Tyco Electronics Corp.
Harrisburg, PA 17105-3608
Oct 23, 2009 Designed for low profile, SC cutout adapter, shuttered duplex LC adapters include slip-on retractable cover within standard cutout for enhanced eye protection. Single door design allows for one-handed connector installation, and other available product offerings include flanged and flangeless plastic configuration, secure adapters, and metal flanged adapter styles. Product serves data communication and telecommunication industries.

Discovery Semiconductors Inc.
Ewing, NJ 08628
Oct 16, 2009 Operating in 1,310 Nm wavelength band, Quad Photoreceiver Arrays are designed for 10 and 40 km transmission over single-mode fiber conforming to 100 Gigabit Ethernet standard (100GBASE-LR4 and 100GBASE-ER4). Arrays consist of 4 monolithically integrated InGaAs photodiodes on InP substrate and 4 transimpedance amplifiers (TIAs) to produce 4-channel electrical output signal, each channel running up to 28 Gbps. Power consumption is typically 200 mW per channel.

Belden
Richmond, IN 47375
Oct 13, 2009 Suited for use in outdoor broadcasting applications, MaxiBend cables are offered in 8 standard variants in single- and multi-mode constructions, with up to 12 fibers, and variety of special options including glass type, fiber count, and jacket color and material. Tight buffered cables feature aramid yarn strength member and sunlight-resistant polyurethane outer jacket. Resistant to abrasion, crushing, and cut-through, cables are compatible with all optical fiber connector types.

Draka Communications
Claremont, NC 08610
Oct 09, 2009 GR-20 and RUS standards compliant, ezInterconnect(TM) MDU Drop cables are offered with 3 different levels of bend insensitive fiber including BendBright, BendBright-XS, and BendBright-Elite. Drop cable is available from 1-12 fibers, gel or dry tube, is round in shape, armored, bends in any direction, and contains single tube. Offered with indoor or outdoor style connectors and with HLC Scratchguard technology, cables can be used for aerial, duct, or direct buried applications.

Emerson Process Management, Rosemount Div.
Chanhassen, MN 55317
Sep 25, 2009 Compatible with 2- and 4-electrode sensors, Model 6081-C suits conductivity applications too difficult to reach or too dangerous to access via wired transmitter. It functions in self-organizing network, in which every wireless device in network acts as router for nearby devices to ensure optimal data transmission reliability and network availability. Analytical field instrument offers measurement span of 0-600,000 µs/cm as well as diagnostics and intelligent power management.

GAO FiberOptics Inc.
Toronto   Canada
Sep 17, 2009 Designed to convert 1000Base-T signals to 1000Base-X fiber signals and vice versa, SFP (Mini-GBIC) Ethernet media converter extends connection distance between 2 Gigabit Ethernet devices via fiber cable without performance degradation. It conforms to IEEE802.3z standard and supports both full- and half-duplex modes with data transmission rates of 2,000 and 1,000 Mbps, respectively. Backward compatible with 10M, 100M, and 10/100M equipment, unit supports multi- and single-mode fibers.

Total Cable Solutions
Fremont, CA 94538
Sep 04, 2009 Single-mode macrobend/high-bend-radius patch cables utilize bend-insensitive Corning® SMF28e® XB full-spectrum, single-mode fiber that is compliant with ITU-TG.652.D and G.657.A standards. Cables are available with LC, SC, ST, or FC termination; APC or UPC polishes; and jacket thicknesses of 2 or 3 mm. Product has minimum bend radius of only 10 mm and is designed to be used in all network installs, and fits the FTTH market well.

Crestron Electronics, Inc.
Rockleigh, NJ 07647
Aug 05, 2009 Allowing HDMI device to be added in analog room, HD-TX1-F and HD-RX1-F units extend uncompressed HDMI and IR/RS-232 control signals up to 1,000 ft over single multimode fiber connection. They can also connect 2 HDMI switchers in different parts of building so source or display device can be located remotely from central equipment. Pairs include universal IR repeaters with range of up to 192 kHz, bidirectional RS-232 extenders up to 115k Baud, and 12 Vdc power pack.

Fiberguide Industries, Inc.
Stirling, NJ 07980
Jul 24, 2009 Using modified core preform that protects fiber from damaging effects of deep UV, Solarization Resistant Fibers can handle spectroscopy, lithography, and excimer laser delivery applications where fibers are exposed to deuterium lamp transmission (190-230 Nm) or ArF-Excimer (193 Nm) laser. They provide long-term stability at 30-40% transmission for 215 Nm. Fiber core sizes can be produced from 50 to greater than 1,000 µm. Custom cabled or multi-fiber assemblies are also available.

HARTING, Inc. Of North America
Elgin, IL 60123 5538
Jul 21, 2009 Comprised of outdoor rated fiber optic cable pre-assembled with outdoor rated PushPull LC connector, LC fiber optic cable assemblies achieve low loss over long distances with high data-carrying capacity. They feature 2-fiber multimode, wavelength of 850 and 1,310 Nm, and are immune to electromagnetic interference (EMI). IP65/IP67 rated, ready-to-install cable assemblies are offered in various lengths, as well as in single-ended versions.

