Toshiba America Electronic Components (TAEC)    Irvine, CA 92618-1811
Jun 16, 2008 Housed in 6-pin SDIP package that meets insulation requirements of international safety standards, Model TLP700 features ±2.0 A peak output current, 2 mA supply current, and 5,000 Vrms isolation voltage. Unit consists of integrated photodetector optically coupled to gallium-aluminum-arsenide LED in package measuring 6.8 x 7.62 x 3.65 mm. Operating from -40 to 100°C, device is suited for factory automation equipment, robots, general-purpose inverters, and ac servo motor control.

Avago Technologies    San Jose, CA 95131
Jun 16, 2008 Suited for office and industrial automation applications, optical incremental encoders of HEDM-5540 series offer resolutions up to 1,000 counts/revolution and accurate position control with use of index as reference point. Units are constructed with lensed LED source, IC with detectors and output circuitry, and Mylar codewheel. In addition to 2-channel quadrature output, 30 x 41.1 x 18.3 mm encoder features third channel index output and up to 100 kHz frequency response.

Avago Technologies    San Jose, CA 95131
Jun 16, 2008 Suited for industrial automation applications, AEDx-8xxx series is bearing-less and has integrated 2-channel quadrature outputs as well as third channel index output. RoHS-compliant solution includes RS422 line driver, codewheel, LED light source, and detector IC enclosed in plastic, 20 x 18 mm package. Offering up to 500 cycles/revolution, encoders work with 2-5 mm shaft diameter motors. Collimated light source and photo detector array design promote mounting misalignment tolerance.

Phoenix Contact    Harrisburg, PA 17111 0100
Jun 13, 2008 Designed for industrial Ethernet and PROFINET applications, VARIOSUB Push-Pull plug connector system enables transmission of data and power signals directly to local devices. It comes in 3 versions: RJ45 for copper data transmission, SCRJ for fiber optic data transmission, and COMBICON device connection technology for power transmission. Available in metal and plastic, connectors can be operated with one hand, simplifying network installation.

Avago Technologies    San Jose, CA 95131
Jun 13, 2008 Complying with automotive AEC-Q100 guidelines, ACPL-312T provides 2.5 A max peak output current to drive high powered IGBTs/MOSFETs and operates in temperatures from -40°C to +125°C. Propagation delay of 0.5 µsec allows circuit designer to reduce switching dead time and improve inverter efficiency. It offers min CMR of 25 kV/µsec at VCM = 1,500 V for noise elimination and undervoltage lockout for additional protection.

Avago Technologies    San Jose, CA 95131
Jun 13, 2008 Offered with various counts/revolution and shaft diameter options, AEDT-9140 Optical Encoder Modules feature 2 channel quadrature outputs plus third channel index output. They are designed for use with codewheel that has optical radius of 0.433 in. for 100-512 counts/rev and 0.460 in. for 1,000 counts/rev. Including lensed LED source and detector IC enclosed in plastic package, units operate in temperatures from -40 to 115°C.

Avago Technologies    San Jose, CA 95131
Jun 13, 2008 Supporting industry's temperature range of -40°C to +105°C, ACPL-071L, ACPL-074L, and ACPL-M75L high-speed dual-supply voltage digital CMOS optocouplers operate in +3.3 V and +5 V supply voltages at minimum speed of 15 MBd. Single channel ACPL-071L/M75L and dual channel ACPL 074L can prevent any output disruption in case of power supply loss or recovery. Available in SO-5 and SO-8 packaging, units are IEC/EN/DIN EN 60747-5-2, UL1577, and CSA compliant for reinforced insulation.

Avago Technologies    San Jose, CA 95131
Jun 13, 2008 Featuring 2.5 A maximum peak output current, ACPL-K312 gate drive optocoupler offers fast IGBT switching, making it suitable for IGBT/MOSFET gate drives, ac/brushless dc motor drives, industrial inverters, and switching power supplies. Supporting operating temperature range of -40 to +100°C, CSA approved unit offers low power consumption with Icc of 3.0 mA and CMR of 15 kV/ms at Vcm = 1.5 kV. Undervoltage lockout prevents undesired IGBT turn-on which can lead to long term damage.

WorldViz LLC    Santa Barbara, CA 93101
Jun 13, 2008 With ability to cover areas larger than size of football field, PPT-H tracking system can handle full body tracking of head, hands, and feet. System is based on intelligent cameras, and also features PPT Studio 2008 software which offers tracking tools that provide 6DOF tracking for HMDs, CAVEs, body motion capture, and other applications.

Thermo Fisher Scientific    Waltham, MA 02454
Jun 12, 2008 Designed for research, quality control, and teaching needs, Helios Zeta double-beam and Helios Omega single-beam UV-visible spectrophotometers analyze liquid and solid samples. VISIONsecurity, VISIONlife and VISIONpro software interfaces provide PC control of unit, and customized manipulation of data is done using built-in Math functions and UVcalc spreadsheet feature. Report templates can be created for customized laboratory reporting and documentation of results.

