BlueLevel Technologies, Inc.    Rock Falls, IL 61071
Mar 12, 2012 With overall insertion length from 18-118 in., Model VHS is suited for top mounting installations where advantages of no calibration and solid-state technology are desirable. Sensor, utilizing piezoelectric technology, will operate with dry and free-flowing powders as well as free-flowing granular materials. Unit has built-in SPDT relay that is fail-safe on power failure, local bi-color LED indicator of normal/alarm status, all stainless steel wetted parts, and NEMA 4X enclosure.

Dwyer Instruments, Inc.    Michigan City, IN 46361
Mar 12, 2012 Constructed with 304 stainless steel housings and brass wetted parts for chemical compatibility, Series SGY offers wide variety of ranges from full vacuum to 1,000 psi. Units have dual psi and bar scales and are available with bottom or back connections. Designed to pop open without being entirely removed or cut, plug on top allows liquid filled units to breath, relieving any built up internal pressures.

Dytran Instruments, Inc.    Chatsworth, CA 91311
Mar 12, 2012 Offering sensitivity of 10 mV/g and 500 g shock limit, Models 3030B4G and 3030B5G feature frequency response of 2 Hz and 5 Hz, respectively. Units are constructed of stainless steel and are hermetically sealed for reliable operation in high humidity and dirty environments. Both incorporate 10-32 axial connector and adhesive mounting capabilities.

Fluid Components Intl.    San Marcos, CA 92069 5115
Mar 09, 2012 With VeriCal Calibration Verification System, ST100 Series combines advanced measurement capability with in-situ calibration for flare gas applications aboard offshore platforms, land-based oil/gas facilities, and chemical plants. Basic insertion style air/gas meter features thermal flow sensing element that measures flow from 0.25-1,000 SFPS with accuracy of ±0.75% of reading, ±0.5% of full scale. Designed for service up to 850°F, meter is available with integral or remote electronics.

Calnetix    Cerritos, CA 90703
Mar 09, 2012 Featuring power amplifiers rated at 3,600 VA/channel, Insight(TM) 3600 provides control of advanced permanent magnet, bias magnet bearings in up to 5 axes. Sensor interface drives and demodulates up to 5 sensor coils, providing position of rotor in real-time, while DSP regulates power amplifier current to drive bearing actuators based on position sensor data. Graphical user interface enables programming, remote monitoring, and diagnostics of system.

Aegis Software    Horsham, PA 19044
Mar 09, 2012 Combining touchscreen operator interface, user information center, and scanning/tracking terminal, inForce connects Aegis software to operators and equipment throughout factory. Touchscreen display delivers alarm and production status information without need for PC. With inForce, Aegis system can physically control conveyor flow, acquire barcode scans, and ensure accurate WIP data transactions. Optional light tower extends visibility to operators where required.

Cognex Corp.    Natick, MA 01760 2059
Mar 08, 2012 Suited for use across all In-Sight® vision system and VisionPro® vision software platforms, OCRMax(TM) can handle character variations, text skew, proportional fonts, and variable string lengths. Segmenting functionality takes each character line and splits it into individual regions that each contains one character, ensuring OCRMax can recognize distorted, touching, and variably spaced characters. Tool can also accommodate uneven surfaces and lighting variations on production line.

Honeywell International, Inc.    Morristown, NJ 07960
Mar 08, 2012 Promoting flexibility for designs with tight space requirements, SS39ET Series comes in SOT-23 SMT package with subminiature footprint. IC responds to North and South poles and monitors magnetic fields from permanent magnet or electromagnet. Operating from 2.7-6.5 Vdc supply while consuming 6 mA at 5 Vdc, IC has thermally balanced design that provides stable operation over full -40 to +212°F operating range. Thin film resistors lend to accuracy and output stability.

Clore Automotive    Lenexa, KS 66215
Mar 08, 2012 SOLAR's 6/12 V, 1.0 A Pro-Logix battery maintainer, PL2110, controls each phase of charging process to ensure each battery serviced gets optimal charge. Compatible with various battery types, device comes in case sealed against dust/debris and features fully automatic operation as well as polarity protection. Quick attach cord on output side facilitates interface with included accessories: battery clamps, ring terminals, and 12 V male adapter.

Key Technology, Inc.    Walla Walla, WA 99362
Mar 08, 2012 Available for new and installed G6 Manta®, Optyx®, and Tegra® optical sorters as well as G6 ADR® Automatic Defect Removal Systems, FoodSafetyPRO(TM) helps food processors maintain recordkeeping in accordance with FSMA, SQF certification, and GFSI certification. Program combines comprehensive system audit, RemoteMD(TM) Premium proactive real-time equipment monitoring, unlimited online training for one year, and online HACCP training for 5 HACCP operators and 1 HACCP manager.