GAO FiberOptics Inc.
Toronto   Canada
Jul 15, 2009 Hot-swappable 1000Base-CWDW GBIC transceiver plugs into 802.3z standards-compliant GBIC port or slot of Cisco switch or router in fiber-optic networks. Suited for telecom and data communications applications, product is designed to support SONET, Gigabit Ethernet, Fibre Channel, and other communications standards.

GAO FiberOptics Inc.
Toronto   Canada
Jul 14, 2009 Optimized for 10/100/1000 Mbps Gigabit optical Ethernet transmission networks, Model MG1000A conducts transmission of packets over VLAN and extends transmission distance of network from 100 m to 120 km over copper wires. It provides QoS functionality that ensures transmission of VoIP packets, as well as STP to form redundant network. Unit supports mutual signal conversion between 10Base-T/100Base-TX/1000Base-T and 1000Base-SX/LX, and full-duplex/half-duplex transmission modes.

Emerson Process Management
Austin, TX 78754
Jul 08, 2009 Rosemount® Analytical OCX8800 oxygen and combustibles transmitter delivers stable and reliable measurements under many coal-fired conditions, allowing operators to fine-tune fuel-to-air ratio and minimize NOx emissions by properly monitoring burner performance. NEMA 4X rated for weather and corrosion resistance, device can be configured for general purpose installations or for hazardous area locations in which CSA/FM Class 1, Zone 1 ATEX II 2 G EExd and IECex ratings are required.

Corning Cable Systems
Hickory, NC 28603-0489
Jun 29, 2009 Designed for data centers, high-density LANscape® Pretium® Evolved-Density, Growth-Enabled (EDGE) solutions feature preterminated multi-fiber assemblies, or trunks, with minimum bend radius as small as 5 times OD of cable. Cable can be tightly routed around corners and bends, and extra slack can be coiled without causing attenuation. Interconnect cables offer bend radius of up to 8 times OD, while housings are available in 1U and 4U sizes and mount in 19 in. racks or cabinets.

ComNet
Danbury, CT 06810
Jun 26, 2009 Digital fiber optic video transmitters and receivers with bi-directional data include FVTFVR1010SHR single channel with data series, FVT/FVR4014SHR with 4 video and data channels, and FVT/FVR8018SHR with 8 video and data channels. In event of broken fiber connection, video and data transmission is seamlessly re-routed when system is configured in ring topology. Bi-directional data transmission allows for camera PTZ function to be controlled from any monitoring location.

Optec Technology Limited
Kowloon   Hong Kong (prc)
Jun 24, 2009 Suited for demanding applications such as fiber-to-the-desk (FTTD), broadcasting, FTTx, and harsh environment networks, armored cable assemblies have stainless steel metal tubing within cable coating to protect fiber inside cable. Protective metal tubing also prevents damage from rodent bites. Product is available with choice of fiber connectors including LC, FC, SC, ST, MTRJ, and E2000, as well as type of polish including APC, UPC, and PC.

Y-Connect, Inc.
Middletown, PA 17057
Jun 17, 2009 Duplex and Quad LC Adapters include modularized multiport dust shutter providing dust as well as eye protection for Class III A and lower lasers. Units offer secure panel mount latching and are compatible with T.I.A. FOCIS 10B duplex and quad panel cutouts, allowing users to double connection densities using existing simplex or duplex SC adapter panel cutouts, respectively. Available in MM, SM, and APC, products meet UL 94 V-0 flammability requirements and are RoHS compliant.

Y-Connect, Inc.
Middletown, PA 17057
Jun 17, 2009 Suitable for singlemode (SM) and multimode (MM) applications, SC and LC adapters are available with phosphorous bronze sleeve and provide reliable connections between SC and LC connectors. Simplex LC-SC Hybrid adapter is designed with secure panel mount latching and compatible with TIA FOCIS 10B. LC-SC Hybrid adapter, available in MM and SM is offered in blue, beige, green, and black; meets UL 94 V-0 flammability requirements; and is RoHS-compliant.

Electro Standards Laboratories
Cranston, RI 02921 3403
Jun 16, 2009 Fully compliant with 802.3u 100 Base TX/FX standard, QuickSwitch® model 4195 fiber SC duplex to RJ45 auto fallback A/B switch/converter allows for accessing 2 separate SC duplex, multimode, 100 base FX ports from 100 Base TX fast Ethernet port. It has built-in fiber optic/twisted pair copper conversion. Unit allows for setting switch position manually or remotely when in A/B switch mode, while it automatically selects its switch position in auto fallback mode.

Vytran
Morganville, NJ 07751
Jun 16, 2009 Using Graphite Filament Fusion technology, Model PSX-3000 produces clean, low-loss splices in standard and large mode area double-clad fibers. True Core Imaging(TM) and Active Alignment technology provide precise core alignment and splice loss determination, while Windows-based laptop PC interface offers configuration and control, and database records all splicing data. Model PSX-3000 can be set up as simple splicer or as integrated system with cleave, clean, splice, and recoat capabilities.