Richwood Industries, Inc.
Huntington, WV 25714
Sep 07, 2007 Installed as part of new swing arm sampler or retrofitted into existing one, Correct Cut(TM) System provides complete belt support profile for optimizing sampling quality, operating efficiency, and belt protection. It consists of Combi-Pact® Impact Saddle, which supports belt directly under swing arm cutter, and radius contour Cushion Arc® Idler on each side. System forms and supports belt in optimum position for complete sample collection and spillage reduction.

Habasit America (formerly Habasit Belting)
Suwanee, GA 30024
Aug 24, 2007 Offered as accessory for incline conveyors, M2510 is 3 in. high scoop flight release is engineered to enhance throughput and optimize use of plant space. Scoop increases plastic modular belt carrying capacity, allowing for reduced conveyor speeds while reducing product damage. Suited for carrying light product up inclines, acessory compliments HabasitLINK® M2510 belt style.

Habasit America (formerly Habasit Belting)
Suwanee, GA 30024
Aug 24, 2007 Featuring flat top and 1 in. pitch, M2470 plastic modular belting can be used in place of rollers. Design promotes surface load distribution, minimizing stresses, and scalloped belt module edge produces minimal to no vibration for stack stability. Along with belt/sprocket engagement designed for pulling heavier sheet stacks, belt features abrasion-resistant, closed belt edges and smooth surface with beveled edges to facilitate side transfer.

Ammeraal Beltech Modular (Uni-Chains)
Reading, PA 19611
Aug 01, 2007 Open top uni SNB M2 20% includes lockpin feature for cleanability and has flat surface allowing gentle transport of sensitive products. Suited for incline conveyors, 1 in. pitch belt has products supports with slotted/open hinges for drainage. Applications include meat cooling and freezing lines, pasta blanchers, pasteurizers, can mass handing, and bakery.

Ammeraal Beltech Modular (Uni-Chains)
Reading, PA 19611
Jul 26, 2007 Offering 1 in. pitch, SNB M2 rubber top plastic modular belt is straight-running and suited for inclined transportation of products where drainage is of concern. Product is also available with white rubber top, which carries FDA approval for direct food contact. Other applications include bakery, bottling, canning, corrugated, meat, poultry, and fruits/vegetables.

Intralox, Inc.
Harahan, LA 70123-5395
Mar 21, 2007 Designed to meet hygiene and sanitation requirements in food industries, Series 1650 SeamFree(TM) Minimum Hinge Flat Top Belt consists of 18 in. modules that create smooth upper surface with fully flush edges and recessed rods. Flume design and drive bar mechanism effectively channel water and debris to belt edges, preventing sprockets from pressing debris into hinges. Belt enables transfers as tight as 1.5 in.

Dorner Mfg. Corp.
Hartland, WI 53029 0020
Jan 10, 2007 With 6-60 mm high cleats physically molded into belt, AquaPruf 7600 Series End Drive Conveyors feature sanitary design suitable for handling difficult products such as jelly beans, apples, marinated chicken, and chips. Units have continuous TIG welded 304 SS frame with no horizontal surfaces for optimal cleaning. Available in lengths from 36 in. to 40 ft and widths up to 2 ft, conveyors offer speeds to 328 fpm and handle loads up to 20 lb/sq-ft of belt.

Goodyear Tire & Rubber Co., The
Akron, OH 44316
Jan 08, 2007 Available in straight-tooth, offset-tooth, or helical styles, Polyurethane Timing Belts suit linear motion, product conveyance, and power transmission applications. Steel-cord reinforced belts come in 3 configurations: open-end rolls in 325 ft lengths; welded or jointed belts made from roll material cut to length and spliced; and endless types made from long continuous cord with no splice or welding. To combat corrosion, Kevlar cord belts are available for high humidity applications.

BRECOflex Co., L.L.C.
Eatontown, NJ 07724
Nov 08, 2006 Hytrel® HT Elastic 40+ Silicone Belt is specifically designed to position and convey PVC cards in card printers, card readers, and card handling devices, avoiding any slippage. Silicone coated carrying side of belt provides adhesion of cards in vertical belt drive designs. For tracking reasons, longitudinal belt tracking guides can be implemented. Belt length, width, and thickness can be made to suit application requirements.

Wire Belt Company Of America
Londonderry, NH 03053-7449
Nov 03, 2006 With 76% of open surface, Model TC-327 conveyor belt allows convection and air flow in tortilla cooling conveyor line. Stainless steel design keeps belt from stretching, sagging, or creating fire hazards in high heat operations, while C-CureEdge(TM) closed loop ends ensure safety in production environment. Product is packaged with EZSplice(TM) system that includes pliers kit and sprockets.

