Lockheed Martin    Sunnyvale, CA 94087
Aug 19, 2011 Constructed with only 2 moving parts, Samarai provides vertical takeoff, stable hover, and on-board video streaming from camera that rotates around its center, delivering 360° view without gimbal. Because vehicle measures just 16 in. long and weighs less than ½ lb, it can be carried in backpack and launched from ground or like boomerang. Design is scalable to meet different missions, including surveillance, reconnaissance, and payload delivery.

Medit, Inc.    Winnipeg, MB R3C2B3  Canada
Aug 17, 2011 Designed to complete close up inspections in tight areas, Quasar Videoscope features 2- and 4-way tip articulation, controlled by dial on monitor; 0.17 in. dia insertion probe; and 4.3 or 5.6 in. screen for displaying live image. Probe tip contains sensitive image sensors. These chips generate 100,000-400,000 pixels in 720 x 480 resolution with focal range from 10-100 mm. Device can record images/video onto SD card and also output video to TV monitor.

GAO RFID Inc.    Toronto   Canada
Aug 16, 2011 Designed to test and troubleshoot wireless networks, Model A0070002 uses locked-phase local and all-digitized medium frequency processing technologies. Unit provides resolution bandwidth of 100 Hz to 1 MHz at accuracy of ±25% (1 MHz) or ±10% (less than 1 MHz). Internal non-volatile memory can store about 200 measurements, which can be downloaded to computer via RS232 interface. Powered by rechargeable lithium battery, analyzer is equipped with 6 in. VGA TFT color LCD for clear signal detail.

Aven, Inc.    Ann Arbor, MI 48108
Aug 16, 2011 With magnification range of 15x-200x and optical zoom capability of 10x or 40x, iLoupe XL2 displays enlarged views on 2.8 in. color LCD screen. Still or video images are captured by 2 MP CMOS sensor and stored in flash memory drive with 2 GB capacity. Using included measurement program, users can record length, perimeter, angle, and surface area of examined objects. Rechargeable battery-powered instrument may also be used as webcam by linking to computer via USB cable.

FEI Company    Hillsboro, OR 97124
Aug 11, 2011 Combining electron optics with analytical sensitivity of ChemiSTEM Technology, Titan(TM) G2 80-200 provides atomic resolution elemental mapping over entire accelerating voltage range of 200-80 kV. System includes X-FEG high brightness gun and DCOR probe corrector, achieving spatial resolution of 0.8 Angstroms in STEM and 0.9 Angstroms in TEM. Large tilt-range, when combined with ChemiSTEM's symmetrically distributed 4-silicon-drift x-ray detector architecture, permits EDX Tomography.

FEI Company    Hillsboro, OR 97124
Aug 11, 2011 Capable of providing high resolution, 3D imaging and analysis on range of sample types, Versa 3D(TM) DualBeam(TM) system lets users adapt capabilities to specific requirements. Configurable platform, available with high-vacuum only or high- and low-vacuum electron imaging hardware, combines Schottky field emission electron beam and high-throughput ion beam technologies. It may also be configured with environmental scanning electron microscopy (ESEM) for in-situ analysis.

Abrisa Technologies    Santa Paula, CA 93060
Aug 11, 2011 Custom-designed to meet user requirements, Abrasion Resistant Optical Windows are available with 3 different levels of anti-reflective coatings that meet various MIL specifications. Coatings maximize optical transmittance while eliminating image ghosting, protecting optical systems in both hostile and common environments. Typical applications include camera lens systems, telescopes, POP displays, menu boards, digital signage, and LCD screens.

Power Technology, Inc.    Little Rock, AR 72219 1117
Aug 10, 2011 Featuring 635 nm wavelength, PM Series meets high-end OEM application needs, including surveying, leveling, alignment, positioning, and barcode reading. Modules contain precision current source that can deliver up to 120 mA of drive current to N-type and P-type diodes in APC, all in CC. Providing output power from 0.1-100 mW, modules feature aspheric glass optics and offer diffraction limited optical performance.

Olympus America, Inc.    Center Valley, PA 18034
Aug 10, 2011 Able to scan one slide in less than 2 min, Virtual slide (VS) model VS120 produces identical digital virtual slide. Semi-automatic and manual focusing modes facilitate work with challenging samples, while image clarity is enhanced via Sample Detection Mask for automatic slide scanning. Solution scans 15 x 15 mm area using 20x objective lens with pixel resolution of 0.345 µm in ~90 sec, while sample detail is enhanced and preserved via Olympus UIS2 optics and custom camera algorithms.

LIMO    Dortmund   Germany
Aug 09, 2011 Requiring minimal maintenance due to passive cooling, LIMO1300-F200-SL808/9xx-EX1472 can be used for thermal conduction and deep penetration welding of metals. Fiber coupling through high-end beam shaping lends to wall-plug efficiency of 30% (including cooling), and defective fiber-optic cable can be replaced without readjustment. Additional features include variety of interfaces to PLC and field busses of all types as well as CE-conformant configuration of safety-relevant interfaces.

