Metabo Corp.    West Chester, PA 19380 4243
Sep 17, 2009 Powered by 18 V, 2.6 Ah Li-Power Extreme battery, Model SB18 LTX weighs 5.5 lb and measures 9 5/16 in. long, with removable ½ in. chuck for use in tight spaces. Dual torque adjustment can be set to 13-31 lb-in. or 31-114 lb-in. In hammer drill mode, tool provides up to 28,000 impacts/min. Hammer drill/driver offers drilling capacity of ½ in. in mild steel and concrete and 2 in. in wood. It has no-load speed of 0-400 rpm in first gear and 0-1,400 rpm in second gear.

IRWIN Industrial Tool Company    Wilmington, OH 45177-0829
Sep 09, 2009 Performance Threading System(TM) incorporates Self-Aligning Taps, which align just by placing them in hole, and feature Chip Breaking Technology ensuring clean cuts when threading. System incorporates dies with alignment plate for precise threading on rod or stud; tap socket, which fits any 3/8 in. socket wrench or socket extension, and various drive tools. Tool cases have clear cases and are available in 1½ in. thick modular sets of SAE or Metric taps/dies and drive tools.

Milwaukee Electric Tool Corp.    Brookfield, WI 53005-2550
Sep 04, 2009 Operating on Lithium-Ion battery, Model 2410-22 M12 Cordless 3/8 in. Drill/Driver delivers 250 lb-in. torque, 0-1,500 rpm at high speed, and 0-400 rpm at low speed. Unit weighs 2.5 lb and is small enough to carry in tool belt throughout day. Tool is suited for applications in HVAC, MRO, and woodworking involving screw driving and small hole drilling.

Metabo Corp.    West Chester, PA 19380 4243
Aug 17, 2009 Equipped with ½ in. chuck that allows for drilling ½ in. in mild steel and 2 in. in wood, rugged BS18 LTX features dual range torque adjustment from either 13-31 or 31-114 lb-in. It has fast-charging 18 V, 2.6 AH Li-Power Extreme battery and offers no-load speed of 0-400 rpm in first gear and 0-1,400 rpm in second gear. Device has aluminum die cast gear housing and features technology that allows user to remove chuck and drive screws with ¼ in. hexagon recessed spindle.

TELCON Ltd. PCD Cutting Tools    Afula 18110  Israel
Jul 27, 2009 Specially designed for cutting highly abrasive materials, PCD Countersinks allow for accurate forming of holes. Units with interchangeable pilot enable replacement of damaged pilots or substitution of various pilot diameters. They come in body diameters from 3/8 to 1 ¼ in. For constant hole diameters, PCD Countersinks with integral pilot come in body diameters of 3/8 and ½ in. as well as 10, 12, 14, and 17 mm. Both types have countersink angle of 100/130°.

Milwaukee Electric Tool Corp.    Brookfield, WI 53005-2550
Jun 01, 2009 Featuring 4-pole frameless motor, M18 Cordless ½ in. hammer drill/driver delivers 550 in.-lb of peak torque with M18 XC high capacity Lithium-Ion battery, and 450 in.-lb of peak torque with M18 compact Lithium-Ion battery. It is suited for HVAC technician for duct fastening; commercial plumber as they run conduit or anchor pipe hangers; and professional electrician for running wire, secure conduit clamps, or drill through metal studs.

Hilti Inc.    Tulsa, OK 74121
Mar 03, 2009 Powered by Cordless Power Care lithium-ion technology, SFH 18-A CPC Hammer Drill/Driver and SF 18-A CPC Drill/Driver are suited for drilling holes in masonry, stone, wood, and metal with variety of bits, as well as driving screws and lag bolts. Tools feature all-metal gearing and offer speeds up to 2,140 rpm. Ultramide glass-fiber reinforced housing helps protect against drops, while electronic monitoring of battery cells protects against over-heating, overloading, and deep discharge.

Hitachi Power Tools    Norcross, GA 30093
Nov 18, 2008 Delivering 460 lb-in. torque, DS18DSAL Compact Pro Series drill features variable speed trigger with 0-350 and 0-1,500 rpm settings. Compact, 18 V tool is 7.7 in. long, weighs 3.5 lb, and includes clutch with 22 driving stages and one mode for drilling. Keyless ½ in. ratcheting metal chuck accepts wide variety of bits. Drill also features ergonomic handle, LED job light, and metal belt hook. External access to carbon brushes facilitates their replacement when worn.

DeWalt Industrial Tool Co.    Hampstead, MD 21074
Nov 05, 2008 Built to drill holes in wood using ship auger bits, hole saws, and self-feed bits, DWD460 offers variable speed settings of 0-300 and 0-1,300 rpm for matching application requirements. This ½ in. stud and joist drill also features mechanical, torque-limiting clutch as well as Bind-Up Control(TM) feature that senses stall conditions during use and adjusts motor torque to manageable level. Multi-position, adjustable bail handle and 2-position side handle lend to leverage and control.

DeWalt Industrial Tool Co.    Hampstead, MD 21074
Nov 03, 2008 At 5.2 lb, model DWD215G drill features midhandle grip as well as durable, all-metal keyless ratcheting chuck with automatic spindle lock for bit retention, while DWD210G, at 4.9 lb, offers pistol grip. Handles of both are equipped with antislip soft grip for comfort. Drills include 360° locking side handle and 3-wire cord set. Providing enough power for heavy-duty jobsite applications, each also operates at 0-1,200 rpm.

