GAO RFID Inc.    Toronto   Canada
Feb 05, 2013 Used in pairs, C016PB01 plugs into Ethernet SFP port of D-Link switch or router to link port with network. This D-Link compatible 1000Base-LX SFP bidirectional transceiver uses standard simplex LC connectors and provides max transmission distance over 9/125 micron single mode fiber. While transmitter section uses 1,550 nm DFB laser/1,310 nm Fabry-Perot laser, receiver section uses integrated B type/A type detector preamplifier mounted in optical header and limiting post-amplifier IC.

Fujikura Europe Ltd, Fibre Optics Division    Chessington, Surrey KT9 2NY,  United Kingdom
Feb 05, 2013 Measuring 121 x 162 x 57 mm, 12S is designed for fiber installation in small, narrow spaces. Li-ion battery lets this unit perform 100+ splices on one charge, while fixed v-groove and dual-axis observation system promotes reliable splicing between 0.05 dB SM and 0.02 dB MM. Viable for use in indoor and outdoor conditions, splicer has Hi-Res LCD monitor that provides clear image of fiber and carrying case that doubles as place-and-splice table.

Psiber Data Systems, Inc.    San Diego, CA 92120
Feb 04, 2013 Available for WireXpert cable certification tester, MPO Parallel Optics Test Solution features 5 sec Autotest that includes detection of fiber connection map and measurement of loss on each channel. Ability to configure active fibers enables testing of customized parallel optic links such as 8-fiber MPO links. With interoperability between MPO source adapter and multimode fiber adapter of WireXpert, testing of breakout links from MPO end to SC/LC end is possible.

Edmund Optics    Barrington, NJ 08007
Feb 01, 2013 Available in 22 different filter combinations for both Olympus and Nikon microscopes, TECHSPEC® Pre-Mounted Fluorescence Filter Cubes each include one TECHSPEC Fluorescence Dichroic Filter and 2 TECHSPEC Fluorescence Bandpass Filters, which have been specifically oriented for optimal excitation and emission of popular fluorophores. Filters may be removed and replaced depending upon application requirements.

Newport Corp.    Irvine, CA 92606
Feb 01, 2013 Available in 4 x 6 in., 6 x 6 in., 8 x 8 in., 6 x 24 in., and 6 x 36 in. sizes, SA2 Series provides stable, lightweight platform for optical components and sub-assemblies. Grid of tapped holes extends to within 0.5 in. of plate edges, while in-grid counter-bored holes and edge chamfers facilitate lifting, aligning, and integrating SA2 onto standard optical tables. While imperial standard models feature ¼-20 tapped holes on 1 in. grid, metric models feature M6 tapped holes on 25 mm grid.

Toshiba America Information Systems, Inc    Irvine, CA 92618-1697
Jan 31, 2013 Offering SMBs drop-in replacement for legacy analog video systems, ESV4 fosters IP network video surveillance system deployment. This embedded NVR, with HDMI output in 1080p, supports simultaneous recording of up to 4 Toshiba or OnVIF-compliant IP cameras with 5 MP max resolution. Along with interface that facilitates operation via local recorder, browser, or mobile device, features include Video Management Software and 6 TB max video storage via 2 internal high-speed SATA HDDs.

Abrisa Technologies    Santa Paula, CA 93060
Jan 31, 2013 Suitable for glass thicknesses down to 0.07 mm, Tin Oxide and Index-Matched Indium Tin Oxide as well as narrow and broadband AR coatings optimize optical throughput and minimize stray light noise while providing low reflectance. Coatings can be applied to 150 and 200 mm wafers as well as 6 in. square substrates. Applications include spatial light modulators, micro-displays, and optical shutters; mobile and vehicle mounted displays; and slim format sensor cover glass.

GAO FiberOptics Inc.    Toronto   Canada
Jan 31, 2013 Modular, plug-and-play C0310001 converts Optical-Electric Ethernet signals between 10/100/1000M UTP interface (TX) and 1000M optical fiber interface (FX). With respective transmission distances of up to 80 km and 550 m, media converter works with single- and multi-mode fiber and operates at 1,310/1,550 nm in single fiber WDM and 850 nm in multi-mode. Along with auto-negotiation, features include support for automatic cross of twisted pair ports and auto selection of MDI/MDI-X.

Optec Technology Limited    Kowloon   Hong Kong (prc)
Jan 30, 2013 Featuring pre-polished, pre-assembled design, SwiftTerm™ SC eliminates need for epoxy, hand polishing, and crimping at site. Ceramic ferrule C-slot design facilitates fiber interconnections inside ferrule hole, resolving fundamental problems with conventional V-Groove option. Design also ensures high precision on fiber alignment while avoiding deformation and deterioration. With ceramic inner structure, connector can sustain high stability in extreme temperatures of -40 to +85°C.

Spectra-Physics, Inc.    Mountain View, CA 94043
Jan 30, 2013 Pumped with Millennia® eV™, Matisse® tunable, single-frequency laser offers over 6.5 W of output, 60 kHz external linewidth, and near diffraction-limited TEM00 beam quality. Also available, Solstice® single-box ultrafast amplifier produces less than 50 fs pulses in kHz repetition rate regime and doubles peak power at greater than 70 GW. XP cavity provides optimal beam quality for driving optical parameter amplifier (OPA) systems with M2 less than 1.3.