BRECOflex Co., L.L.C.
Eatontown, NJ 07724
Jul 21, 2006 Hytrel® HT Elastic 40+ Silicone belt is used to position and convey PVC cards, without any slippage, in card printers, card readers, and card handling devices. It offers strong adhesion in conjunction with PVC Cards at carrying side and smooth surface at running side. Longitudinal belt tracking guides can be implemented, and length, width, and thickness can be made to suit any application. Belt is made without carcass and can be used with fixed shaft centers.

Ammeraal Beltech Modular (Uni-Chains)
Reading, PA 19611
Jun 16, 2006 Featuring one-piece design, 24 in. Single Link Model MPB has full-width molded link, eliminating bricklayed module butted ends. Design removes almost 11 ft, 2 in. of restricted access end surfaces within 20 ft conveyor. Through elimination of directional joints, bacteria growth and cleaning time are minimized.

Ammeraal Beltech Modular (Uni-Chains)
Reading, PA 19611
Jun 12, 2006 Featuring 2.5 in. pitch, uni XLB K318 can replace roller chains, drag chains, steel flat top belts, and other types of chains/belts used in heavy-duty applications. Belt is impact-resistant, wear-resistant, and bi-directional. With positive sprocket drive, full synchronized movement of parallel lanes is ensured. Used on skid conveyors, belt requires no lubrication and is suited for automotive, carwash, palletizing, and paper and cardboard industry.

Ammeraal Beltech Modular (Uni-Chains)
Reading, PA 19611
Jun 12, 2006 Offered in widths from 3.0-118.8 in., Model X-MPB features 2.5 in. pitch and heavy-duty design that allows for impact without breakage. Sprockets are available with 6, 8, 10, or 13 teeth, providing optimal belt engagement for long conveyors. Made of FDA-approved plastic material, belt includes lockpin system to facilitate maintenance.

Flexible Steel Lacing Co.
Downers Grove, IL 60515-4200
May 26, 2006 Available in Medium and Large models, portable Flex-Lifter(TM) safely lifts fully loaded troughed or flat conveyor belts from underneath using adjustable wings or return lift bar, respectively. Beltline maintenance tool, designed for belt widths from 36-60 in. (Medium) and 48-72 in. (Large), raised to max vertical lift heights of 14 and 16 in. Made of anodized aluminum, units can be operated by ratchet, drill motor, or impact wrench.

Intralox, Inc.
Harahan, LA 70123-5395
May 25, 2006 Suited for conveyor applications where sanitation is critical, Series 850 SeamFree(TM) Minimum Hinge Flat Top is drive bar driven to prevent debris from being pressed into hinge area. EZ Clean product, constructed with minimal hinges, also has flume design on belt underside that channels debris away from belt edge. Molded from non-porous, non-absorbent plastics product has 36 in. wide seamless plastic module and no pockets or recessed areas in underside that can harbor debris.

Wire Belt Company Of America
Londonderry, NH 03053-7449
Mar 29, 2006 Designed to handle small, delicate products, Compact Grid(TM) is engineered with 70% open surface area, making it suited for processes in which product coating, drainage, and liquid or air circulation are factors. Open stainless steel design facilitates cooking operations such as frying and baking as well as cooling freshly baked or freshly fried products in high-volume, high-throughput processes.

Ammeraal Beltech Modular (Uni-Chains)
Reading, PA 19611
Feb 24, 2006 Utilizing Snap Link(TM) technology, uni M-PNB M1 belt modules snap together for assembly/disassembly. Pin-less construction facilitates process of changing stained or damaged sections and eliminates crevices and pin holes that would cause sterility and cleaning challenges. Belting has ½ in. pitch design with 40% open mesh surface and smooth running, level underside. Applications include bakeries, cooling conveyors, and food processing.

BRECOflex Co., L.L.C.
Eatontown, NJ 07724
Feb 03, 2006 Truly endless (BFX) polyurethane timing belts utilize bifilar design that represents tension member arrangements with left hand and right hand lay. Tension members alternate to prevent formation of lateral forces, balancing timing belts for true tracking. Bifilar technology minimizes friction forces, lending to positioning accuracy in belt drives. It also improves pitch stability by minimizing deviation of timing belt materials.

FormPak, Inc.
Saint Louis, MO 63133
Jan 11, 2006 Multi-tilting conveyor bed enables automatic ejection of full bulk bags from holder arm style filling frames. Incorporating air bladders and hinges, design eliminates need to drop entire fill head and holder arm assembly. Product is adjustable by one operator, without tools or lifts, and can be integrated into existing holder arm style machines to make them automatic discharge units.