Other Balances & Scales

Test & Measuring Instruments

Modular Industrial Scales offer intuitive operation.

May 15, 2015

Offering capacities from 0.6–600 kg, Industrial Compact Systems are available in aluminum diecast or full stainless steel with IP69k rating. Upgraded firmware provides intuitive GUI that prompts operators step-by-step through procedure. Scale respective data interfaces connect up to 4 weighing platforms and integrate with existing IT or process-control systems. With USB-Host interface, users can simultaneously connect multiple USB devices, such as printers, barcode readers, and keyboards. Read More

Test & Measuring Instruments

Coil Scales support above ground or pit mount installation.

April 9, 2015

NTEP approved in capacities from 25,000–100,000 lb, RoughDeck® CS Coil Scales weigh massive steel coils, ingots, and other dense material to legal-for-trade accuracy. Heavy-duty units incorporate tightly spaced 8 in. x 15 lb steel I-beams, ½ in. thick top plate, and self-checking mounting system. Available in sizes from 4 x 6 ft to 10 x 20 ft, scales provide top access to load cell pockets and are available with optional digital weight indicators, remote displays, printers, and coil cradles. Read More

Test & Measuring Instruments, Transportation Industry Products, Sensors, Monitors & Transducers

Vehicle-Scale Conversion Kits optimize scale performance.

February 23, 2015

Available for non-METTLER TOLEDO scales, POWERCELL® PDX® load cells eliminate need to replace entire scale. Conversion kits with NTEP approval are available for Avery Weigh-Tronix Model FCTS, Fairbanks Type S Lever, and Rice Lake Survivor® OTR models. Operating without junction boxes, POWERCELL® PDX® load cells maintain accuracy despite changing environmental conditions. Built-in predictive diagnostics verify performance of each load cell and simplify maintenance. Read More

Test & Measuring Instruments, Mechanical Power Transmission, Electronic Components & Devices

Integrated Measuring System features inductive design.

November 17, 2014

Available for ball and roller rail systems, IMS-I provides feedback for distances up to 4,500 mm, and allows several runner blocks to be positioned independently of each other on same rail. Scale is integrated into profiled rail and protected by tightly welded stainless steel strip across entire rail section length. Rated for positioning accuracy of 0.25 µm with scale precision of ±3 µm/m, inductive measuring system operates without physical contact and is therefore wear-free. Read More

Test & Measuring Instruments

Crane Scale serves medium-duty industrial applications.

November 6, 2014

Offering capacities from 100–1,000 lb, CS750™ crane scales are available in NTEP-certified models and with RFX™ Wireless Weighing Technology. Device is powered by 4 D-cell batteries for up to 800 hr continuous or 5,000 hr in standby mode. Keypad functionality includes tare setting as well as ability to accumulate and total series of weight readings directly on scale. If direct power is required, optional direct power cord with quarter-turn military-spec coupler is included. Read More

Test & Measuring Instruments

Excavator Scales mount to Liebherr crawler excavators.

October 30, 2014

Available for Liebherr R 936 to R 980 SME Crawler Excavators, Trimble® LOADRITE® X2350 Excavator Scales accurately weigh material in bucket and display payload information on monitor in cab. Scales are suitable for common bucket excavator applications, including pit-loading, construction, truck load out, crusher feeding, landscaping, and material handling. Read More

Test & Measuring Instruments

Certified-Accurate Checkweigher targets food can lines.

October 9, 2014

Combining Versa checkweigher controller technology and Teorema weigh table with no moving parts, Versa Teorema operates at line rates up to 660 cans/min. System is equipped with touchscreen control, helix infeed, and high-rate reject system. Featuring stainless steel construction for wet and harsh environments, system can checkweigh both closed and open cans. UK's NMO has certified that checkweigher is in compliance with European Council Directive 2004/22/EC for measuring instruments. Read More

Test & Measuring Instruments, Controls & Controllers

Weighing Terminal supports optional PROFINET IO interface.

September 9, 2014

Capable of supporting simple to complex, stand-alone to integrated, weighing and control applications, IND780 offers interfaces for up to 4 independent measuring channels for scales or flow meters and also supports optional PROFINET® IO interface for data exchange. Other communications interfaces include 4–20 mA output, serial, Ethernet TCP/IP, and USB. OS with graphical display and SmartTrac™ improves speed and accuracy of manual or semi-automatic operations via 3 display modes. Read More

Test & Measuring Instruments

IBC Tote Scale integrates 360 gal spill containment capacity.

August 27, 2014

Intended for industrial and chemical process industries, Model 4042-63 IBC-WE™ weighs and stores IBC tanks up to 52 x 52 x 61 in. with accuracy to within 0.1%–0.5%. Weatherproof polyethylene enclosure provides safe and secure protection of outdoor-stored totes and prevents unauthorized access to them. With 0–8,500 lb gross weighing capacity, corrosion-resistant scale features 4-load cell design that enables IBC totes to be placed anywhere on containment platform without requiring leveling. Read More

Test & Measuring Instruments

Spill Containment Scale serves industrial, municipal applications.

