Safety & Security Equipment

Safety & Security Equipment

Wrap insulates vessels and pipes.

December 4, 2001

CrimpWrap(TM) Crimped Pipe and Tank Wrap helps control heat loss or gain, and provides hot-surface personnel protection during system operation. Featuring service temperatures from 35 to 850° F, it is made from continuous fiber glass blanket, eliminating strip delamination potentiality. Wrap is available as foil-faced or with white-faced kraft vapor retarder facing in 1 to 4-in. thicknesses. Read More

Safety & Security Equipment

Studded Footwear reduces slips and falls on ice.

December 3, 2001

Icegrips have 36 aggressive hex-head screws that bite into ice and snow conditions to provide maximum traction, and angled-groove tread to prevent contaminant buildup. They fit over work shoes and boots and fasten with hooks and loops. Screws are easily replaceable when they wear out so that footwear can last through several winter seasons. Grips are industrial black, have 2 in. clean arch area,... Read More

Safety & Security Equipment

Eye Wash overcomes blinking reflex.

November 17, 2001

Vista Eyeshower® system consists of sterile plastic applicator and 1 oz bottle of sterile buffered eye wash solution. Applicator fits securely around eye socket as user looks directly into mirror at end of applicator, keeping vision focused with eyelid open as wash stream is delivered from bottom of applicator. User does not blink because wash stream cannot be seen as it approaches eye. Read More

Safety & Security Equipment

Faceshield with Chin Protector reduces overhead glare.

November 15, 2001

Clear window and chin protector combination is designed for protection against flying debris, sparks and liquid splash. Made of clear, 0.040 in. thick, impact and scratch-resistant polycarbonate, window and chin protector provides full crown-to-chin protection, allows room for protective eyewear to be worn underneath, and provides workers with more than 180° of eye and face protection while... Read More

Safety & Security Equipment

Mailroom Safety Equipment protects against biohazards.

November 15, 2001

Using "glove box" technology, suspect mail is placed into airtight box with viewable panels. Once secured, mail is opened with air-tight nitrile gloves under high-intensity UV biohazard-killer germicidal light. If any powder or other suspect substance is found, CSV-1 sterilizing spray is used to kill potential contaminant. Unit weighs 20 lb, is portable, and can be used in vehicles. It runs on... Read More

Mounting & Attaching Products, Safety & Security Equipment

Rack Guards are equipped with rubber bumpers.

November 14, 2001

Stuructural Rack Guards with rubber bumpers protect against damage to pallet racks, wall corners, fork trucks and pallet trucks. Constructed of 6 in. C channel with yellow powder-coat paint finish, rack guards are available from 12 in. to 24 in. high with a 4-1/2 in. opening size. Extruded rubber bumper fits on front of structural rack guard. Mounting hardware is available. Read More

Adhesives & Sealants, Safety & Security Equipment

Foam Tapes are designed for use in high temperatures.

November 9, 2001

Duofoam® VJ Series polyethylene foam tapes are double coated with pressure sensitive acrylic adhesive providing excellent long-term aging, resistance to environmental extremes, and performance over a range of operating temperatures. Foam does not absorb water and provides good thermal insulation properties. Tapes are available in black and white, and are conformable to irregular surfaces. Read More

Safety & Security Equipment, Welding Equipment & Supplies

Auto Darkening Filter has 3 operation shadings.

November 9, 2001

NexGen EQC auto-darkening filter uses digital and analog controls with an LCD display telling mode of operation, welding shade and sensitivity adjustment. All controls are protected from interior helmet work environments. Its lens utilizes four-sensor design, and gives steady filtering protection without flickering down to low welds of less than 5 A. NexGen allows users to work in variable shade... Read More

Safety & Security Equipment

Hardhats meet ANSI Z89.1 Class E standards.

November 8, 2001

Head-Turners(TM) hardhats are offered in 2 designs which withstand temperature variances, humidity and exposure to UV light for long-lasting wear. NightVision(TM) design is fully reflective for added protection in low light environments and is ideal for nighttime road construction. Both American Flag and NightVision have 4-point ratchet suspension fitting head sizes 6-1/2 to 8. Hats are fully... Read More

Safety & Security Equipment

Alarm Software displays images.

November 8, 2001

Version 7.1 Alarm Verification software displays archived photos of any person who arms or disarms burglar alarm system. This allows security guard to compare the stored photo and current video image side by side on the same video screen. The operator may select a detailed view of each picture and save pictures for use in a written report on the incident or included in e-mail to inform the... Read More

Safety & Security Equipment

Connector provides fall protection.

November 8, 2001

Miller(R) Cable Anchorage Connector attaches to I-beam or similar structure capable of withstanding 5,000 lb, and connects to captive-eye carabiner. Worker can attach shock-absorbing lanyard or self-retracting lifeline to O-ring connector. One model is designed with captive-eye carabiner while second model provides locking snap hook. Both feature 1/4 in. vinyl-coated wire rope and forged steel 3... Read More

Material Handling & Storage, Portable Tools, Safety & Security Equipment

Tool Lanyards comply with OSHA guidelines.

November 8, 2001

Miller® Bandit(TM) Tool Holder and Miller WristBandit Tool Holder prevent workers from dropping tools at heights. Miller Bandit Lanyard Tool Holder attaches to workers' waist belts while allowing freedom of movement. It is constructed of stretchable cord surrounded by nylon tubular webbing, and stretches from 26 to 43 in. Miller WristBandit Tool Holder attaches to workers' wrists using Velcro.... Read More

Safety & Security Equipment

Anchorage Connectors provide temporary fall protection.

November 8, 2001

Miller Disposable Concrete Anchor Straps create secure point of attachment in concrete construction. They feature 1-3/4 in. wide abrasion-resistant nylon webbing with 7,000 lb tensile strength. Models are available with steel D-ring or web loop with inner wear pad, both withstanding up to 5,000 lb. Standard lengths include 2 and 4 ft. Read More

Safety & Security Equipment

Gloves provide cool alternative for hand protection.

November 6, 2001

Nitri-Kote(TM) Gloves are fully coated and combine protection, abrasion resistance, and breathability. Blended knit shells are coated with outer layer of nitrile. Gloves are ambidextrous, and can be washed or dry-cleaned without damage. They can replace PVC-coated string knits, vinyl impregnated, leather palm and dip-coated nitrile gloves. Read More

Safety & Security Equipment

Welding Helmet protects worker from overhead hazards.

November 5, 2001

Speedglas ProTop combination hard hat, welding helmet and auto-darkening lens system is for welders working in areas with overhead hazards, such as cranes, protruding beams and moving machinery. Pivot mechanism connects welding helmet to hard hat. Low profile hard hat works well when entering space-restricted areas. Its short brim design means welding helmet and lens are closer to welder's face,... Read More