Balances & Scales

Test & Measuring Instruments, Transportation Industry Products, Sensors, Monitors & Transducers

Vehicle-Scale Conversion Kits optimize scale performance.

February 23, 2015

Available for non-METTLER TOLEDO scales, POWERCELL® PDX® load cells eliminate need to replace entire scale. Conversion kits with NTEP approval are available for Avery Weigh-Tronix Model FCTS, Fairbanks Type S Lever, and Rice Lake Survivor® OTR models. Operating without junction boxes, POWERCELL® PDX® load cells maintain accuracy despite changing environmental conditions. Built-in predictive diagnostics verify performance of each load cell and simplify maintenance. Read More

Test & Measuring Instruments, Mechanical Power Transmission, Electronic Components & Devices

Integrated Measuring System features inductive design.

November 17, 2014

Available for ball and roller rail systems, IMS-I provides feedback for distances up to 4,500 mm, and allows several runner blocks to be positioned independently of each other on same rail. Scale is integrated into profiled rail and protected by tightly welded stainless steel strip across entire rail section length. Rated for positioning accuracy of 0.25 µm with scale precision of ±3 µm/m, inductive measuring system operates without physical contact and is therefore wear-free. Read More

Test & Measuring Instruments

Crane Scale serves medium-duty industrial applications.

November 6, 2014

Offering capacities from 100–1,000 lb, CS750™ crane scales are available in NTEP-certified models and with RFX™ Wireless Weighing Technology. Device is powered by 4 D-cell batteries for up to 800 hr continuous or 5,000 hr in standby mode. Keypad functionality includes tare setting as well as ability to accumulate and total series of weight readings directly on scale. If direct power is required, optional direct power cord with quarter-turn military-spec coupler is included. Read More

Test & Measuring Instruments

Excavator Scales mount to Liebherr crawler excavators.

October 30, 2014

Available for Liebherr R 936 to R 980 SME Crawler Excavators, Trimble® LOADRITE® X2350 Excavator Scales accurately weigh material in bucket and display payload information on monitor in cab. Scales are suitable for common bucket excavator applications, including pit-loading, construction, truck load out, crusher feeding, landscaping, and material handling. Read More

Test & Measuring Instruments

Certified-Accurate Checkweigher targets food can lines.

October 9, 2014

Combining Versa checkweigher controller technology and Teorema weigh table with no moving parts, Versa Teorema operates at line rates up to 660 cans/min. System is equipped with touchscreen control, helix infeed, and high-rate reject system. Featuring stainless steel construction for wet and harsh environments, system can checkweigh both closed and open cans. UK's NMO has certified that checkweigher is in compliance with European Council Directive 2004/22/EC for measuring instruments. Read More

Test & Measuring Instruments, Green & Clean

Wheel Load Scales feature solar charging.

September 29, 2014

Standard on PT300™, PT300DW™, LP600, and LP600-15T™ Wheel Load Scales, solar charger built into scale indicator allows scales to operate continuously without requiring direct power charging. Solar boost makes scales more turnkey and eliminates need to recharge batteries in between uses. Read More

Test & Measuring Instruments, Controls & Controllers

Weighing Terminal supports optional PROFINET IO interface.

September 9, 2014

Capable of supporting simple to complex, stand-alone to integrated, weighing and control applications, IND780 offers interfaces for up to 4 independent measuring channels for scales or flow meters and also supports optional PROFINET® IO interface for data exchange. Other communications interfaces include 4–20 mA output, serial, Ethernet TCP/IP, and USB. OS with graphical display and SmartTrac™ improves speed and accuracy of manual or semi-automatic operations via 3 display modes. Read More

Test & Measuring Instruments

Gas Cabinet Scales integrate with monitoring systems. .

August 27, 2014

Available in all Gas Cabinet Scales, 4–20 mA circuit board has 2-wire lead which integrates scale with main control system. Board transmits scale signal using current rather than voltage, and innate integrity of current loop permits signal transmission over long distances, past display to main system indicator, without being affected by voltage fluctuations, resistance, or electrical noise. Since 4-20 mA current loop remains constant, control center receives strong signal from load cell. Read More

Test & Measuring Instruments

IBC Tote Scale integrates 360 gal spill containment capacity.

August 27, 2014

Intended for industrial and chemical process industries, Model 4042-63 IBC-WE™ weighs and stores IBC tanks up to 52 x 52 x 61 in. with accuracy to within 0.1%–0.5%. Weatherproof polyethylene enclosure provides safe and secure protection of outdoor-stored totes and prevents unauthorized access to them. With 0–8,500 lb gross weighing capacity, corrosion-resistant scale features 4-load cell design that enables IBC totes to be placed anywhere on containment platform without requiring leveling. Read More

Test & Measuring Instruments

Gas Cabinet Scale accommodates dewars and large cylinders.

August 26, 2014

With base sizes measuring 15, 24, and 30 in. square, Model 4000SS™ accurately weighs up to 1,000 lb to within ±0.5% of capacity. Unit features stainless steel construction, corrosion-resistant plating, and silicone-coated NTEP-approved load cells. Standard 3½-digit wall mountable LCD, providing clear readout to nearest 1 lb/kg or 0.1 lb/kg, is housed in NEMA 4X, UL-approved enclosure which is resistant to chemicals. Remote mounting option permits display to be located up to 200 ft from base. Read More

Test & Measuring Instruments

Gas Cabinet Scale features stainless steel construction.