August 25, 2014

Compliant with secondary spill containment requirements of EPA, OSHA, and other regulatory agencies, Model 4042 ECO weighs containers up to 1,500 lb with accuracy to 0.5% or 0.1%–0.25% of full capacity depending on readout indicator type. Design locates load cell under front edge of base frame, and base stands over spill containment basin. While 26 in. scale base, made of powder coated steel, accommodates 18–26 in. dia drums, steel guide rail along back edge assists in centering cylinders. Read More

Test & Measuring Instruments

Water Vapor Transmission Tester supports inverted cup weighing.

June 13, 2014

Featuring independent, 3-chamber testing with weighing mechanism, Labthink PERME W3/031 Water Vapor Transmission Rate System allows individual testing data for 3 samples to be obtained in one test. Arbitral weighing method allows water vapor transmission rate testing, and humidity and temperature control capability are standard. Along with wind speed regulating function, features include permeability test with optimized sensitivity to data produced in process. Read More

Test & Measuring Instruments, Sensors, Monitors & Transducers

Weigh Modules continuously monitor load cell performance.

May 8, 2014

By providing continuous load cell monitoring, SWB605 PowerMount Weigh Modules discover variances before they impact productivity, allowing manufacturers to avoid errors such as load cell overload and out-of-range temperatures. POWERCELL-equipped load cells with on-board microprocessors also adjust weighing signal to compensate for environmental changes. This allows modules to provide accurate weighing regardless of temperature, linearity, hysteresis, and creep. Read More

Test & Measuring Instruments

Weighing Terminal is designed for use in hazardous areas.

April 11, 2014

Compliant with ATEX, FMus+c, and IECEx standards, ICS466x performs safe and accurate weighing in potentially explosive classified hazardous areas of Zone 1 / 21, Division 1. Intrinsically safe terminal limits power output and prevents sparks or high temperatures in electrical circuit that can ignite surrounding atmosphere where flammable gas, dust, or fibers exist. Stainless steel housing is corrosion resistant, and operation menu affords flexible operation.
Read More

Test & Measuring Instruments

Weighing Terminal promotes formulation consistency via software.

February 18, 2014

Supporting IND890form software, IND890 offers flexible, ergonomic weighing. Software offers advanced formulation control for flexible use in industrial applications and lets users monitor and control vertical or horizontal batch campaigns – respectively, those that add each ingredient in one mixing vessel or add each component to multiple vessels before moving to next component. IND890form switches over from one type to other without any room for user error. Read More

Test & Measuring Instruments, Computer Hardware & Peripherals, Machinery & Machining Tools

Weighing Terminal increases accuracy via software integration.

December 30, 2013

In addition to offering ergonomic weighing, IND890 touchscreen terminal supports IND890count software application which ensures consistent and accurate counting while aiding access to process data for informed, real-time decision making. Software is designed for multi-mode piece counting and supports various counting modes – additive counting, totalizing, neutral measurement, and subtractive counting – for flexible use in numerous applications. Read More

Test & Measuring Instruments, Computer Hardware & Peripherals, Software

Weighing Terminal offers software for filling and dosing.

December 19, 2013

To avoid inconsistent product quality that can lead to bad batches and wasted materials, Model IND890 is available with software that allows users to monitor and control filling and dosing in industrial applications. Windows-based terminal offers ergonomic weighing and has memory capable of storing 999 sets of target parameters, allowing switchover between processes with little room for user error. Read More

Test & Measuring Instruments

Weigh Modules offer solutions for 100% in-process control.

December 2, 2013

Integrated into various machines and instruments, Weigh Modules can be used to check completeness of parts, kits, or modules as well as quality of surface where material is added or subtracted. In automated process, modules can detect violations of weight tolerance of 1 ppm in split second, enabling 100% inspection without sacrificing high throughput. Weigh Modules are tested with traceable weights to comply with TS16949 and ISO9001 standards. Read More

Test & Measuring Instruments

Hygienic Food Scales offer multiple modes, connectivity options.

October 10, 2013

Optimizing throughput with <1 sec stabilization time, Valor 7000 food service scales feature touchless sensors in front and back that can be programmed to perform various functions and provide touch-free operation. This promotes hygienic workspace and reduces chance of cross contamination. Backlit displays, located in front and back of scale, let 2 operators share one scale and can be read from distance. Capacity and readability combinations are available from 3 lb by 0.0001 lb to 60 lb by 0.002 lb. Read More

Test & Measuring Instruments

Portable Bench Scales combine flexibility and functionality.

September 13, 2013

Available in 5 capacities with readabilities up to 60 lb, Ranger 3000 and Ranger Count 3000 compact bench and counting scales are powered by rechargeable lead acid batteries, offer multiple application modes, and can display results in g, kg, oz, lb, and lb:oz. Ranger 3000 also features weigh below hook to perform specific gravity tests, while Ranger Count 3000 includes parts counting auto-optimization software and low piece weight alert. Both scales offer several communications options. Read More

Test & Measuring Instruments

All Stainless Steel Food Scale withstands frequent washdowns.

September 3, 2013

Suitable for recipe weighing and teaching applications, Alliance/OHAUS Valor 3000™ XTREME Portable Scale calculates in lb, oz, lb:oz, g, kg, or fluid oz of water units and includes specific gravity determination and percent weighing feature. Unit has backlit LCD with 1:3,000 to 1:6,000 display resolution, depending upon model. NSF listed/certified and USDA-AMS accepted, scale is available with stainless steel ice cream holder, french fry and taco holder, and sandwich pan. Read More