Re-Grip, Inc    Lake Elisnore, CA 92530-2306
Jan 13, 2012 Re-Grip fits any handle that is cylindrical or semi-cylindrical on tools, sports equipment, or in industrial applications. Elastic grip is extended by helically spun inner coil with UV-resistant properties. Non-slip properties and ergonomic design redistribute energy to reduce muscle fatigue. Available in standard 7 in. length, material has clearance of 1.3, 1.6, and 2.1 in. Custom sizes are available.

Heyco Stamped Products, Inc.    Toms River, NJ 08754
Dec 19, 2011 Intended for use in clearance or threaded holes, Heyco®-Tite Hybrid Liquid Tight Cordgrips deliver strain relief protection. Products make it possible to insert different diameters of cable, from .04-2.17 in., into same cable gland with good sealing. Along with nickel plated brass enclosure, IP68-rated cordgrips feature nylon finger design for secure wire gripping and sealing gland molded in TPE material for flexibility.

Automation Systems Interconnect Inc.    Mechanicsburg, PA 17055
Nov 01, 2010 Designed for use when additional support to cable is needed, Spiralblock® Cord Grips support up to 5 in. of cable as it enters enclosure or panel. Flexible design of nylon grip allows cable to bend without breaking or putting excess strain at cable entry point to enclosure. Available in light grey or black and in PG or Metric threads, grips are suitable for environments ranging from -20 to 90°C.

Heyco Products    Toms River, NJ 08753
Aug 06, 2010 Available in PG, NPT, and metric threads in variety of sizes, Right Angle Cord Grips feature all nylon construction with Buna N sealing gland that resists salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. Each is molded in open position to facilitate installation. After cable insertion, fitting snaps closed while bending cable without damage. UL and CSA certified, cord grips are suitable for NEMA 6P enclosures and have 94V-2 flammability rating.

Heyco Products    Toms River, NJ 08753
Jun 02, 2010 Providing watertight seal for PV module output leads to inverters, Masthead(TM) II Cordgrips are constructed of UV resistant nylon with TPE or Buna N Sealing Gland to resist salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. They also meet 94 V-2 flammability and IP68 ratings, and have temperature rating of -22 to 212°F. Provided with assembled metal locknut and NPT threads, cordgrips can be attached directly to rigid (PVC) or EMT-type conduit via adapter.

Pass & Seymour/Legrand    Syracuse, NY 13221
Apr 23, 2010 Available in 316L stainless steel for use in corrosive and exterior environments, FS 41 FASTRUT Connector secures wire mesh tray to strut channel framing without bolts, nuts, or clamps. Unit snaps into place and is held secure by spring steel materials and locking edge design. Connector attaches any size wire cable tray to channel framing using 2 connectors for 12 in. tray or narrower and 3 connectors for larger tray widths.

Appleton Electric    Cambridge, ON N3H2N1
Jan 26, 2010 For use in food processing plants, breweries, waste water treatment centers, and petrochemical facilities, Stainless Steel and Nickel Plated Aluminum Corrosion-Resistant Cord Grips are available in hub sizes of 3/8-2 in. or 3/8-1 in. Compact cord grips terminate flexible metallic electrical cable at conduit hub or knockout to provide environmental seal against water and other contaminants. They are offered with or without strain reliefs that protect against cable pullout and conductor breakage.

Heyco Products    Toms River, NJ 08753
Jan 22, 2010 Available in multiple sizes for cable diameters ranging from 0.10-1.00 in., Electromagnetic Compatibility (EMC) Cordgrips handle temperatures from -40 to 212°F. They are made of nickel-plated brass with TPE gland, have long thread for use in standard or thick panels and provide 360° shield contact with sleeve due to braided shield which runs into gland. IP68 rated cordgrips are available in PG and metric thread with optional EMC locknuts that have cutting teeth to provide optimal shield contact.

Heyco Products    Toms River, NJ 08753
Nov 30, 2009 Designed to replace combiner boxes in solar rooftop installations, Solar Masthead(TM) cordgrips are resistant to salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. Constructed of UV resistant nylon with TPE or Buna N sealing gland, IP68 and 94V-2 flammability rated units can handle temperatures from -22 to 212°F. They are threaded into adapter that allows them to be attached directly to rigid (PVC) or EMT type conduit.

General Machine Products Co.    Trevose, PA 19053
Oct 23, 2009 Available in sizes ranging from 1-2.5 in. in length, Innerduct Pulling Eyes (Model 61510) feature threaded body that provides secure attachment to innerduct conduit. Hole in threaded end of pulling eye body provides tie-off of innerduct pulling line or tape, ensuring that unit is not lost during pulling operation. Also available with swiveling head-end and hex feature, pulling eyes can accommodate conduit inter-diameter dimensions ranging from 1-2.18 in.

