SICK, Inc.
Minneapolis, MN 55438
Jun 23, 2006 Suited for assembly and picking applications, Pick2Light bin control system offers hand detection and 360°-viewable job LED. Single-sided, retro-reflective light grid features t-slot frame mounting feature. Without restricting bin size, external mounting configuration minimizes damage caused by workers when removing parts or inserting bins. Features include metal housing, 2 m max range, and 5 available sensor heights from 120-420 mm.

SICK, Inc.
Minneapolis, MN 55438
May 17, 2006 As safeguarding solution for point of entry applications, M4000 Advanced provides access protection to various machine applications. Product uses corner mirrors to protect up to 4-sided applications and does not require PC. When used with UE403 Muting Module, product offers solution for decentralized conventional muting applications involving automatic material transport. Integrated LED status indicator mounted on end cap is visible from any direction.

Blue Water Mfg.
Chanhassen, MN 55317
May 02, 2006 As component in SafetyRail 2000 Guardrail System, Perma-Line eliminates need to perform monthly inspection and replacement of torn and worn out plastic flagging. Product exceeds OSHA regulations and features self-supporting, no drill installation. Setup requires users to slide 39 in. high stanchions into base and string warning line cable with galvanized metal flags through stanchion connection. System remains in place without piercing or penetrating roof.

Geisler, J. L. Corp.
Warren, MI 48092
Apr 12, 2006 Setting up in seconds, free-standing YellowJacket Devices provide effective way to route traffic inside and outside plant, and can also be used to mark temporary machine or construction sites. Each one folds flat to 4.5 in. thick. Ball/detent design snaps units into place, while flat surfaces and several reflective points make devices highly visible.

Cubic Designs Inc.
New Berlin, WI 53151
Apr 12, 2006 Featuring triangulated, wrap-around design with all-steel construction, Cubic RackGuards protect rack uprights by deflecting and absorbing impacts from moving in-plant vehicles. Factory welded base plates bolt directly to facility floor, and products come in 12 and 24 in. heights. They are available for installation around rack uprights with standard or seismic footplates and are protected with powder coat finish available in 14 colors.

Rite-Hite Aftermarket Corp.
Milwaukee, WI 53223
Mar 31, 2006 Constructed from extruded PVC, Safety Gate EX3 has gas-shock counterbalance system to help keep it in raised vertical position or closed horizontal position. Manual barrier system is available for openings 5-10 ft wide. Standard unit includes two 43 in. high x 5 in. diameter steel posts, two 7 in. high PVC rails with safety striping, and anchoring hardware. Rails provide high visibility barrier while absorbing 200 lb of force from any direction.

Omega Industrial Products Inc.
Saukville, WI 53080
Mar 23, 2006 Engineered to protect people and equipment from accidents caused by in-plant vehicles, Omega Barriers feature modular construction and adapt to most applications. Design, able to withstand impact of 10,000 lb forklift moving at 4 mph, distributes energy from impact over entire system for total protection. OSHA-approved, safety yellow products have pre-punched structural mounting posts and come in single- or double-rail heights that can be mixed and matched.

Banner Engineering Corp.
Minneapolis, MN 55441
Jan 27, 2006 Featuring nickel-plated housings and end caps with dissipative lens assemblies, optical ESD-safe EZ-SCREENS® provide non-contact machine guarding. Models with 14 mm resolution provide finger, hand, and ankle detection with range of 0.1-6 m, while 30 mm models provide hand and ankle detection with range of 0.1-18 m. Receiver DIP switch selector is provided for scan code, trip or latch output, and EDM. Visual diagnostics facilitate setup, operation, and maintenance.

Richco, Inc.
Morton Grove, IL 60680
Jan 19, 2006 Acting as barrier to foreign objects, Models RCOFM-25 and RCOFM-50 protect and optimize performance of 25 and 50 mm mounted fans, respectively. Units are molded in electroplated steel wire with nickel chrome finish and are RoHS compliant. Screw-mount assembly mounts guard to fan casing.

Kee Safety, Inc. (formerly Kee Industrial Products, Inc.)
Buffalo, NY 14206-2665
Jan 19, 2006 Kwik Kit® safety barrier system, used around areas where personnel access should be restricted due to safety concerns, complies with OSHA and BOCA standards. Requiring hex key to tighten set screws to assemble unit, product is put together by placing supplied horizontal rails through pipe fittings on pre-assembled uprights. Pipe fittings are supplied as Kee Klamp® malleable cast-iron or Kee Lite® aluminum, and 1.9 in. OD pipe is powder-coated in safety yellow finish.

