specified measurement for total adjustability of ½ in. Adjustment can be made by hand, facilitating installation, and features include round Trogamid nylon sight that is clear and durable. Gages are available with centerline measurements from 6–36 in., and red line on back of sight enhances liquid level visibility. Read More

Test & Measuring Instruments, Sensors, Monitors & Transducers

Radar Level Meter helps conserve time and resources.

December 10, 2013

LevelWave Series provides measurement solution for liquids, including corrosive, sticky, or difficult media. While 360° rotation allows for side or top mounting, external display fosters intuitive configuration. Modular design facilitates and accelerates in-field installation, and option is available for full digital remote electronics up to distance of 100 m. Applications include blending, distillation tanks, process tanks and separators, solid silos, and storage tanks. Read More

Test & Measuring Instruments, Electrical Equipment & Systems, Sensors, Monitors & Transducers

Wireless Proximity Switch monitors tank vent relieving.

December 10, 2013

Operating on single lithium battery for at least 1 year, Model MCG 1097 can send signal to notify operator when pressure device is relieving. Information can be monitored and tracked, avoiding guesswork. Using proprietary algorithms, switch instantaneously sends back any alarm conditions as well as continuously checks battery conditions. If battery should get low or any abnormal condition should occur, switch will notify host MCG 7030 Touch Panel Alarm Monitor. Read More

Test & Measuring Instruments, Computer Hardware & Peripherals

Wireless System targets operators of oil and gas terminals.

June 12, 2013

Combining wireless-enabled products, services, and productivity tools tailored for terminal operators, OneWireless™ Terminal Solution includes ISA100-compatible Honeywell Enraf SmartRadar FlexLine wireless radar gauge, which utilizes integrated radio to send tank level measurements securely and wirelessly to central control room. FlexLine is also used as data concentrator, collecting data from local tank instruments and sending it wirelessly through same ISA100 network. Read More

Test & Measuring Instruments, Sensors, Monitors & Transducers

Brass Digital Gage gives accurate gas pressure readings.

May 24, 2013

Model BDG-01 Brass Digital Gauge measures gas pressure with ±0.5% of full-scale accuracy. Featuring brass wetted material, unit is suitable for various gas applications. It requires minimal effort for installation and includes user-selectable units of measure, so one gauge can be used for various pressure scales. Read More

Test & Measuring Instruments

Tank Level Meter displays level in feet and inches.

April 2, 2013

Featuring explosion proof design for safe or hazardous environments, PD6801 ProtEX™ F&I Level Meter has 0.6 in. high upper display that shows level in feet and inches and 0.4 in. lower display that shows volume, percent, or custom tag programmable for any 7 alphanumeric digits. Backlit meter can be read under various lighting conditions, and from viewing angles up to ±40°. Housed in NEMA 4X enclosure, meter has Safe-Touch through-glass buttons that allow operation without removing cover. Read More

Test & Measuring Instruments, HVAC

Magnetostrictive Level Gauge provides continuous measurements.

March 20, 2013

Designed to measure product and interface levels, MCG 8153 Flexible Magnetostrictive Level Gauge features multi-protocol capable digital output for new and existing systems. Five temperature sensors are embedded in probe at different levels to provide average temperature measurement of product. With flexible probes in lengths up to 70 ft, gauge can be installed in nearly any type of storage or process vessel, aboveground or underground. Mounting options include NPT or flange connection. Read More

Test & Measuring Instruments, Sensors, Monitors & Transducers, Electronic Components & Devices, Green & Clean

Li-Ion Battery Fuel Gauge maximizes battery runtime.

January 3, 2013

Operating at 23 µA, MAX17048 automatically detects when battery enters low-current state and switches into low-power 4 µA hibernate mode, while still providing accurate fuel gauging. ModelGauge™ algorithm provides state of charge and compensates for temperature and load variation. Available in 0.9 x 1.7 mm WLP and 2 x 2 mm TDFN packages, gauge is suitable for portable battery-powered applications, such as smartphones, wireless handsets, and mobile accessories. Read More

Test & Measuring Instruments, Sensors, Monitors & Transducers

Continuous Level Measuring System provides 100 ft range.