Heyco Products    Toms River, NJ 08753
Aug 14, 2009 Installing without tools or locknuts, Liquid Tight Snap-In Multi-Hole Cordgrips house multiple wires at one entry point while providing liquid tight seal around each wire at electrical panel. Click in place fit reduces tightening errors, while ratchet design of sealing nut assembly provides anti-vibration and firm grip on cable. IP64 rated, constructed of nylon with TPE sealing glands, cordgrips' fingers fit 0.032-0.093 in. panels and prevent rotation when used in Double D mounting holes.

Heyco Products    Toms River, NJ 08753
Aug 19, 2008 Available in variety of cable diameters and mounting hole sizes, Snap-In Cordgrips provide cord and cable strain relief in limited clearance applications inside electrical cabinets and product housings. Cordgrips toollessly lock into cabinet or product housing. Constructed from polyamide 6/6 nylon, units suit any application that utilizes flexible power cord in non-liquid tight environment or where short assembly time is important to OEM manufacturers.

Durable Mecco    Franklin Park, IL 60131
Oct 30, 2007 Delivering hand protection, Safety First Stamp Grip provides 4 in. diameter shield and acts as extension of hand stamp, offering alternative for operators who prefer to hold stamps in-hand. Unit is molded from urethane with striking anvil made from heat-treated shock steel.

Heyco Products    Toms River, NJ 08753
Mar 02, 2007 Suited for applications where limited clearance exists inside electrical cabinets/housings, Snap-In Cord Grips can be configured for electrical power, HVAC, and systems-management installations. They allow cords and cables from .079 to more than 1 in. dia to insert through grips, without binding or scraping of insulation which facilitates safe, secure passage. Grips are constructed from polyamide 6/6 nylon, and feature smooth, rounded interior edges.

Anver Corp. - Anver.Com    Hudson, MA 01749
Oct 17, 2006 High Temperature Vacuum Suction Cups feature Viton® fluorocaoutchouc FPM-F rubber pad with heat-resistant felt coating held by metal mounting plate. Suction cups handle hot glass, cookware, and metal objects in pick-and-place applications. Capable of excursions up to 752°F, cups are available in 3.82 in. OD with G 3/8 in. center port. Applications include handling automotive windshields and all types of tempered glass and cookware.

AliMed, Inc.    Dedham, MA 02026
Aug 25, 2006 Designed to keep excess cord lengths neatly contained, Cable Capture helps eliminate potential tripping hazards and allows cords to be identified and removed or added if necessary. Full-sized unit can hold up to 8 ft of standard AC cord, while Cable Capture Jr. holds up to 6 ft of small-diameter cord. Units can be connected together to completely control, organize, and hide multiple cords and cables.

Axcell (Heyco Products, Inc.)    Toms River, NJ 08755
Apr 12, 2006 Heyco-TITE family of cordgrips is suited for flexible wire cables and cords in electrical enclosures including NPT, metric, and PG threads, and is available in straight-thru, pigtail, and right angle configurations. They are made of 6/6 polyamide nylon with Buna N sealing glands, and are resistant to salt water and most common solvents. Units are UL listed, CSA certified, have IP rating of 68 per DIN 40050 up to 70 psi water pressure, and flammability rating of 94V-2.

Axcell (Heyco Products, Inc.)    Toms River, NJ 08755
Jul 22, 2005 Suited for fixed and mobile applications, Snap-In-Mount Cord Grips are custom-manufactured to accommodate cable and wire diameters from .079–1.00 and above. Smooth, rounded interior edges allow insertion of cords and cables through grips without binding or scraping of insulation. Constructed from polyamide 6/6 nylon, products resist pulling, twisting, and pulsing forces; are chemical-resistant; and meet UL 94V-2 flammability requirements.

Coleman Equipment, Inc.    Irvington, NJ 07111
Jun 02, 2004 VacUp Lifting Device utilizes flow from vacuum blower to grip and lift load. Lifting ability is produced by capturing vacuum inside lift hose. Varying vacuum level with raise/lower handle enables load to be moved through 6 ft of lift.

Niagara Plastics Co.    Erie, PA 16509
Dec 01, 2003 RF Series rectangular flat-end grips are available with inside thickness measurements from 1/16–1 in. and inside widths from 3/8 to 4 in. Max length ranges from 2–4½ in. RE Series rectangular round-end grips are offered with inside thickness measurements from 1/16–5/8 in. and inside widths from 0.31–2.115 in. Max length ranges from 1–4½ in. VC Series round grips are available with 0.187–4¾ in. inner diameters and 5.5 in. max length.