|
|
|
|
|
Optics & Photonics
(Showing headlines 1481 - 1500) << 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 ...
|
 Laser Source is tunable from 345-2,500 nm.Newport Corp.
Irvine, CA 92606
Jun 09, 2009
Optimized for use with Mai TaiŪ HP ultrafast laser, Inspire(TM) Optical Parametric Oscillator is suited for advanced imaging and spectroscopy applications. Fully automated for computer-controlled tuning, it delivers greater than 1 W average power from 345-520 nm and more than 400 mW from 490-750 nm. Providomg gap-free adjustable pulse widths from 80-350 fs, tunable ultrafast laser source is insensitive to ambient temperature changes.
|
 Network Video Recorder includes internal RAID.Vicon Industries Inc.
Hauppauge, NY 11788
Jun 09, 2009
Pre-loaded with ViconNet video management software, single chassis NVR Shadow includes up to 6.5 TB of usable, internal storage space in RAID 5 configuration. System provides extended storage through 8 hot-swappable drives that are accessible from front of unit. It can simultaneously record 50-95 cameras, depending on cameras' frame rate, recording quality, and resolution. Operating system drive, as well as CD/DVD, are not part of RAID array and are located internally.
|
 Selective Wavelength Photodiode operates between 450-570 nm.Opto Diode Corp.
Newbury Park, CA 91320
Jun 09, 2009
Designed for automotive and colorimetry industries, ODD-525W has active area of 0.62 mm2, and peak sensitivity response of 525 nm. Features included are spectral bandwidth of 70 nm, and storage and operating temperatures range between -30°C to 85°C and lead soldering temperature at 260°C. Available in hermetically sealed standard TO-46 can, unit can be used in auto light-dimming, fluorescence detection, color sensors, and daylight detection tasks.
|
Dual Laser Diode Source suits optical transmission testing.GAO FiberOptics Inc.
Toronto Canada
Jun 09, 2009
Suitable for detection of optical transmission systems, device attenuation, and optical core checks, Series GAO3C B is compatible with international optical instruments standards and is non-interfering. Light sources offer 850, 1,300, 1,550, 1,310/1,550, and 850/1,300 nm optional wavelengths together with switchable modulation frequencies to meet various requirements. Series supports FC, ST, and SC adapters.
|
 Network Video Recorders enhance surveillance capabilities.QNAP Systems, Inc.
Taiwan China
Jun 08, 2009
Compatible with IP-based cameras and network video servers of various brands, 12-channel VioStor-2012 and 8-channel VioStor-2008 support megapixel recording, 4 TB storage capacity, and high quality A/V monitoring in small business/SOHO environments. Each 2-bay, 1.6 GHz IntelŪ Atom(TM)-based network surveillance system features 1GB DDRII memory, DOM architecture, and 3.0 firmware. Linux-based solutions support M-JPEG, MPEG-4, and H.264 video compression as well as intelligent data search.
|
 Fiber Optic Power Meter tests power within 800-1,600 nm.GAO Tek Inc.
Toronto M1B2K4 Canada
Jun 05, 2009
Featuring 3 modulated signals, auto-wave recognition, low-power consumption, and large LCD screen, ruggedized fiber optic power meter GAO560 is suited for field testing. It can automatically recognize wavelength and offers testing range between -70 and 10 dBm, while moveable connector enables several types of connections, including FC and SC. Product can be combined with optical light sources and visual fault locators for testing fibers with different wavelengths simultaneously.
|
 Solid State Lasers are designed for industrial applications.InnoLas Systems GmbH
Krailling Germany
Jun 05, 2009
With performance up to 25 W, InnoLas NANIO industrial DPSS lasers operate in wavelength of 1064 and 532, and have pulse repetition rate of 500 kHz with single shot.
Tube and cable length between laser head and supply unit and/or cooling unit can range from 1-20 m. Units can be used in working processes of marking and structuring of semiconductors, metals, plastics and ceramics. Lasers are suited for manufacturing of solar cells, for micro material processing and scientific applications.
|
 Dichroic Beamsplitters suit image-splitting applications.Semrock Inc.
Rochester, NY 14624
Jun 05, 2009
Targeted for high-speed and simultaneous multi-color imaging techniques, hard-coated dichroic beamsplitters can handle both transmitted and reflected light when separating beams of light by wavelength for simultaneous capture of multiple images. Filters are available in 25 x 36 mm rectangular size to fit most microscopes. Anti-reflection coating on backside provides transmission typically exceeding 95% average and minimizes artifacts from multiple reflections.
|
Optical Transceivers are compatible with HP devices.GAO FiberOptics Inc.
Toronto Canada
Jun 05, 2009
Model J4858A HP compatible transceivers are 1000BASE-SX-SFP transceiver modules used for multimode fiber at 850 nm wavelengths. Hot-pluggable transceivers connect electrical circuitry of module with optical or copper network, and feature internal serial EEPROM that is encoded with security information. Units can be used in conjunction with any SFP module that HP device supports.
|
 Mirror Mount is designed for research and OEM applications.Newport Corp.
Irvine, CA 92606
Jun 03, 2009
Maintaining standard 1 in. optical axis height, compact V100-CP CenterPoint(TM) mirror mount holds mirror directly above and inline with mounting hole. Clear quadrant mount is English or Metric mounting compatible and can be rotated to steer reflected beam over 270°. In high-density layouts, product can be positioned on adjacent table mounting holes which are only 1 in. apart. Device is utilized in assemblies that require periscopes, delay lines, and polarizer inverters.
|
 Transceivers are hot swappable.GAO FiberOptics Inc.
