Atlas Copco Compressors, Inc.
Westfield, MA 01085
Sep 14, 2009 Designed with noise and vibration damping, Model MB 750 guarantees sound power level of 118 dB(A). Extra long retainer bars provide maximum contact surface to tool and lower hammer, and can be used on both sides for extended service life. Breaker is optionally available with DustProtector(TM) II 2-stage wiper system, which minimizes penetration of abrasive dust into breaker.

Danaher Tool Group
Hanover, MD 21076
Jun 26, 2009 Featuring forged alloy head that is adjustable to 14 angles and rotates 180°, GearWrench pry bar extends from 24 to 48 in. and offers indexing flexibility in head and length. Pry bar has lightweight tubular design and provides increased access in applications where lifting and shifting are required. Product targets technicians and tool users in automotive, construction, industrial, and steel industries.

Dynabrade, Inc.
Clarence, NY 14031
May 28, 2009 Offered in 4 models, Dynascaler surface preparation tools power Roto Peen Bonded Flap Assemblies for removing rust, oxide, scale, old paint, and coatings. Straight Line and Right Angle models let operators work close to work surface and have 4-position top handle, while Floor model features 20-slot hub for Roto Peen Bonded Flaps and suits scaling operations along extended areas. Over-Under model mechanically fractures scale and coatings with negligible removal of base metal.

Danaher Corp.
Washington, DC 20037
Jul 16, 2008 Designed to improve access in tight applications, Indexing Pry Bars include head that can be adjusted to 14 different positions, offering more than 180° of angle. Pry bar of 8 in. size can function as seal pick for removing engine and axle drive seals, while 24 and 33 in. units have grooved bottom surface for added traction. Expandable version extends from 18-29 in., and features 14 position indexing head. Two-piece set is available that includes 8 and 16 in. fixed length pry bars.

EZEBREAK, LLC
Frankford, WV 24938
Jan 17, 2008 Using gas producing cartridges to generate pressures up to 75,000 psi, Micro-Blaster II cracks hard rock and concrete materials from within and does not require special license. Compact demolition system requires 5/16 x 10 in. hole in which to place cartridges. Triggered remotely by pulse of 100 psi air or CO₂, system can be configured to initiate up to 6 simultaneous shots. Fly rock is minimized, promoting worker safety and allowing use in any environment.

FSR Metal Products
West Paterson, NJ 07424
Jun 14, 2007 With 6 inputs and 2 outputs, Model MAS-6200 provides quality scaling and switching plus built-in keyer to allow computer-generated text to be superimposed upon video background. Unit includes automatic incoming resolution detection and computer resolutions to 2,048 x 2,048, making it suited for boardroom and house of worship presentation systems. If audio is required, Model MAS-6200A has built-in 4 x 1 stereo audio switcher.

Blancett Flow Meters
Racine, WI 53406
Jan 30, 2007 Offered in gallons, K-factor Scaler converts or scales turbine meter output into desired units of measurement and is recognized by almost any data collection device. Switch-selectable version has set of 8 rotary switches within enclosure, while programmable version comes precalibrated from factory when ordered with Series 1100 turbine meter.

DeWalt Industrial Tool Co.
Hampstead, MD 21074
Jan 03, 2007 Electric concrete breaker, D25980K, employs metal, automotive-style seals on ram and piston to prevent dust and debris from entering unit and extend product life. Hammer mechanism delivers 61 lb-ft of impact energy, and SHOCKS - Active Vibration Control combines shock-mounted, rubber-coated handles with counter balance mechanism located in tool's barrel to reduce vibration to 6.6 m/sec². Additional features include soft-start system and electronic control system.

Cooper Power Tools
Lexington, SC 29071
May 05, 2006 Master Power® Model MP5187 scrapes away foreign substances, providing clean and smooth working surface. Measuring less than 9 in. and weighing 2.5 lb, unit minimizes operator fatigue. It includes twelve 3 mm heat-treated needles enclosed in round housing unit, allowing for max performance of 12,000 bpm. Scaler enables users to work within corners and tight spaces, and can optionally be converted to chisel scaler.

Flo-tech, Div. of Racine Federated Inc.
Racine, WI 53404-7017
Aug 08, 2005 PC-programmable F5140 K-Factor Scaler acts as field-adjustable frequency divider, converting pulsed frequency output from turbine flow meter to scaled, square wave output. It provides interface for PLC, RTU, PC DAQ cards, or any frequency counter or data input device. With optional software, unit also converts turbine meter output into frequency for other units of measurement. Interface includes on-board microcontroller and internal or external pull-up resistor.

