Process Visibility App offers mobile access to manufacturing data.

October 9, 2015

Bringing mobile process visibility to owners of FactoryLogix software, Aegis inSite converts iPhone, iPad, or iPod Touch into mobile portal. Users can access manufacturing and traceability (forward and reverse) information needed to obtain BI and make strategic decisions, show depth and instant availability of information from plant, and gain immediate access to WIP status, yield, and problem points. Users can also recall and display CAD images by serial number.
Read More


Structural Design Software automates building analysis.

October 9, 2015

With Tekla® Structural Designer, engineers can analyze and design steel and concrete buildings by combining analysis and design into single, seamless process. Program offers expanded beam design options as well as expanded seismic analysis and design features that automate accidental torsional effects and required seismic design combinations. Other time saving features include automation of tedious and complex tasks such as wind loading calculations, floor vibration checks, and floor loading. Read More


MES and Quality Management Software streamline processes.

October 8, 2015

Version v5.2 of Eyelit Manufacturing and Eyelit Semiconductor Edition suites incorporate Run-to-Run (R2R) integration template, which enables dynamic adjustment of equipment processing through feed-forward controls. Eyelit Special Processing/SWR module simplifies experimentation and adjustments through Eyelit RMS module, which lets users refine processes/products. To help reduce cycle time and increase throughput, Eyelit Advanced Dispatching includes configurable dispatching criteria. Read More


FPGA Design Software optimizes power consumption and more.

October 6, 2015

Used for development of FPGA products, Libero system-on-chip (SoC) v11.6 supports RTG4™ high-speed signal processing radiation-tolerant FPGAs and enhances usability for DDR and high-speed serial designs. RTG4 support includes IO Advisor, SmartPower, and uProm support, and additional features are available for SmartFusion™2 SoC FPGAs and IGLOO™2 FPGAs. Solution automatically optimizes hold violations using minimum delay repair and provides multi-pass options in layout for large designs. Read More

Electrical Equipment & Systems, Green & Clean, Software

Power Plant Platform meets data-driven, secure power demands.

October 6, 2015

Digital Power Plant creates virtual Digital Twin of entire industrial power plant complex. Powered by Predix platform, Digital Twin comprises physics-based methods and digital technologies used to model present state of every asset in Digital Power Plant or a Digital Wind Farm. This technology lets utilities monitor and manage every aspect of the power generation ecosystem to generate electricity as cleanly, efficiently, and securely as demanded with real-time control and precision. Read More


CAD/CAM Software facilitates modelling, accelerates simulation.

September 28, 2015

Offering 2D drawing, 600+ pieces of relief clipart, as well as 2D and 3D machining functions, ArtCAM Express 2015 R2 provides introduction to computer-based manufacturing for those involved with engraving, routing, or other areas of decorative metalworking and woodworking. In addition to various features which enhance modeling endeavors, integrated algorithm accelerates machining simulations by using processor in computer’s graphics card to calculate thousands of operations simultaneously. Read More


Meshing Software features native interfaces to CFD codes.

September 28, 2015

Capable of generating structured, unstructured, and hybrid meshes, Pointwise v17.3 R4 includes open source PyFR advection-diffusion solver as native interface. Program also includes support for Engineering Sketch Pad, an open-source, browser-based, constructive solid, CAD system. ESP targets multi-disciplinary analysis and optimization by aiding computation of sensitivity of objective functions (lift and drag, for example) with respect to design parameters (wing sweep, for example). Read More


Software Suite improves survey, CAD, and GIS workflows.

September 21, 2015

Promoting efficacy when working with GIS databases, Trimble Business Center v3.60 provides editing and QC options for surveyors and GIS professionals. CAD and drafting tools let CAD professionals create final project deliverables within Trimble Business Center. In addition to tools for generating precise and accurate data, software enables surveyors to post process individual GNSS constellations. In addition CAD package compatibility, software enables production of client deliverables. Read More


CAM Software supports high-efficiency roughing.

September 21, 2015

With optimized Vortex area-clearance strategy, FeatureCAM 2016 enables fast, safe metal removal from solid carbide tooling, in particular designs that give deeper cuts by using full flute length as cutting surface. Software offers ability to adjust and fine tune non-cutting moves of 2.5D and 3D Vortex toolpaths, and supports multi-tasking bar-fed milling machines. For users of FeatureTURN, selection of turning tools has been simplified with ability to use single tool in multiple orientations. Read More


Software Development Tool aids automotive network design.

September 15, 2015

OptoLyzer® Studio reduces complexity of automotive CAN and LIN network development for designers, testers, and system integrators. Able to integrate into larger internal development and test environment or connect to other hardware tools from any third party, .NET-based software development tool provides system and device development features which allows use of common file formats and offers opportunity to let users create software extensions by adding their own functionality. Read More


Scan Software accelerates workflow of 3D measuring process.