Sugino Corp.    Itasca, IL 60143
Oct 29, 2008 Utilizing 2 servo motors, which are synchronized for through-hole applications, SSM4 and SSM5 Drap Units are capable of high-speed drilling and tapping for class 3 thread production in single pass. Units are available with feed motors ranging from 2.8 lb-ft at 3,000 rpm to 15.85 lb-ft at 2,000 rpm, and spindle motors from 15.86-36.95 lb-ft at 2,000 rpm. Touchscreen control features conversational software that facilitates programming and active diagnostics.

Bosch Power Tools & Accessories    Mt. Prospect, IL 60056
Sep 04, 2008 Utilizing Litheon(TM) battery technology, Brute Tough(TM) 18 and 14.4 V cordless drill/drivers and hammer drill/drivers feature 25+1 clutch and tight-gripping ½ in. metal chuck. Unibody motor construction, all-metal gear train, and DuraShield housing lend to durability, while ergonomics promote grip and minimize fatigue. Offered in same voltages, Compact Tough(TM) cordless drill/drivers offer maneuverable performance via ergonomic design, 20-position clutch, and ½ in. single sleeve chuck.

Bosch Power Tools & Accessories    Mt. Prospect, IL 60056
Aug 14, 2008 Equipped with 3/8 in. 3-jawed chuck and 2-speed drivetrain that delivers 400-1,100 rpm, PS30 12V Max Litheon(TM) Drill/Driver enables drilling, drilling with spade bits, cutting with hole saws, socket fastening, and screwdriving. Tool weighs 2.4 lb and is small enough to reach into tight areas. In cramped quarters, built-in LED light offers visibility. Drill/driver comes with two 12 V Max Litheon batteries, 30-minute quick charger, and canvas carrying bag.

E.H. Wachs    Lincolnshire, IL 60069
Aug 07, 2008 Capable of drilling, boring, and tapping pipes of any diameter, Multi-Axial PowerDrill features 5 in. tool diameter and 5 axes of adjustment. Modular design facilitates setup, and optional mounting saddles allow unit to be used on pipes or flat surfaces. Field tool can utilize standard and reversible air motors in 1½ and 2½ hp sizes and works with range of standard tooling and tool adapters. Optional equipment includes 2-speed gearbox, pivot mount, digital level, and laser pointer.

Metabo Corp.    West Chester, PA 19380 4243
Aug 01, 2008 Suited for drilling large diameter holes into masonry materials as well as for heavy chiseling, KHE 96 SDS-Max allows users to move between masonry drilling and demolition applications without switching tools. With rotational torque of 1,062 lb-in. and variable impact energy of 1.0-27.0 J/blow, it offers optimum drilling range of 1-2 in. with solid bits and 6 in. using core bits. Unit measures 27¾ in., weighs 28 lb, and comes with carrying case.

Bosch Power Tools & Accessories    Mt. Prospect, IL 60056
Jul 29, 2008 Powered by 12 V Max Litheon(TM) battery, second-generation PS20 Pocket Driver combines ¼ in. magnetized locking bit holder, LED work light, ergonomic grip, and 10+1 clutch ring in tool weighing less than 2 lb. Driver is supplied with 2 batteries, 30-min quick charger, and canvas carrying bag.

Sandvik Coromant Co.    Fair Lawn, NJ 07410
Jul 16, 2008 Targeting oil, gas, and mechanical engineering industries, CoroThread 266 high-precision threading tool features iLock insert locking system that simplifies tool set-ups, eliminates potential insert movement during machining, and disperses cutting forces with no pressure points, reducing strain on both tool and insert. Unit has axial and radial E-tolerance of 0.0004 and 0.002 in., respectively, minimizing effects of changing cutting edges to ensure maximum product consistency.

Ideal Industries, Inc.    Sycamore, IL 60178
Jul 11, 2008 Suited for forming new screw threads, cleaning out obstructions, or retapping burred and stripped threads, IDEAL Triple Tap features Santoprene® textured handle that reduces risk of repetitive strain injuries and provides slip-resistant grip, even when wet, while resisting damaging oils, fluids, perspiration, and abrasions. Rugged and compact tool is available in 3 thread sizes including 6-32, 8-32, and 10-24 (part number 35-411), or 6-32, 8-32, and 10-32 (part number 35-412).

Emerson Electric Co.    St. Louis, MO 63136 8506
Jun 20, 2008 Though specifically designed for use on stainless steel, Model 35S Tubing Cutter cuts copper, steel, and aluminum tubing. It features ergonomic X-CEL knob and roller bearings that minimize friction while optimizing cutting speed. Constructed of hardened steel, Models 227S and 223S inner-outer reamers include integrated measurement tools. Model 227S features 45 cutting edges to allow for inner reaming and outer deburring or beveling of ½-2 in. tubing, while Model 223S has 36 cutting edges.

Hitachi Power Tools    Norcross, GA 30093
Jun 18, 2008 Weighing 2 lb and measuring 5½ in. in length, Model WH10DL utilizes 10.8 V Li-Ion battery to drill and drive into wood, metal, and concrete. Tool features quick change ¼ in. hex chuck and variable speed trigger. By partially depressing trigger, LED light illuminates work surface, allowing user to see clearly to set up application. Delivering steady stream of power throughout every charge, HXP batteries are equipped with current interrupt detection system and thermal protector.