Newport Corp.    Irvine, CA 92606
Jan 30, 2013 Designed with excimer-grade UV fused silica substrates and polished to better than λ/10 flatness and 10-5 surface quality, Long-Lived Deep UV Excimer Laser Mirrors offer projected lifetimes >30 billion pulses when used in proper photocontamination controlled environment. All dielectric high reflector coatings minimize absorption and maximize reflected energy at 193 nm. With special Pet-G and metal foil packaging, parts are delivered clean and protected from environmental photocontamination.

Tektronix, Inc.    Beaverton, OR 97077
Jan 28, 2013 Allowing engineers to analyze captured data across domains at any time using correlated markers, RSA5000 Series includes 26.5 and 15 GHz models with 110 MHz bandwidth option that addresses frequency range requirements of wireless communications standards. DPX spectrum display offers intuitive, live color view of signal transients as they change over time in frequency domain, and set of triggers allows troubleshooting of digitally implemented RF systems.

Baumer Ltd.    Southington, CT 06489 1534
Jan 28, 2013 Measuring 58 mm in diameter, OptoPulse EIL580 Series includes clamping flange encoders with 10 mm solid shafts, synchro flange encoders with 6 mm solid shafts, and 8–15 mm blind hollow shaft and through hollow shaft models. All feature finely graduated disc increments that provide 100–5,000 impulses/turn. Featuring solid die-cast housings with 1.5 mm aluminum walls, encoders' optical sensing capability ensures absolute accuracy and consistent signal quality in temperatures from -40 to +85°C. 

Spectra-Physics, Inc.    Mountain View, CA 94043
Jan 25, 2013 Spirit™ 8 W industrial-grade laser features average power of greater than 8 W in IR at 1,040 nm, with second harmonic option for generating green femtosecond (fs) pulses. Able to be used in micromachining applications without producing unwanted heat damage to processed material, product delivers 400 fs pulse widths with pulse energies of greater than 40 µJ. Fully automated solution is adjustable via computer over range of repetition rates from single shot up to 1 MHz.

GAO FiberOptics Inc.    Toronto   Canada
Jan 25, 2013 Integrating functions of digital optical phone and stabilized light source into one unit, model C0240001 carries out full-duplex communication and operates at 1,310 or 1,550 nm. Modulation frequencies include 270 Hz, 1 kHz, 2 kHz, and CW. Used during installation, optical testing, maintenance, and fiber attenuation value testing in data, CATV, and telecom networks, product provides transmission distance of up to 80 km and output power range of -5 to -7 dBm.

Fiberguide Industries, Inc.    Stirling, NJ 07980
Jan 24, 2013 Designed for integration into fiber-based systems performing high power transmission, UniClad Optical Fiber uses large core-to-clad ratio to minimize stress transfer to core, optimizing focal ratio degradation in lasers used for cutting, welding, drilling, soldering, and marking. Fiber features pure fused silica core and doped fused silica cladding with polymer coating. It has fixed 500 µm cladding diameter for 100-400 µm core sizes, and proportionately larger cladding for 600-800 µm sizes.

Multipix Imaging Ltd.    Bedford Road   United Kingdom
Jan 24, 2013 Offered with 6K, 8K, and 12K resolutions, 56 mm wide and 62 mm high Basler Racer line scan cameras are available with Gigabit Ethernet or CameraLink interface. Max line rate for 8K model featuring CameraLink interface is 80 kHz. Sensitivity of CMOS sensor technology promotes image quality, with low noise characteristics and quantum efficiency of ~60%. CMOS sensors also help minimize power draw, and their heat dissipation concept helps cameras stay cool.

Electro-Chemical Devices, Inc.    Yorba Linda, CA 92887
Jan 24, 2013 With ¾ in. OD 316 stainless steel body, Model T80 Universal Transmitter is designed for continuous measurement of pH, ORP, pION, Dissolved Oxygen, Turbidity, Conductivity, or Resistivity in general-purpose industrial environment. Product digitally communicates with any Model S80 Intelligent Sensor and automatically configures menus and display screens. Transmitter also accepts any standard pH, ORP, or pION sensor with solution ground using optional T80 input card.

United Technologies Corp.    Hartford, CT 06101
Jan 24, 2013 With 2,048 pixels at 76,000 lps, GL2048L-10A InGaAs SWIR Camera supports SD-OCT when used at center wavelengths of 1.05, 1.31, or 1.55 microns. Unit's 10 micron pitch enables ophthalmic OCT instrumentation companies to adapt their current 0.84 micron SD-OCT spectrometers, which use same pitch. Imaging aperture is 210 microns, providing alignment for fiber-optic based spectrometers. Camera also supports rates down to 100 lps for inspection applications that need up to 10 ms integration times.

Ophir-Spiricon Inc.    Logan, UT 84321
Jan 24, 2013 Working with CW and pulsed lasers down to single shot rates, Photon M2-1780 automatically measures M2 beam propagation ratio and all associated ISO 11146 parameters instantaneously at video rates over 20 Hz. CCD camera-based system, sensitive to wavelengths from ~250–1,100 nm, automatically measures with NIST-traceable accuracy to better than 2%. This translates to M2 measurements with accuracy to -5%. System works in conjunction with FireWire BeamPro Acquisition and Analysis software.