Toronto Canada
Jun 02, 2009
Protocol-independent 10G-XEANPK-LR compatible transceivers operate at wavelength of 1,310 nm, are designed for 10 Gb/sec SONET/SDH, Fibre Channel, Ethernet gigabit, and 10 Gb Ethernet. Targeted at MMF applications, units are Cisco and Foundry compatible. XFP transceivers offer wide variety of 10 Gb Ethernet connectivity options for operation in data centers, enterprise wiring closets, and services providing transport applications.
|
Optical Power Meter aids in CATV network maintenance.GAO Instruments Inc.,
Toronto Canada
Jun 02, 2009
Used for optical identification and fault location of single mode fiber or multimode fiber, portable GAODS3020 is designed for installation, calibration, and maintenance of telecom and CATV network projects. Battery powered unit is suited for field operation, and also provides automatic hints or warning alarms in case of failure.
|
 Multiplexers target high-density CCTV applications.ComNet
Danbury, CT 06810
Jun 01, 2009
Available for use over multimode or single mode optical fiber, F32V8DT/R(M)(S)1 Series video/data multiplexer transmitters/receivers support 32 channels of video with 8 channels of bi-directional serial data. Units offer 10-bit RS250C Short-Haul Quality video performance and can transport video up to 20 km between locations. Series is suited for applications such as airports and parking garages, which require large number of CCTV cameras and may have remote control center.
|
 Spectrophotometer performs high-speed wavelength scanning.Hach Co.
Loveland, CO 80539-0389
Jun 01, 2009
DR 3800 Benchtop Spectrophotometer features high-speed wavelength scanning in entire visible range, which can be used for method development or maintaining consistency of colored products. Color touch screen user interface displays warnings in red, while on-screen Help Guide working procedures helps reduce errors. Optional LINK2SCŪ software allows for comparison of lab and process measurements, providing user with timely information to control plant processes.
|
Production Scanner can digitize wide range of documents.BOWE BELL + HOWELL
Wheeling, IL 60090
Jun 01, 2009
Ngenuity digitizes documents, from rice paper to plastic cards to stuffed envelopes to fetal monitoring strips, at speeds up to 150 ppm at 200 dpi in color, bitonal, and grayscale. Rotary paper path allows users to scan most documents, while straight pass through paper path offers alternative for scanning exception documents that might not make turn through rotary path. SharpShooter(TM) cameras ensure 600 dpi optical capture while LED illumination provides scans with optimal image quality.
|
Discrete-Input Transmitters enable wireless plant monitoring.Honeywell International, Inc.
Morristown, NJ 07960
Jun 01, 2009
Approved for hazardous areas, STXW 500 and STTW 401 convert any measurement device with contact-closure switch input into wireless input. Products can transmit signals from up to 3 contact switches; STXW 500 accepts 3 discrete/digital inputs, while STTW 401 accepts thermocouple input and 2 discrete/digital inputs. Both work under OneWireless(TM) industrial wireless mesh network and are suited for applications such as monitoring level switches, pump status, and system alarms.
|
Fiber Optic Transceiver is NETGEAR compatible.GAO FiberOptics Inc.
Toronto Canada
Jun 01, 2009
Operating on ordinary multimode fiber (MMF) with optic link spans up to 1,815 ft long, AGM721F provides fiber connectivity to NETGEAR switches such as FSM750S, FSM726S, and FSM726. Transceiver is compliant with IEEE 802.3z standard and features 1000BASE-SX hot-swappable function.
|
 Intelligent Handheld Power Meter suits field use.GAO Instruments Inc.,
Toronto Canada
May 29, 2009
Designed for absolute optic power and relative loss measurements of fiber optics, GAO08121/08122 can be utilized in telecom and CATV maintenance and fiber optics test labs. Dust and water resistant unit includes high resolution LCD screen that displays optic power in mW, dB, and dBm, and consumes less power due to auto-off function. Other features included are RS232 upload communication port, auto-identification of frequency, and data storage function.
|
Single Fiber Fusion Splicer operates automatically.GAO FiberOptics Inc.
Toronto Canada
May 29, 2009
Designed for splicing dispersion shifted, non-zero dispersion shifted, and erbium doped fibers, single fiber fusion splicer GAO1202 has auto-check end-face of fiber function, auto-calculation of splicing loss and auto-select suitable fusion program. Mechanical splices typically only have 0.01-0.02 dB loss. Unit automatically adjusts to environmental conditions such as temperature and humidity. Pressure sensors provide constant feedback control for regulation of fusion arc temperature.
|
 Fiber Optic Connection System suits point-to-point cabling.Neutrik AG
Lakewood, NJ 08701
May 28, 2009
Rated IP65 for dust tight and water jet protection, opticalCON QUAD provides fiber solution for any live event. System is available with 4-channel mobile field cables, as well as triple-split 12-channel assemblies featuring 3 opticalCON-4 connectors on both ends, allowing standardized 4-channel connectivity for multi-channel point-to-point cabling. Offering cut-proof and rodent-resistant double jacket with glass yarn armored cable, QUAD X-treme is suitable for road-ready applications.
|
(Showing headlines 1481 - 1500) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203
|
|
|