February 29, 2012

Designed for continuous measurement of powder and bulk materials in silos, tanks, or hoppers, Series DBOB utilizes internal motor that drives weight suspended by firm stainless steel tape down to bulk material level. Upon reaching material, unit reverses and weight is drawn back into upper stop position. Distance weight descends is electronically measured based on internal rotations of unwinding tape. User-programmable to output height or volumetric signal, device measures at rate of 0.6 fps. Read More

Test & Measuring Instruments

Servo Level Gauge includes auto test feature.

October 6, 2011

Targeting oil and gas facilities, Model 854 provides level measurements in bulk storage tanks during inventory control and custody transfer applications. Servo Auto Test feature can be used in overfill protection loops that require SIL-2/SIL-3 solutions to prevent spillage, complying with safety and environmental standards. Diagnostics detect failures inside gauge or in application and report to higher-level systems for further action, mitigating mechanical failure. Read More

Test & Measuring Instruments

Radar Gauge delivers ±3 mm standard accuracy.

June 9, 2011

Using FMCW (Frequency Modulated Continuous Wave) technology, evo 2600 operates in 26 GHz frequency band. Graphical e.WAVE LCD provides detailed information for user, including level, temperature, discrete status, and diagnostics. In addition to displaying graphical profile of tank, display lets user fine tune radar unit to cancel out disturbances. Wizard ensures setup in minutes without violating explosion proof environments, and configured is accomplished via IR technology. Read More

Test & Measuring Instruments

Scalable Tank Gauging System adapts to any application.

December 15, 2010

Equipped with built-in safety features, Raptor simplifies installation of required devices as well as future addition/replacement of units for refineries and bulk liquid storage plants. System consists of non-contact radar level gauges, temperature and pressure transmitters, water interface sensors, and inventory management software. Tank hubs are used to communicate with measuring instruments and control room via standard communication protocols. Read More

Test & Measuring Instruments, Sensors, Monitors & Transducers

Drum Level Sensor flashes strobe when drum is full.

October 22, 2010

Featuring adjustable IST (Infrared Sensing Technology), Dust Sentry(TM) flashes strobe light to alert operators when dust in container reaches preset level to prevent overfill conditions. Installation to any drum or container takes minutes, and plug-and-play design does not require any wiring. Able to work with solids or liquids, solid-state solution offers adjustable depth setting and works with cyclones, bag collectors, and drum separators. Read More

Test & Measuring Instruments, Electrical Equipment & Systems

Tank Level Gauges and Switches suit cryogenic/liquefied gas.

May 13, 2010

Available in single and double switch options, Model 116 indicating switches feature Dry Bellows design with internal bi-directional relief valves with no liquid fill required to protect unit from over-range. DP ranges from 0-80 in. H2O to 0-600 in. H2O. Rated at 4 A at 30 Vdc, 5 A at 120 Vac SPDT, units come with highly visible Flag option to indicate "reorder" or "alarm" fluid conditions, and custom dial faces (logo, dual or tri scale). Read More

Test & Measuring Instruments

Automatic Tank Gauge provides fuel inventory information.

January 14, 2010

By allowing station personnel to remotely monitor fuel inventory, Colibri Tank Gauge can eliminate human error. Unit provides vital information such as leak test data, temperature readings, density measurement, net/gross volume, and water volume, all of which can be viewed on color LCD touch screen. With Ethernet port and web interface, personnel can view information from anywhere via browser. Rules system enables use of emails and text messages to communicate tank events. Read More

Test & Measuring Instruments, Sensors, Monitors & Transducers

Inventory Tank Monitor features integrated network gateway.

December 10, 2009

Designed specifically for fluid processing operations, KING-GAGE® LP3 Liquid Level Gauging System delivers graphic display of inventory status within horizontal or vertical tanks. Inventory monitoring package performs analog signal acquisition and ensures accurate volumetric measurement using preconfigured application dataset. Able to monitor up to 32 tanks, system includes color TFT LCD touchscreen, integrated web server, and support for Modbus TCP/IP and Ethernet/IP. Read More

Test & Measuring Instruments, Sensors, Monitors & Transducers

Acoustic Volume Indicator finds liquid/gas levels in metal tanks.

December 3, 2009

Acoustic Volume Indicator Technology is non-intrusive means to determine liquid or gas volume in pressurized or non-pressurized metal tanks. Components include transducer, impactor, and waveform analyzer software that calculates peak frequency from input signal. Able to work in range of temperatures, pressures, installation connections, and fluid specific gravities, 3 versions are available: AVI Automated which includes alarms and remote signals, AVI Laptop, and AVI Handheld. Read More