Medit, Inc.    Winnipeg, MB R3C2B3  Canada
Jun 12, 2008 Featuring 32 mm conical eyepiece and stainless steel insertion tube, Rigid Glass Lens Borescopes use internal fiber optic light cables for direct illumination of inspection area. Available in 2.7, 4, 5, and 6 mm models, units come in lengths of 175, 302, 430, and 600 mm with 0, 30, 70, and 90° angles of view. All feature minimum 50° field of view, water- and oil-proof insertion tube, padded case, and portable LED light source.

Sperian Protection US Headquarters    Smithfield, RI 02917
Jun 12, 2008 Featuring padded temple tips and non-slip nose bridge, ANSI Z87+ compliant A900 Series offers side coverage with wraparound, distortion-free polycarbonate lenses available in clear, TSR® gray, and silver mirror tints. It comes with Fog-ban® anti-fog coating or scratch-resistant hardcoat. A900 Series Reader Magnifiers offer 180° field of vision, high impact, hardcoat, and UV protection, and come in lens tints of clear or TSR gray with magnifier strengths of +1.5, +2.0, and +2.5.

Contex    Herndon, VA 20170
Jun 11, 2008 Suited for users who primarily scan technical documents and maps, SD Series of scanners with CIS technology can separate fine lines and details in technical documents. Developed for decentralized scanning environments, 44 in. scanners are ENERGY STAR compliant for lower energy use. Features include 66 lb weight, USB 2.0 xDTR, All Wheel Drive for optimal document transport and hold, 16-bit B/W capture, and face-up scanning to help simplify jobs and protect originals.

Toa Electronics, Inc.    South San Francisco, CA 94080
Jun 09, 2008 Suited for indoor and outdoor use, CV-Series Vandal Resistant Day/Night Color Mini-Dome camera operates as color camera in daylight and monochrome camera in darkness. Body is made of die-cast aluminum alloy with polycarbonate dome cover making it resistant to vandalism and abuse. With dustproof and waterproof construction, C-CV854D-9 flicker-free camera features backlight compensation function, 3-axis mount, 3-9 mm lens, and dual voltage of 24 Vac or 12 Vdc.

Toa Electronics, Inc.    South San Francisco, CA 94080
Jun 09, 2008 With backlight compensation function that enables operation under various lighting conditions, CV-Series Outdoor Day/Night Color Cameras are water and dust resistant to withstand outdoor use. Flicker-free cameras feature 3-axis mount, focus adjustment switch to achieve optimal focus in daylight and low-light conditions, and selectable 24 Vac or 12 Vdc voltage. Models C-CV454D-3, C-CV454D-9, and C-CV454D-18 are supplied with 3-9 mm, 9-22 mm, and 18-50 mm lenses, respectively.

FARO Technologies, Inc.    Lake Mary, FL 32746 6204
Jun 09, 2008 Photon and LS Laser Scanners, using FARO Scene v4.5 software, support combining of scans into clusters and their relative alignment. Software also automatically accounts for common slab thicknesses and accelerates scanning alignment by letting users perform registration with common facility objects, including pipes and planes. Other features include support for alignment with checkerboard paper targets and 3D visualization with gap-filling and gradient background color capabilities.

TOFRA, Inc.    Palo Alto, CA 94303
Jun 06, 2008 RGB LED Light Source enables independent control of red (619 nm), green (515 nm), and blue (465 nm) LEDs to create any desired color, including white light, for visual observation. Color images can be produced from monochrome cameras, giving full non-interpolated color at every pixel. Light source head mounts instead of condenser on upright microscopes and does not create any vibration or noise. Light source controller connects to computer serial or USB port.

Epner Technology, Inc.    Greenpoint, NY 11222
Jun 05, 2008 NADCAP-certified electroless nickel plating meets MIL-C-26074D, ASTM B-656 and B-733, AMS 2404 and 2405, as well as aerospace contractor specs for corrosion resistance, hardness, and lubricity. With .001 in. thick deposit, it is available in high-phosphorous electroless nickel for dip brazed aluminum heat exchangers. Laser nickel, also available, offers .008 in. thick pit-free electroless deposit designed for optical polishing.

3M Company / Electronic Products Division    Austin, TX 78769
Jun 05, 2008 Designed for analog video applications, No Polish Connector SC/APC is pre-assembled to speed on-site installation of 250 and 900 micron connections. Solution features factory-polished ferrule assembly and can be installed with field tool in under 2 min. Keyed angle cleave mechanical splice feature minimizes connection gap while maximizing optical reflection performance. This results in back reflection of under -60 dB across temperature range.

Flir Systems, Inc.    North Billerica, MA 01862
Jun 03, 2008 ThermaCAM® P660 can automatically record location of equipment as well as tag captured IR images for determining equipment failure patterns before failure occurs. Along with thermal sensitivity of less than 45 mK and accuracy to ±1% or ±1°C, thermal imaging camera features 3.2 Megapixel visible light camera, target illuminator, and 640 x 480 detector array. Wireless LAN-based remote control and display enable equipment monitoring at safe distances.