Photo Sciences, Inc.
Torrance, CA 90505
Nov 20, 2007 Multifaceted microlithography techniques pattern photoimageable color polymer-coated substrates using direct-write laser, direct-write e-beam, optical reduction, and full field exposure lithography. Photoimageable color polymers provide means of producing microscopic patterns in various standard colors as well as custom polymer colors. Line widths can be produced as small as 2 microns in color polymers, offering compatible with nanoscale applications.

Silterra Malaysia Sdn Bhd
Kedah Darul Aman   Malaysia
Nov 09, 2007 Suited for devices used in construction of TFT panels, 0.16 µm High Voltage Technology features 3.17 µm² SRAM bitcell which facilitates high density embedded memory design in display driver for QVGA (240 RGB x 320) and WQVGA (320 RGB x 432, Wide-Quarter-VGA) TFT panels. Technology offers asymmetry high voltage well for denser design, one-time-programmable cell for gamma color tuning, ESD protection, and metal capacitors design guidelines.

Norplex Micarta
Postville, IA 52162
Nov 02, 2007 Composed of electrical grade epoxy resin combined with woven glass substrate, NP511B can be molded in conjunction with abrasion-resistant substrates such as Kevlar(TM) or Nomex(TM) to minimize or eliminate surface wear damage to copper and steel components in generators. Non-brominated resin system offers mechanical strength at temperatures to 170°C. When cured properly, NP511B retains half of its room temperature flexural strength at temperatures to 150°C.

Tri-Mack(TM) Plastics Manufacturing Corp.
Bristol, RI 02809
Oct 22, 2007 Tri-Mack Maxton® H-3 is thermoplastic friction/wear material for producing journal- and plane bearings, vanes, seals, thrust washers, piston rings, and related parts. Able to be custom molded and machined with ±.0005 in. tolerance in complex shapes from 1/8 x ¼ in. up to 24 in. dia., material exhibits 26,400 psi flexural strength, 17,800 psi tensile strength, 3.9 psi x 106 flexural modulus, 2.9 W/MK thermal conductivity, and is non-abrasive for use against stainless steel and aluminum.

austriamicrosystems AG
Premstatten   Austria
Oct 19, 2007 Based on Cadence v5.1.41, HIT-Kit v3.72 provides users with industry benchmark design environment for 0.35 µm High-Voltage CMOS process H35. It includes periphery cell libraries up to 50 V as well as set of 20 V devices optimized for power management products and display drivers in battery-powered applications. Along with circuit simulation models, features include design utilities such as SOAC tool, automatic layout generators, and guard-ring generation.

Makino Inc.
Auburn Hills, MI 48326
Sep 28, 2007 Designed for shops manufacturing parts for aerospace, medical, and injection mold markets, SP and U series Wire EDMs feature SurfaceWIZARD(TM) technology that is suited for use in poor flushing conditions where nozzles cannot be sealed on work surface. SurfaceWIZARD is developed for tool steels up to 4 in. thick, eliminates witness lines, supports 0.008 and 0.010 in. dia wires, and maintains part straightness within 5 and 2.5 microns in 1- and 2-pass machining, respectively.

Johnson Controls GmbH
Burscheid 51399  Germany
Sep 21, 2007 PP Thin Film method consists of composite foil comprised of multiple, primarily polypropylene layers in direct mold-behind process. Degree of glossiness can be varied and scratch-resistant films can be adapted to match finish of adjacent parts. Enabling production team to monitor wall thickness and reduce material consumption, one-step RIM alpha surface technology process allows strategic surface weakening to be included to accommodate airbag openings.

Applied Plastics Co.
Norwood, MA 02062
Sep 07, 2007 Developed for motors, stators, and gyroscopes, Stacking and Coating Service holds lamination alignment to within ±0.0005 in. and includes deburring and application of blue epoxy coating from 0.002-0.005 in. thick in one pass. Suited for laminations from 3/8-8 in. OD, smooth finished parts offer electrical resistance up to 1,000 V/mil and help prevent wire cuts and shorts. Metal laminations, bobbins, and end caps can be made from Arnon 7 high carbon steel or Magnesil.

Photo Sciences, Inc.
Torrance, CA 90505
Aug 24, 2007 Using photo chemical milling process, Photo Sciences can etch holes as small as 2.5 µm completely through thin sheets of metal. Etched features on metal parts have smooth, well-defined edges, making them suited for deposition masks or as apertures for optical applications. Chemical milling process specifically allows sub micron tolerances and complex patterns, which can be combined with in house design, CAD, and photo tooling capabilities.

Rogan Corp.
Northbrook, IL 60062
Aug 20, 2007 Liquid silicone rubber (LSR) used in molding service molecularly bonds with thermoplastic substrate parts. To eliminate handling and assembly of individual rubber and plastic components, tooling and overmolding techniques allow consolidation of silicone rubber and plastic into single composite part. Utilizing LSR's heat and chemical resistance, memory, and biological inertness in form of molecular-bondable material lets designers develop components that meet performance requirements.