Pinpoint Laser Systems    Peabody, MA 01960
Aug 03, 2011 Producing collimated laser reference beam that forms bulls-eye pattern, Proline Alignment Kit is suited for leveling as well as checking and measuring straightness, flatness, squareness, and parallelism. Laser is enclosed in precision machined housing, ensuring laser reference beam is parallel to side and base surfaces within 0.003°, or less than 0.030 in. at 50 ft. Finely ruled target and magnetic base can be moved around for checking alignments, allowing one person to perform work of several.

Faztek, LLC    Fort Wayne, IN 46808
Aug 02, 2011 Offering protection heights from 12-50 in., Safety Light Curtains feature 2-component system that does not require separate control box, allowing transmitter and receiver to be wired directly into safety relay inside control cabinet or PLC. Units provide detection range up to 30 ft, 15 mm beam spacing, and LED indication of light intensity to facilitate alignment. Applications include stamping presses, conveyors, welding booths, robot cells, and assembly machines.

Harvard Apparatus, Inc.    Holliston, MA 01746 1371
Aug 02, 2011 Operated in digital camera fashion, Infrared Contrast Imaging (IRCI) camera detects IR emission influenced in predictable way by surface composition, texture, chemical make-up, thickness, tonicity, and temperature. Emissions are interpreted as distinct color patterns on reported image, identifying physical and physiological features. This allows clear visualization of histological, physiological, morphological, and metabolic phenomena down to cellular level.

New Scale Technologies    Victor, NY 14534
Jul 29, 2011 Measuring 20 x 22 x 16 mm, M3-F focus module replaces fixed lens holders in compact board cameras for biometric detection, medical diagnostics, and machine vision applications. Lifetime exceeds 2 million cycles (fixed) and 500,000 cycles (random), and position repeatability is ±5 microns (uni-directional) and ±20 microns (bi-directional). Able to replace fixed lens holders over CCD or CMOS image sensors without adding to camera size, module accepts glass or polymer lenses.

RiT Technologies, Inc.    Mahwah, NJ 07430
Jul 27, 2011 Addressing datacenter demand for higher optical port density and accelerated installation, PatchView(TM) Xlight(TM) MPO-MPO Tray helps datacenters prepare for migration to next-generation 40G/100G network by using 12-fiber cabling systems and MPO connectors. It lets installers work with MPO cords, is fully compatible with 40G and 100G IEEE 802.3 applications, and is comprised of MPO adapters in 1U of rack space. Upon insertion of Xlight MPO-MPO Jumper, optical and electrical connections are made.

Steelbox    Alpharetta, GA 30005
Jul 27, 2011 Designed to help manage bandwidth and provide access to digital video on IP networks, Steelbox Solution consists of SteelVision video management system, SteelSwitch appliance for aggregating and distributing digital video, SteelVault video storage system, and SteelEdge codecs. SteelSwitch network media appliance handles up to 1.5 Gbps of incoming data and another 3 Gbps of outgoing data - necessary to collect and distribute variety of IP, megapixel, and HD video streams.

Fiberoptics Technology, Inc.    Pomfret, CT 06258
Jul 26, 2011 Suited for large active diameter industrial applications, High Power LED Light Source couples light from monocolor matrix die into fiber optic cable. Resulting output exceeds EKE halogen lamp in active diameter sizes up to 12 mm. Unit offers 6,000 K color temperature, stable output throughout usable life, and active heat management with integral cooling fan. With optional Ethernet and RS485 connectivity, user can control pulsing, overdrive, and timing values over Internet in real-time.

Mitsubishi International Corp., Laser Group    Wood Dale, IL 60191
Jul 26, 2011 Based on resonator technology, HVII Series includes M700 Series control with 15 in. color touchscreen and USB port for data transfer. Self-check function monitors replacement cycle of consumable parts and maintains condition of laser machine at peak performance. By regularly collecting operating data from processing machine and resonator, system prevents unexpected downtime. Other highlights include attached tool storage center, lens failure protection, jet piercing, and end-joint processing.

Exar Corp.    Fremont, CA 94538
Jul 25, 2011 Designed to help future-proof networks, Model MXP2(TM) ASSP is targeted at ROADM/DWDM and Edge Aggregation platforms in OTN transport applications. Device enables development of any service-any port line cards and consolidation of service specific muxponders into single universal design. Eight watt, 2 x 10G single chip solution includes G.709 features such as ODU0, ODUflex, and GMP, enabling services to be mapped to size appropriate OTN containers and multiplexed in single multiplexing stage.

Konica Minolta Sensing Americas, Inc.    Ramsey, NJ 07446
Jul 22, 2011 Software Development Kit (SDK) for handheld FD-5 and FD-7 spectrodensitometers, allows third-party software developers and integrators to interface their software with FD device. Developers can incorporate measurements that directly correspond to ISO 13655.2 guidelines, and measurements can be taken under multiple illuminants, such as M0, M1, M2, and user-defined, within one device. Devices can measure density and color while taking into account fluorescence of paper substrate.