Portola Packaging, Inc.    Clifton Park, NY 12065
Apr 16, 2012 Intended for extended shelf life (ESL) and aseptic beverage packages, Steri-Shield(TM) 38 mm tamper-evident linerless plug closure is compression molded using HDPE. Design provides brand owners with unique aesthetic profile, and lightweight closure can withstand aseptic sterilization environment of up to 140°F as well as rigors of distribution. Able to be made in various sizes from 38-43 mm, product is also available without tamper-evident band.

Bericap North America    Burlington, ON L7L6C5
Mar 15, 2012 Designed to virtually eliminate finish distortion in hot fill applications, DoubleSeal(TM) Caps provide tamper evidence and anti-sabotage protection, whereby band breaks before seal is broken. Units feature 2-in-1 outer plus inner seal in single, liner-less cap that delivers lateral, opposing force pressure from both outside and inside, effectively supporting instead of distorting neck. Unlike 2-piece closures that break at 20% rotation point, DoubleSeal HDPE caps break in excess of 120%.

Portola Packaging, Inc.    Clifton Park, NY 12065
Mar 17, 2011 Compression molded using proprietary resin blend that includes high-density polyethylene, Steri-Shield(TM) can withstand aseptic sterilization environment up to 140°F without failing. Plug closure can be made in variety of sizes ranging from 38-43 mm, with or without tamper-evident band. Cap is suited for range of aseptically filled beverages, including juices, isotonics, dairy, energy drinks, milk, vitamin waters, drinkable yogurt, and teas.

Sensirion Inc.    Westlake Village, CA 91361
Oct 05, 2010 Made of PBT and equipped with filter membrane, SF2 filter cap protects SHT21/SHT25 humidity and temperature sensors from water, dust, dirt, and other contaminants. Cap fits exact external dimensions of SHT2x sensors and features filtration efficiency of 99.99% for all particles greater than 0.1 µm. Mountable after reflow soldering, cap is fixed by plugging 4 pins into holes in PCB. Product may also be used as adaptor for mounting humidity sensor directly into wall of housing.

O-Z/Gedney    Rosemont, IL 60018
Aug 26, 2010 Designed to fit all Form 7-style conduit body configurations in sizes from ½-4 in., Clip-On(TM) Form-IN-Place Covers feature integral gasket that prevents wiring from being exposed to moisture and solvents. Units also facilitate overall conduit system installation by eliminating need to align, assemble, and install separate gasket in every conduit body. Made from stamped steel with zinc pre-galvanized finish, covers are corrosion- and weather-resistant.

Alliance Plastics    Erie, PA 16510
Aug 04, 2010 Vented pipe caps as well as pipe and conduit open end pipe caps protect non-threaded and threaded NPT pipe ends as well as rigid metal and intermediate metal conduit. Manufactured from LDPE and MDPE, standard pipe caps protect pipe ends from damage and debris. Vented holes stop pressure build-up that would force caps off during storage/shipment. Available in 1/8-64 in. sizes to accommodate popular pipe sizes, caps offer push-on application to facilitate tool-free installation/removal.

EGS ELECTRICAL GROUP ? APPLETON    Rosemont, IL 60018
Jul 07, 2010 With integral gasket, Form-IN-Place(TM) Covers eliminate need to align, assemble, and install traditional removable gaskets. Appleton® units are designed for use with FM7, FM8, and FM9 conduit bodies, and are interchangeable with similar Crouse Hinds® conduit bodies, while O-Z/Gedney® covers are designed for Form 7 conduit bodies. Available to fit hub sizes from ½-4 in., all covers are rated NEMA 3R, UL Listed, and CSA approved for use in wet locations.

Binder-USA, LP    Camarillo, CA 93012
Jan 19, 2010 Designed for use with Series 430 push-pull connectors, protective caps provide IP67-rated environmental protection from liquids and debris while connector is detached from its mating connector. Each cap is made of brass and fits securely to push-pull connector or receptacle, and attaches to cable or panel via polyurethane rubber strap. Protective caps are available for male and female field-attachable connectors and panel-mount receptacles.

Binder-USA, LP    Camarillo, CA 93012
Jan 15, 2010 Designed for use with Series 718 M8 panel connectors, Protective Caps provide IP67-rated environmental protection from liquids and debris for un-mated panel-mount sockets. Each protective cap attaches directly to panel-mounted connector through loop, eliminating need for screws. Protective caps are available for both male and female connectors.

Alliance Plastics    Erie, PA 16510
May 11, 2009 Black dip molded vinyl caps, typically used to protect threaded or non-threaded tubing, rods, pipes, and fittings, are made from material flexible enough to stretch over larger dimensions without tearing, splitting, or shredding. Glossy finish lends to use as decorative end cap, and sizing starts as small as 0.078-8 in. in ½, 1, and 1½ in. lengths, with and without pull tab.