Elma Electronic Inc.
Fremont, CA 94538
Aug 15, 2007 Suited for medical products, industrial enclosures, and various commercial applications, Type 35 Variety Case allows exact sizing of enclosure. Aluminum extrusions are cut to any specified length, and can accept tapped strips, sealing cords for EMC, optional direct mounting of panel or PCB, grounding terminals, or screws. Enclosures have conductive inner surface and sufficient contact points for EMC, and removable side panels that allow access to inside components.

ON Semiconductor, LLC
Phoenix, AZ 85008
Aug 14, 2007 HighQ(TM) copper on silicon integrated passive device (IPD) manufacturing services are available for those with ready-for-production product and those needing custom product designs. This 8 in. wafer technology, for production of passive devices used in portable and wireless applications, offers thick copper inductors, MIM capacitors (0.62 fF/µm²), and TiN resistors (9 W/square). Products withstand -65 to +150°C temperature cycling and can operate in 150°C for up to 504 hr.

ClickSoftware Technologies Ltd
Burlington, MS 01803
Aug 09, 2007 Available as add-on feature to ClickSchedule and ClickMobile, Street-Level Routing Tool incorporates real-time traffic data so field technicians can avoid snarls that delay service, ensuring on-time arrivals. ClickSchedule and ClickMobile receive online traffic updates on an as-needed basis, and compare that information to GIS routes between jobs. If traffic updates indicate problem, ClickSchedule and ClickMobile can automatically reroute field technicians to faster path.

Taiwan Semiconductor Manufacturing Company, Ltd.
Hsin-Chu 300, R.O.C.  Taiwan
Aug 09, 2007 With advanced standard cell, standard I/O, and SRAM compiler, Reference Flow v8.0 provides mature design flows for mainstream technologies from 0.13-0.25 micron. It offers intra-die statistical timing analysis along with statistical leakage and statistical timing optimization. Automated DFM (design for manufacturability) hot spot fixing eliminates need for manual correction, while DFM electrical variability consideration monitors parametric performance shifts caused by DFM effects.

Epner Technology, Inc.
Greenpoint, NY 11222
Aug 01, 2007 Laser Gold Electroplating eliminates oxidation and diffusion in various substrates. Plating process begins by polishing aluminum reflector to RMS 4 finish, degreasing and aluminum preplate preparation using zincate process follow. Electroless nickel plating with minimum thickness of 0.001 in. is buffed and electrochemically activated prior to gold plating, and electrodeposition of gold layer measuring at least 100 µin. in thickness makes up last step.

Gasser & Sons, Inc.
Commack, NY 11725
Jul 26, 2007 In-House Stamping Services offer exotic metals such as include Kovar, monel and titanium as well as standard materials like nickel, nickel alloys, brass, bronze copper, stainless steel, steel and lead. Features include 10-400 ton presses, and utilization of 3 different development processes namely casting, extrusion, and fabrication. Applications include X-ray housings, lead shielding, electronic casings, and X-ray tube components.

GDS Ltd
Bingley, West Yorkshire BD16 1PE  United Kingdom
Jun 26, 2007 To optimize displays, company uses G-BOND solid transparent bond, which optically couples front glass or touch screen directly to face of display, making sunlight readability possible. It also removes condensation, fogging, and other optical defects and stops foreign matter intrusion that obscures data. G-BOND can be applied to any LCD from any OEM onto display diagonal sizes from 2.5-47 in. Process is useful for ATM screens, outdoor kiosks, and petrol pump displays.

Lexmark International, Inc.
Lexington, KY 40550
Jun 20, 2007 Lexmark Fleet Manager lets channel partners leverage Lexmark enterprise-managed print services capabilities for their customers. With this service, channel partner establishes its own contract directly with customer, delivers value-added service, and provides visibility and control of output environments. ValuePrint program gives partners way to bundle device and supplies costs with partner-led management and break-fix services into single monthly payment for their customers.

AdTech Ceramics Company
Chattanooga, TN 37405
Jun 19, 2007 Blending injection molding with HTCC alumina systems, capabilities include metallization with refractory metal or platinum conductors, nickel and gold plating as required, and ceramic material options. Metal components may be attached with high-temperature braze, and complex 3D shapes are possible without additional machining. Tooling turnaround promotes feasibility for prototype and small production runs of complex shapes.

Parker Hannifin Corp., Cylinder Division
Des Plaines, IL 60016 3198
Jun 18, 2007 Designed for clamping, load holding, or E-stop applications, Series 3MA and 4MA cylinders hold loads in static condition while air pressure is removed from system. Available in 7 bore sizes ranging from 1.125-5.00 in., low friction 3MA cylinders have maximum operating air pressure of 250 psi and operating temperature range of -10 to +165°F. Intended for customization, 4MA units feature -50 to +250°F temperature range, standard and oversize rods, and externally removable rod gland.