August 26, 2014

Designed for weighing cylinders 9 in. diameter or less, Model 2308™ is suitable for gas cabinets found in fire protection, liquefied gas, laboratory, and medical gas industries. Unit consists of 9 x 9 x 1 in. base and wall-mountable, digital 3.5 in. LCD with lb/kg readout and 4–20 mA output standard. Display, including internal electronics, is housed in NEMA 4X, UL-approved enclosure which is resistant to chemicals. Weighing loads up to 349 lb, scale offers accuracy to within ±0.5% of capacity. Read More

Test & Measuring Instruments

Spill Containment Scale serves industrial, municipal applications.

August 25, 2014

Compliant with secondary spill containment requirements of EPA, OSHA, and other regulatory agencies, Model 4042 ECO weighs containers up to 1,500 lb with accuracy to 0.5% or 0.1%–0.25% of full capacity depending on readout indicator type. Design locates load cell under front edge of base frame, and base stands over spill containment basin. While 26 in. scale base, made of powder coated steel, accommodates 18–26 in. dia drums, steel guide rail along back edge assists in centering cylinders. Read More

Test & Measuring Instruments

Digital Gas Cabinet Scale weighs up to 12 in. dia cylinders.

August 22, 2014

Designed for use in gas cabinets, corrosion-resistant Model 2308-12 comprises 12 x 12 x 1 in. base and wall-mountable, digital, 3.5 in. LCD. Latter features pounds/kilograms readout and 4–20 mA output. Along with stainless steel housing, construction includes silicone-coated load cells and 4-point suspension of weighing platform. Scale weighs with resolution to within 0.1 lb for loads of up to 199 lb, handles loads up to 349 lb, and has accuracy to within ±0.5% of capacity. Read More

Test & Measuring Instruments

Water Vapor Transmission Tester supports inverted cup weighing.

June 13, 2014

Featuring independent, 3-chamber testing with weighing mechanism, Labthink PERME W3/031 Water Vapor Transmission Rate System allows individual testing data for 3 samples to be obtained in one test. Arbitral weighing method allows water vapor transmission rate testing, and humidity and temperature control capability are standard. Along with wind speed regulating function, features include permeability test with optimized sensitivity to data produced in process. Read More

Test & Measuring Instruments

Counting Scales display count, weight, and piece weight.

May 12, 2014

Designed to meet or exceed NIST Class III accuracy requirements, Alliance/Ohaus® Ranger® Count 3000 Series offers 1:1.5 million internal counting resolution, 1 second stabilization, and 30 item library data storage function. Units feature 8 function keys, full numeric keypad, and 3 backlit LCDs that highlight count, weight, and piece weight. Available with 3–60 lb capacities and RS232 port, scales provide low Average Piece Weight alert and automatic APW recalculation as overall weight increases. Read More

Test & Measuring Instruments, Sensors, Monitors & Transducers

Weigh Modules continuously monitor load cell performance.

May 8, 2014

By providing continuous load cell monitoring, SWB605 PowerMount Weigh Modules discover variances before they impact productivity, allowing manufacturers to avoid errors such as load cell overload and out-of-range temperatures. POWERCELL-equipped load cells with on-board microprocessors also adjust weighing signal to compensate for environmental changes. This allows modules to provide accurate weighing regardless of temperature, linearity, hysteresis, and creep. Read More

Test & Measuring Instruments

Weighing Terminal is designed for use in hazardous areas.

April 11, 2014

Compliant with ATEX, FMus+c, and IECEx standards, ICS466x performs safe and accurate weighing in potentially explosive classified hazardous areas of Zone 1 / 21, Division 1. Intrinsically safe terminal limits power output and prevents sparks or high temperatures in electrical circuit that can ignite surrounding atmosphere where flammable gas, dust, or fibers exist. Stainless steel housing is corrosion resistant, and operation menu affords flexible operation.
Read More

Test & Measuring Instruments

Weighing Terminal promotes formulation consistency via software.

February 18, 2014

Supporting IND890form software, IND890 offers flexible, ergonomic weighing. Software offers advanced formulation control for flexible use in industrial applications and lets users monitor and control vertical or horizontal batch campaigns – respectively, those that add each ingredient in one mixing vessel or add each component to multiple vessels before moving to next component. IND890form switches over from one type to other without any room for user error. Read More

Test & Measuring Instruments, Material Handling & Storage, Fluid & Gas Flow Equipment, Mechanical Power Transmission

Sanitary Clamping Coupling helps protect fragile products.

January 14, 2014

Quick Clamp No-Ledge delivers machined tolerance joint, ensuring proper alignment and creating ledge-free interior environment on connection points. This reduces instances where friction and crevices catch product and cause fines. Designed for food and light industry conveying of fragile materials or materials requiring sanitary conditions, coupling offers recessed O-ring gasket that delivers smooth transition through positive sealing metal-to-metal joint.
Read More

Test & Measuring Instruments, Computer Hardware & Peripherals, Machinery & Machining Tools

Weighing Terminal increases accuracy via software integration.

December 30, 2013

In addition to offering ergonomic weighing, IND890 touchscreen terminal supports IND890count software application which ensures consistent and accurate counting while aiding access to process data for informed, real-time decision making. Software is designed for multi-mode piece counting and supports various counting modes – additive counting, totalizing, neutral measurement, and subtractive counting – for flexible use in numerous applications. Read More