Quadrant Engineering Plastic Products Inc.
Reading, PA 19612-4235
Aug 01, 2008 With flexural modulus in excess of 1,400,000 psi and moisture absorption of .10%, Semitron MDS 100 is suited for sockets for semiconductor test and package equipment and fixtures for electronics testing. Offered in thicknesses from .04-.236 in. in sheet sizes of 9.84 and 19.68 in. square, it features coefficient of linear thermal expansion of 1.1 x 10^-5, and heat deflection, or softening temperature, of 210°C.

Acrilex, Inc.
Jersey City, NJ 07305 1122
Aug 01, 2008 Designed to reproduce look of upscale, patterned, tempered glass, Acriglas® Clear Impressions series has crystal clarity and can be made with textures on one or both sides of sheet. Textures included are Brushed, Woven Silk, Mesozoic, Precambrian, Box Mini-Flute, Waffle Iron, Techno, and Morning Dew. Offered in standard size of 4 x 6 ft and in thickness ranging from 1/8 to ½ in., sheets can be thermoformed to create custom light fixtures or configured to meet any specification.

Cool Polymers
Warwick, RI 02886
Jul 07, 2008 With ability to dissipate heat, CoolPoly® thermally conductive polymers are suited for wound coils and other electronic components and devices. Including reduced surface and part temperature, injection moldable polymers are designed for applications in molded bobbins and other wound devices such as solenoids, ignition and clutch coils, surface mount coils, and transformers.

Elastocon TPE Technologies, Inc.
Rochester, IL 62563
May 02, 2008 STK thermoplastic elastomers adhere to polycarbonates (PC), ABS, PC/ABS blends, nylon, HIPS, and copolyesters. Available in 1,000 lb quantities in either natural or black, they feature Shore A range of softness from 50A to 70A and no drying is required. TPEs are suited for wide range of applications such as tools and hardware, housewares/utensil grips, personal care products, safety face masks, home and garden tools, and toys.

Cool Polymers
Warwick, RI 02886
Apr 21, 2008 Suited for heat sinks and thermal management solutions, CoolPoly® thermally conductive injection molding grade thermoplastics offer no amplification of electromagnetic or radio frequency interference and no magnetic coupling. E-series is electrically conductive and provides inherent EMI/RFI absorption, while D-series is electrically insulative and produces no signal interference. Features include thermal conductivity of 20 w/mk, thermal diffusivity of 0.1 cm²/sec, and density of 1.7 g/cc.

Norplex Micarta
Postville, IA 52162
Nov 02, 2007 Composed of electrical grade epoxy resin combined with woven glass substrate, NP511B can be molded in conjunction with abrasion-resistant substrates such as Kevlar(TM) or Nomex(TM) to minimize or eliminate surface wear damage to copper and steel components in generators. Non-brominated resin system offers mechanical strength at temperatures to 170°C. When cured properly, NP511B retains half of its room temperature flexural strength at temperatures to 150°C.

Tri-Mack(TM) Plastics Manufacturing Corp.
Bristol, RI 02809
Oct 22, 2007 Tri-Mack Maxton® H-3 is thermoplastic friction/wear material for producing journal- and plane bearings, vanes, seals, thrust washers, piston rings, and related parts. Able to be custom molded and machined with ±.0005 in. tolerance in complex shapes from 1/8 x ¼ in. up to 24 in. dia., material exhibits 26,400 psi flexural strength, 17,800 psi tensile strength, 3.9 psi x 106 flexural modulus, 2.9 W/MK thermal conductivity, and is non-abrasive for use against stainless steel and aluminum.

Norplex Micarta
Postville, IA 52162
Jun 06, 2006 Used in precision creasing of paper sheets and cardboard, MC704 thermoset composite maintains thickness tolerances and withstands repetitive wear over long periods of time. Counter plates made of this material remain flat and dimensionally stable when subjected to heat and vacuum conditions. Core material provides smooth, mar-free crease when pressed against carton material. Flexible version, MC704MF, is also available.

Mearthane Products Corp.
Cranston, RI 02921
Feb 13, 2006 Designed for media-transfer equipment that generates tribocharge through roller or belt friction, Durethane(TM) has conductive properties that are homogeneously modified at molecular level via RoHS-compliant additives at levels from 0.1-1% by weight of total material. Durethane ESD properties are customizable in solid materials from E5 to E10 ohm-cm at hardness of 5 Shore A-70 Shore D and in open- or closed-cell foams from E7 to E10 ohm-cm at hardness of 1A-90A.

Axcell (Heyco Products, Inc.)
Toms River, NJ 08755
Jul 11, 2005 Incorporating custom size and shape keyhole openings in domed hole plug, Keyhole Plugs are constructed from polyamide 6/6 nylon that conforms to ASTM standard D-4066-PA111. They lock in place with fingertip pressure, providing seal that withstands up to 35 lb of pushback force. With flammability classification of 94V-2 and ability to tolerate temperatures up to 125°C, plugs are targeted for use in electrical enclosures and housings.