Honeywell International, Inc.    Morristown, NJ 07960
Mar 07, 2012 Providing flow ranges from ±50 to ±750 SCCM, Zephyr(TM) Analog and Digital Airflow Sensors offer Total Error Band as low as ±2.25% FSS, allowing accurate airflow measurement. Stability minimizes errors due to thermal effects and null shift, providing accurate readings over time and often eliminating calibration after PCB mount. Potential applications include fuel cells, gas meters, and HVAC filters as well as hospital diagnostics, patient monitoring, and ventilators.

CJPS Enterprises, LLC    Auburn Hills, MI 48326
Mar 06, 2012 NOMAD(TM) Telemetry System (NTS) consists of set of vital signs monitors which can be used with any Windows®-based PC, laptop, or tablet using NTS software to monitor patient data remotely in real-time. Telemetry system does not require any installation, proprietary equipment, or dedicated servers. Users can watch up to 64 bedside monitors via plug & play technology, decentralizing central nursing station. Units come in 32-, 64-, and 128 monitor bundles, but can be customized in other configurations.

Baumer Ltd.    Southington, CT 06489 1534
Mar 05, 2012 Featuring die-cast housing with coating that delivers C4 protection against corrosion, IP66-rated HOG 86 Hollow Shaft Encoders provide motor/generator feedback as well as speed and position control. Bearings are protected against inductive shaft currents, while optional ceramic hybrid ball bearings provide up to 100,000 hr of longevity. Operating in ambient temperatures from -40 to +100°C, encoders are available in terminal box version featuring separate compartment with encapsulated electronics.

Baumer Ltd.    Southington, CT 06489 1534
Mar 05, 2012 Able to detect media levels in tanks, vessels, and pipes, LBFS level switch features sensitivity over measuring range for dielectric constants from 1.5 to 100+ that enables limit detection with all types of powders, granulates, and liquids. Response time of 0.2 sec promotes accelerated fill level detection as well as fill level accuracy and compliance. Featuring sensor head resistant to media adhesion, product is insensitive to flow, turbulence, bubbles or foaming, and suspended solids.

Siemens Building Technologies, Inc.    Buffalo Grove, IL 60089
Mar 02, 2012 Cerberus(TM) PRO and Desigo(TM) fire system panels and smoke detectors feature components that may be adapted to meet new conditions. Integrated in both systems, ASAtechnology(TM) is immune to deceptive phenomena and fosters early fire detection. Control panels are networkable, and up to 16 panels can be connected using peer-to-peer networking. Other features include integrated degrade mode, application-specific detection profiles, dual optical sensors, and independent CO detection.

Mark-10 Corp.    Copiague, NY 11726
Mar 02, 2012 Applying up to 200 lbf, Model WT3-200 measures pull-off force of wire and tube terminations. Backlit graphic LCD displays real-time force, peak force, and programmable pass/fail limits. Data can be transferred to PC or other data collector via USB, RS-232, Mitutoyo, or analog outputs. Able to store 1,000 readings and calculate statistics, tester includes break detection feature that can be configured to automatically output data, store data, and zero display upon sample break.

Measurement Specialties, Inc.    Hampton, VA 23666
Mar 02, 2012 Operating from -40 to +125°C, Model M7100 provides 0.25% accuracy and is suited for HVAC/R refrigeration controls, off-road vehicle engine control, compressors, and hydraulics. Pressure cavity is machined from solid piece of 17-4 PH stainless steel so no o-rings or organics are present that could be exposed to pressure media. Featuring 0.5-4.5 Vdc ratio metric output, transducer provides overvoltage protection to 16 Vdc for both positive and reverse polarity.

Newson Gale, Inc.    Lakewood, NJ 08701
Mar 01, 2012 Comprising enclosed intrinsically safe power supply and electronic monitor, Earth-Rite® continuously verifies existence of low-resistance path between FIBC's static dissipative or conductive fibers and known grounding point, typically through mechanical grounding clamp affixed to tab. System protects against uncontrolled static discharge in variety of hazardous atmospheres, including combustible gas/dust. As long as safe conditions are confirmed, Earth-Rite displays pulsing green multi-LED.

Renco Electronics, Inc.    Rockledge, FL 32955
Mar 01, 2012 Featuring encapsulated design and 3,750 V Hi-pot, Model RL-9740 is suited for use in industrial monitoring controls and switch mode power supply applications. Thru-Hole Current Transformer meets all IEC950 insulation and VDE requirements. Housed in 19 mm high package with 4 PCB pins, device operates from -40 to +130°C.

Advanced Instruments, Inc.    Norwood, MA 02062
Mar 01, 2012 Suited for cow, goat, sheep, and buffalo milk, CombiScope(TM) FTIR 600 comprises LactoScope(TM) FTIR 600, for measuring chemical composition, and SomaScope(TM) LFC 600, for counting somatic cells in raw milk, both at speeds of 600 samples/hr. Electro-magnetic sampling system, operating without friction and wear, uses IR and acoustic sensors to monitor sample temperature, condition, and volume without touching milk. Direct Temperature Control of cell eradicates effects of sample temperature variation.