September 14, 2015

Utilizing intelligent algorithms to evaluate geometric and radiometric features of scanned object, OPTOCAT 2015R2 enables single captures of scan process to be aligned automatically without help of photogrammetric index markers. Program also provides back projection of measuring results in full color directly onto measuring object. Adaptive full color projection technique enables not only projection of color patterns, but also of measurement results. Read More

Software, Test & Measuring Instruments

Portable M-PHY Protocol Analyzer supports UniPort/UFS.

September 4, 2015

Eclipse X34 monitors, captures, decodes, and analyzes protocol traffic from multiple interfaces: SSIC, MPCIe, and UniPort/UFS. Configurable analyzer, supporting GEAR1, GEAR2, and GEAR3 at high speeds and G0-G7 at low speed and low power, captures up to 4 lanes of data traffic (up to 8 when linked to another Eclipse X34). Trace-buffer options exist for up to 3 GB for single analyzer and 64 GB in 2-unit expanded mode. Probing options include SMA, multi-lead solder down, and mid-bus probing. Read More


Structural Analysis Software includes 3D CAD modeler.

September 3, 2015

Equipped with 3D CAD modeler and 64-bit multi-processor solvers, GT STRUDL® 2015 offers fully integrated, database-driven system for frame and finite element linear and nonlinear static and dynamic analysis as well as comprehensive steel and reinforced concrete design. CAD modeler enables users to create simple to highly complex structural models for analysis and design purposes and to display analysis and design results using same CAD interface that most engineers already use. Read More

Software, Services

Online 3D Model Library streamlines architectural workflow.

September 2, 2015

Offering built-in parameters, metadata, and additional intelligence, online Architect Library provides links to individual product files in 3D Revit® building information models (BIM) as well as compressed bulk files for Ultra Series and VistaLuxe Collection window and door families. BIM tools allow architects to view products from different perspectives while incorporating design options and customization within models for projects. Read More

Safety & Security Equipment, Software

Emergency Response System offers web-based communications.

August 31, 2015

Included in Rapid Emergency Response System, Command & Control Incident Management System uses web-based communication portal to manage life-threatening events such as armed intruders and natural disasters. When activated, text/email/voice notifications are sent to pre-determined stakeholders and Command Group is established. Command Group accesses portal via internet-enabled device for secure 2-way communication with first responders and occupants as well as link to live security camera video. Read More


Design Management Software fosters customer collaboration.

August 27, 2015

Pilot-ICE enables design firms, architectural studios, project offices, and design departments of industrial firms to store, track, and analyze project data. Functionality also promotes collaboration between companies and their customers and sub-contractors. Software uses virtual cache drive on virtual file system (Pilot-Storage), which becomes visible to all connected computers, and all virtual cache drive content is synchronized automatically with server. Read More


CAD Software supports bearing design and rotor dynamics.

August 20, 2015

Used for design, redesign, and analysis of turbomachinery, AxSTREAM is available with AxSTREAM Bearings module, which allows users to design and analyze detailed models of bearings for different configurations by performing steady-state, transient, and map analysis. Module’s capabilities produce results used in rotor dynamics analysis. AxSTREAM RotorDynamics performs this analysis of firm and dynamic characteristics of rotating machinery. Read More

Transportation Industry Products, Software, Services

Dispatch Software uses cell, GPS, and Android technologies.

August 19, 2015

Available to run from Android-based devices such as smartphones, tablets, and PCs, Mobile Dispatch provides Automated Driver Location tracking, allowing dispatchers to track progress of deliveries and assign pickups to drivers throughout day. Android functions empower drivers enabling them to open and close orders, scan barcodes, take pictures for OS&D claims, send messages to Dispatch, and capture signatures. Read More


Engineering Software handles complex simulations.

August 13, 2015

ANSYS® v16.2 lets engineers create virtual prototypes of complete systems. Performance is bolstered by integrating functionality of ANSYS Simplorer® multidisciplinary systems modeling platform, ANSYS AIM® integrated multiphysics simulation environment, ANSYS Customization Toolkit (ACT), and ANSYS SCADE System Avionics Package™. Latter addresses critical workflow and automation for complex systems engineering by automating development of embedded software systems for avionics. Read More


CAD Software optimizes modeling and reverse engineering.

August 12, 2015

Combining solid, surface, and direct modeling with reverse engineering, PowerSHAPE Pro 2016 minimizes need to transfer data between programs. Groups of features can be copied between 2 solids in single operation, and axis direction of any number of surface or solid primitives can be edited simultaneously. For reverse engineering of prismatic parts, software can identify planes, cylinders, cones, and other primitives, or create wireframe arcs and lines directly from probed points. Read More