Banner Engineering Corp.
Minneapolis, MN 55441
Jan 16, 2006 In addition to dissipative lens assemblies, ESD-safe EZ-SCREEN® optical safety light screen systems have nickel-plated housings and end caps. They provide non-contact machine guarding for finger, hand, and ankle detection with 0.1-6 m range for 14 mm resolution models and 0.1-18 m range for 30 mm models. Self-contained emitter/receiver pairs do not require separate control box, and each receiver has selectable trip or latch output.

Omron Electronics LLC
Schaumburg, IL 60173
Jan 13, 2006 Along with blanking function that disables detection for beams that are constantly blocked, F3SJ-A Ver.2 provides muting function that temporarily disables light curtain when item passes through its detection zone. Muting function incorporates position detection capability, enabling safety protection even when operator has to install workpiece on equipment. Other functions include partial muting and ability to divide light curtain detection zone into stop and warning areas.

Blue Giant Equipment Corp.
Brampton, ON L6W 3K2  Canada
Jan 02, 2006 Designed to prevent forklift roll-off and overhead door damage, XDS EXTRA DOCK SAFETY SERIES protects loading dock employees from dangers of drop-zone when door is open and no truck is present. Safety device features DOOR AND DOCK GUARD and acts as pallet stop to guard door panels and tracks from regular impact damage. Constructed to stop 10,000 lb rolling loads up to 4 mph, hydraulically activated safety guard is mounted 22 in. in from face of deck plate and rises 7.5 in. above deck.

ERICO, Inc.
Solon, OH 44139-2631
Nov 29, 2005 Suited for use in industrial environments prone to dangerous and damaging transients and surges, Universal Transient Barrier (UTB) protects equipment with 3-stage clamping circuit. CE-approved UTB covers line currents up to 1.5 A and frequencies up to 3 MHz. Product, intended for use with Transient Discriminating Filters (TDFs), provides coordinated approach to protection of power and data control circuits.

SICK, Inc.
Minneapolis, MN 55438
Oct 20, 2005 With beam spacing of 300, 400, 450, 500, and 600 mm, multiple light beam safety device, Model M4000, offers mounting flexibility via 3-groove housing and swivel mount end caps. Corner mirrors enable unit to protect up to 4-sided applications, such as entire robot cell. Integrated LED status indicator mounted on end cap is visible from any direction. Model M4000 requires no PC and can be directly linked to AS-Interface Safety-At-Work bus.

Schmersal Inc.
Tarrytown, NY 10591
Oct 03, 2005 Designed for use with Series AZ17...zrk and Series AZM170...zrk safety door interlock switches, Series B25 features Star-grip or T-grip handle that withdraws safety interlock switch actuator key from switch body, opening positive-break NC switch contacts. Actuator key is withdrawn into door handle housing, eliminating potential hazard of protruding key. Low-profile, ergonomically-designed door handle is suited for light to medium-weight machine guards in variety of applications.

Banner Engineering Corp.
Minneapolis, MN 55440
Aug 12, 2005 Non-contact fiber optic PICO-GUARD™ Points enable multiple emitter and receiver points to be arranged to create customized optical safety grid that meets Safety Category 4 requirements. Resistant to damage from moisture and debris, IP67-rated products operate with light and use no electricity. Safety elements with 12 mm polycarbonate threaded barrel have operating range of 1.5–6.4 m, whereas 30 mm stainless steel threaded barrel models operate over 8.5–28.7 m range.

Blue Water Mfg.
Chanhassen, MN 55317
Aug 02, 2005 Exceeding OSHA (Standards-29 CFR) 1926.501 and 1926.502, portable StealthRail folds down onto roof surface to provide clean sightlines. It features self-supporting, no-drill installation and detent pin - attached to each pivot assembly - that allows for lowering, raising, and locking of guard rail. Lengths of 3, 3½, 4, 5, 7½, and 10 ft are finished with UV yellow powder coat that withstands various weather conditions in construction environments.

Scientific Technologies Inc.
Fremont, CA 94555
May 31, 2005 Equipped with power supply and removable terminal blocks, RM-2AC serves as central point for terminating all signals to and from solid-state safety device. It converts solid-state outputs to force-guided relay outputs. One NO and one NO/NC safety relay output rated at 250 Vac, 6 A can be used as primary switching device or to switch contactor. With 100–240 Vac input, module can monitor switching function of final switching device through MPCE monitoring circuit.

ASN Safety Solutions
4 Rockaway, NJ 07866
May 10, 2005 Available in various lengths and extrusion types, GE-Series is suited for material handling applications where equipment and personnel need to be protected. Along with sealed end caps that protect against elements, construction incorporates 2 conductive switching surfaces on inside of rubber extrusion to protect against damage. Protective devices also employ aluminum C profile that secures extrusion and acts as mounting rail.