Innovative Molding    Sebastopol, CA 95472
May 06, 2009 Stacked into logs, top stack and TaperStack(TM) closures protect shape during shipping and warehousing. TaperStack design also minimizes gram weight of closure while maintaining optimal structural integrity. Stacking of smooth closures into cases typically allows for an increase of 40%-60% per case/pallet. While TaperStack closures have stacking shelf inside skirt of closure that enables caps to nest together, top stack closures feature ledge on top of closure for stacking.

Martin Engineering    Neponset, IL 61345 9766
Apr 21, 2009 Made from accumulation-resistant molded polyurethane, MARTIN® Dust Caps are pyramids that cause material to fall away from conveyor foot, allowing user to collect dust and clean it by washing down or sweeping around conveyor. Caps prevent buildup of fugitive material, fire hazards, and corrosion and weakening of conveyor structure. Available in 3 and 4 in. sizes to fit structural steel angles, caps are safety orange in color, for visibility.

Alliance Plastics    Erie, PA 16510
Apr 02, 2009 High-temperature PVC vinyl masking caps offer chemical resistance and heat resistance up to 425ºF. They are available in 0.078-8 in. dia sizes and in multiple lengths for each diameter, with choice of rounded top or easy pull tab. Vinyl caps in black material are also available. Caps can be kept on for product protection during shipping.

ITT Interconnect Solutions    Santa Ana, CA 92705
Jan 05, 2009 Designed for use in extreme weather conditions, PT connector caps are ribbed and feature arctic coupling nut to provide good grip when used with gloved hands and also feature ¼-turn locking with audible click. Caps are available in sizes 8-18 along with numerous cord lengths and fixing rings. Sizes 20-24 are also available upon request. Finishes include olive green cadmium and black/green zinc cobalt.

Ark-Plas Products, Inc.    Flippin, AR 72634
Dec 03, 2008 Available in 6 standard colors and 3 sizes (4-6, 8-10, and 1/4-20), Marbleized Pop On Screw Covers (POSC) feature swirl of dark and light colors in gloss finish. They are offered with pan or countersunk style bases and can be used with variety of fasteners, including standard screws, metric screws, nails, wood screws, self-tapping screws, rivets, and drive screws. Installation requires user to insert fastener through screw base and pop-on screw cover.

Bio-Chem Fluidics    Boonton, NJ 07005
Nov 21, 2008 Suited for laboratories, Omnifit® T-Series bottle caps and accessories feature PTFE inner portion for chemical compatibility. Units have anti-twist design that allows inner body of cap to spin freely, and prevent tubes from becoming twisted when cap is fitted or removed. This eliminates need to disconnect fluid lines before unscrewing cap. They require no fittings, and standard 1/8 in. laboratory tubing is pushed through luer ports on top of cap.

Rino Industries Ltd.    Chesterfield S41 9RN  United Kingdom
Jul 10, 2008 Hexagon cover caps start at size M5 and increase to M16 with socket head version available from M5 to M20. Black polyethylene hexagon cover caps are protect hexagon bolts and nuts from foreign inclusions and grey polyethylene socket heads protect hexagonal holes of cap screws.

Caplugs    Buffalo, NY 14207
Jul 03, 2008 Used as protective cover for wide variety of fittings, pipe ends, or threaded connectors, tethered vinyl cap features tethered end that allows cap to hang freely from application when not in use. It features high gloss finish with smooth, contoured ends and smooth flat top. Cap does not tear when stretched, rip when slipped over sharp edges, or shred when forced over threaded fittings.

Fibox Enclosures    Glen Burnie, MD 21061
Mar 12, 2008 Available in 5 sizes ranging from 6 x 6 x 4 in. up to 14 x 12 x 7 in., ARCA enclosures are UL Listed, with larger sizes having NEMA ratings Type 4, 4X, 12, and 13. Sizes 12 x 10 in. and smaller are also rated NEMA Type 6 and 6P. Transparent screw and hinged covers offer overlapping design to protect formed-in-place polyurethane gasket. Mounting plates plus fixed and hinged inner panels are available in metal/non-metallic versions.

Polymer Molding, Inc.    Erie, PA 16502-2115
Mar 12, 2008 Suited for automated feed systems, CAT Series Caps offers product protection with flexibility to remove and replace cap as needed. Units are molded in low-density polyethylene with LDPE service temperature of 150°F. Designed to protect products with or without O-rings, caps are natural in color and available for standard, NPT, and metric thread protection.