Advantapure, Div. Of NewAge Industries
Southampton, PA 18966
Jul 08, 2005 Offered as extruded tubing or injection molded components, FlexiPreneâ„¢ pharmaceutical grade TPE (thermoplastic elastomer) may be heat sealed, welded, or sterilized by autoclave, gamma radiation, or EtO. Injection moldable material allows for leak-free connections and eliminates entrapment issues in manifolds and assemblies. Free of silicone oils and animal-derived ingredients, flexible tubing offers resistance to kinking and comes in 3/32–1½ in. OD sizes.

E-A-R Specialty Composites
Indianapolis, IN 46268 1650
Mar 21, 2005 ISODAMP C-8002 thermoplastic molding material dissipates energy internally, at molecular level, minimizing vibration amplification at resonance to restore equilibrium to sensitive, precision systems. Injection-moldable formulation is environmentally clean, wear-resistant, and adhesive-friendly. Flame-resistant to UL 94 V-0, soft and pliable product is available in custom-engineered configurations or range of standard grommets, mounts, and isolators.

Slideways, Inc.
Worcester, MA 01605
Nov 11, 2004 Custom Machined Plastic Components are produced from materials such as oil-filled nylon for handling high speeds and loads, MD-nylon which features dry lubricant to prevent dust from adhering to wear strips, acetal where stiffness is needed, glass-filled PTFE for chemical resistance, UHMW, and UHMW-HT. Capable of achieving tolerances to ±0.0005 in. and surface finishes to 16 rms, components can be produced in prototype to production quantities.

Fibox Enclosures
Glen Burnie, MD 21061
Sep 28, 2004 Machining Service provides fast turnaround on enclosure modifications including threaded and unthreaded holes, and panel, door, side, and window cutouts. Graphics converter accepts files from different CAD programs and converts them to machining instructions. CAM files can be developed from print drawings. Assembly service equips enclosures with accessories including cable management products, mounting plates, terminals, switches, and glands.

Kintz Plastics, Inc.
Howes Cave, NY 12092
Apr 29, 2004 In-house painting facility runs 3 shifts so thermoformed part can be prepped, painted, and shipped within hours after it is formed. Screen Printing and Hot Stamping place logos, model designations, warnings, and other prominent information on thermoformed part. RFI and EMI shielding to interior of panels for electromechanical and electronic products is applied to exact specifications. Unlimited combination of surface finishes and textures are offered.

Kintz Plastics, Inc.
Howes Cave, NY 12092
Mar 16, 2004 Pressure forming utilizes vacuum pressure to 22.5 psi to draw heated plastic into cavities of mold and positive air pressure to 100 psi to push it into recesses of mold. Combination of negative vacuum pressure pulling and positive air pressure pushing results in parts, panels, and components with sharp detail, precise surface texture, and tight radii. Process employs pneumatically activated molds with movable sections for product removal.

E-BEAM Services, Inc.
Cranbury, NJ 08512
Mar 09, 2004 Post-molded crosslinking process enables polyethylene (PE) products to maintain form and strength at temperatures over 350°F. Electron-beam-processed, crosslinked materials can be used in utility services subjected to high temperatures and stress fatigue situations as crosslinking process reduces stress-crack and wear-resistance failures. PE products can be treated after forming by injection molding, rotomolding, or other processes.

Stratasys, Inc.
Minneapolis, MN 55344 2020
Feb 27, 2004 Type PC-ISO meets ISO 10993-1 and USP Class VI standards and is suited for food, pharmaceutical, and medical equipment modeling. It can be sterilized using gamma radiation or ethylene oxide method. Available in translucent and white, product is suited for T-Class rapid prototyping systems. Components built from translucent PC-ISO allow viewing of solid or liquid material flow. Model-layer thickness choices include 0.007 and 0.010 in.

Sheltech Plastics, Inc.
Methmen, MA 01844
Jan 29, 2004 Medical/Laboratory Plastic Packaging is custom vacuum-formed with cavities that precisely cradle products and can include ribs, standoffs, and hold-down structures to support and protect from crushing and dropping. Made from styrenes, PVCs, and PETGs, packaging permits visual inspection of parts and can be sterilized. It meets FedEX drop, compression, and vibration tests according to ISTA test procedure standards 1A for packages under 150 lb.

Kintz Plastics, Inc.
Howes Cave, NY 12092
Nov 05, 2003 Twin-Sheet Thermoformed Plastic Panels offer OEMs alternative to injection molded or rotational molded plastic parts. Both sides feature precise form and definition and can include built-in patterns for additional vertical, horizontal, or diagonal rigidity. Space between sheets can be filled with thermal or acoustical insulation. Sizes up to 9 ft wide x 13 ft long are available with up to 60 in. draw.