Clearwater Enviro Technologies, Inc.
Clearwater, FL 33765-2113
Mar 14, 2005 UL-listed ScaleBlaster handles standard diameters of non-ferrous pipe from 12–40 in. and ferrous pipe from 4–26 in. Microprocessor sends out square-wave current that sweeps range of frequencies. Carried by signal coils, current induces a dynamic electromagnetic field perpendicular to water stream that forces calcium carbonate to come out of solution as soft, nonadhesive, submicron particles that remain suspended in water and flow harmlessly through system.

Clearwater Enviro Technologies, Inc.
Clearwater, FL 33765-2113
Nov 11, 2004 Offered in industrial-size models, ScaleBlasters handle standard diameters of non-steel pipe from 12–40 in. and of steel pipe from 4–26 in. Signal coils transmit modulating square-wave frequency through pipe wall to moving water stream inside. Controlled by integrated circuitry, complex waveforms cause calcium and magnesium carbonates to lose adhesive, limescale-forming properties. As a result, new scale does not form and existing scale wears away.

Paul Wever Construction Equipment Co., Inc.
Goodfield, IL 61742-0085
Feb 03, 2004 Mine Scaler Conversion package, available with 2 boom arrangements and Custom Conversions, is suited for unique scaling needs. Able to be integrated on new-wheeled excavator or pre-owned model, unit features hydraulically rising cab that tilts forward and backward. Users choose which tool to use: pick, hammer, or grinder. Unit has load shock system on hydraulics, separate tank and cooler circuit to run tools, and lighting package for night work.

Loegering Manufacturing Inc.
Casselton, ND 58012
Jul 23, 2003 Breakers range in weight from 430–1,100 lb. Smallest model has tool energy rating of 70.11 lb-ft/blow, while largest breaker has rating of 468.63 lb-ft/blow. Valve system uses less oil flow to do same job as higher flow breakers. Air check valve system allows units to be submerged in water while working. Shorter size increases operator visibility in small tight areas.

T.C. Service Co.
Willoughby, OH 44094
Nov 20, 2002 TOP CAT® LV-1 Scaler and LV-1N Needle Scaler, for metal-removal applications, deliver 4,000 blows per minute at standard working pressure of 90 psi. Designed to meet ISO and OSHA standards for tool vibration, they offer ¼ in. NPT air inlets. Cases and internal parts are heat treated. Needle scaler offers hardened alloy steel needles, which are available in 5 or 7 in. round and rectangular shapes. They are suited for metalworking and welding applications.

Trelawny Pneumatic Tools
Malvern, PA 19355
Oct 04, 2002 Breaker, with 5 ft handle, removes ceramic tile, thin set mortars, and other difficult materials. Lower grip on handle can be adjusted to comfortable position. Breaker features 2 in. stroke combined with 2 in. bore for difficult scraping and chipping applications. Air consumption is 20 scfm @ 90 psi. Chisels are available in 1, 2, and 3 in. wide sizes. Single-ball retainer provides quick tool change and positive, safe lock.

Trelawny Pneumatic Tools
Malvern, PA 19355
Jul 08, 2002 Long reach Python removes tile, carpet, glues, resins, and other similar materials. Ergonomic design provides optimum angle of approach to floor surfaces and eases back strain. Vibration isolated handle further adds to operator comfort. It can be equipped with 1, 2, or 4 in. chisels or 4, 8, or 12 in. scrapers. Single ball retainer provides quick attachment change and positive locking of tool. It consumes 8 scfm @ 90 psi.

Allmand Bros Inc.
Holdrege, NE 68949
May 31, 2002 EZ 650 and EZ 1100, with Honda gasoline engines and adjustable drop heights, break up to 8 and 12 in. thick concrete, respectively. At maximum drop height of 30 in., units deliver approximately 30 strokes/min. For jobs requiring less force, adjustable stroke setting allows operators to increase speed. EZ 650 has 11 hp engine and 640 lb breaking weight; EZ 1100 has 13 hp engine and 1,080 lb breaking weight. Engine options include propane, diesel, and electric.

Communications Specialties, Inc.
Hauppauge, NY 11788
Feb 27, 2002 Deuce® SDQ automatically selects most effective motion compensation method based upon source material being scaled (adaptive frame using 3:2 pulldown, vertical temporal or static mesh). It accepts composite, S-Video and Y-CB-CR component input in NTSC or PAL standards. Output resolutions include 800x600, 1024x768, 1280x1024, line double and line quadruple. Unit includes non-volatile memory, RS-232 remote control and universal input power supply.