Shakespeare Composite Structures
Newberry, SC 29108
Sep 06, 2007 Eliminating need for lifts or trucks, Tuff-Hinge Composite poles consist of 4 ft direct burial portion embedded into ground and hinged base at ground level. Top portion consists of O-series composite Tuff-Pole® that tilts over to ground level for relamping or other luminaire service, and can then be raised to vertical position. Tamper-resistant poles are available up to 20 ft mounting height, which has 6.6 EPA max load rating at 80 mph.

NEC Electronics
Santa Clara, CA 95050
Sep 05, 2007 Capable of executing more than 2,200 Dhrystone MIPS under nominal conditions, 700 MHz dual-core ARM11 MPCore is implemented using 90 nm process technology and suited for high-speed consumer, enterprise, and networking applications. Achieving speed of 400 MHz, ARM926EJ-S is available for implementation with 130 nm ASIC technology. Jazelle® technology enables direct execution of Java byte codes in hardware, while 16-bit ARM Thumb® instruction set shrinks code size.

Dynamic Engineering Inc.
Ben Lomond, CA 95005
Aug 30, 2007 Along with heat sink built into internal and external walls on 3 sides, PC104p-Chassis features extruded aluminum outer housing with machined end caps that include gasket for watertight operation; EMI gasket is available. Internal card cage is isolated from external housing via bumper pads to optimize vibration and shock adsorption. In addition to custom lengths, options include 1-11 modules, 12 and 28 V power supplies, custom machining, and silk screening.

Rex-Cut Products, Inc.
Fall River, MA 02720
Aug 30, 2007 Layered with non-woven synthetic fiber surface conditioning materials, Rex-Cut® Megabrite T27 Flap Discs expose fresh material as they wear. Units are rated for 13,300 rpm, but provide optimum performance with minimum heat at 6,000 rpm. Available in 4 ½ and 5 in. dia sizes with 7/8 in. holes or 5/8-11 adapters, discs are suitable for cleaning, deburring, blending, and finishing stainless steel, aluminum, and other metals. Color-coded coarse, medium, and very fine grades are offered.

Supermicro Computer, Inc.
San Jose, CA 95131
Aug 29, 2007 Designed for 12 x 13 in. serverboards, SC825MTQ series chassis supports 7 expansion cards, 3 x 3.5 in. hot-swap drive bays for RAID configuration, and 2 high-efficiency 700 W redundant power supplies. With depth of 17.7 in., unit features advanced thermal design. At 14.5 in. deep, model SC523L provides front-side I/O access, is optimized for 12 x 10 in. boards, and supports 7 low-profile add-on cards and 2 fixed internal 3.5 in. hard drives.

Bosch Rexroth Corp.
Hoffman Estates, IL 60192
Aug 28, 2007 Measuring 40 x 20 mm with max length of 350 mm, PSK 40 Precision Module incorporates 6 mm diameter ball screw with option for 1 or 2 mm lead. Ball screw is manufactured to tolerance class 7 with preloaded ball nut for positioning accuracy and stiffness. Ball tracks for linear guide system are machined into precision steel base, which includes machined reference edge and provides high rigidity, making PSK 40 suited for small, multi-axis systems.

Tusk Direct Inc.
Bethel, CT 06801
Aug 24, 2007 ERL double rail guide system features steel shafts that can be staggered on mounts in order to extend length indefinitely. Guide rails consist of 2 precision hardened and ground shafts, 12 mm in dia, predrilled with M5 threaded holes and spaced 100 mm apart. Dual shafts are pulled together by aluminum support block design, ensuring they are parallel to less than or equal to 0.02 mm/1 mm. Support blocks have 2 holes spaced 28 mm apart and can be set at increments of 100 mm apart.

Chassis Plans Inc.
San Diego, CA 92123
Aug 21, 2007 Mission-critical-qualified 2U E9Chassis provides 4 hot swap drive bays for 3½ in. SATA, SCSI, or EIDE drives, allowing RAID implementation. Dual 5¼ in. drive bays enable installation of DVD and tape drives, one 3½ in. drive position provides for floppy drive installation, and one 3½ in. drive can be used for sensitive crypto data or OS. Chassis can accommodate 3 horizontally mounted full-length, full-height plug-in cards or 7 vertically mounted low-profile plug-in cards.

Arsco Manufacturing Co
Cincinnati, OH 45247
Aug 13, 2007 Fin Tube Covers are designed to install over most wall-to-wall, floor-mounted, and wall-mounted electric baseboard heating systems. Covers are pretreated and powder-coated inside and out for finishing that is damage, chip, scratch, fade, and tamper resistant. Units are available in 6 standard colors, or unlimited custom colors; in Grecian, Cloverleaf, or Octagonal grill styles; and in any length, height, or depth.

Grass Act, Inc
Austin, TX 78720-3833
Aug 09, 2007 Designed for irrigation and landscape industries, Ground Topper universal 6 in. valve box cover is placed on top of valve boxes for irrigation systems, septic systems, pools, and homeowner water valve cutoffs to cover opening in ground. One-size-fits-all design installs via twist-and-pull fitting, and flexibility of weather-resistant polypropylene construction facilitates lifting off well as placing product on valve box.

ASG, Div. of Jergens, Inc.
Cleveland, OH 44110
Aug 08, 2007 Designed to help minimize operator fatigue, Heavy-Duty Torque Arm securely maintains tool location while allowing smooth movement of assembly tools in both up-down motion and 180° side-to-side motion. Unit also helps absorb torque to minimize potential for operator injury to arm, wrist, or hand. Mounting to bench top via bolts or bench clamp, torque arm accommodates inline pneumatic and inline electric drivers with max weights of 15 lb and max torques of 110 lbf-in.

Erie Plastics
Westborough, MA 01581
Aug 02, 2007 Available in 26 mm size, Pop N' Shake(TM) closure allows consumers to create their own blended drinks on demand. Ingredients dispense with one turn of tamper-evident dust cover and subsequent pop of inner-cap chamber, allowing consumers to watch flavor, vitamin, or mineral of choice fuse with their preferred bottled drink. PET chamber works with liquid and powder, and moisture/oxygen barrier provides secure separation from active and inactive ingredients.

Innovative Molding
Sebastopol, CA 95472
Jul 27, 2007 Preserving concentric shape of caps via nested stack, 120 Deep Skirt TaperStack(TM) Closure features stacking shelf that enables caps to nest together. Forming stacked logs protects the closures' shape during shipping and warehousing to maintain structural integrity. Tapered edge of caps reduces incidence of cross threading during capping operations, and closures are available with gloss or mat top, smooth sides or ribbed sides, or printed.

IBASE Technology Inc.
Taipei   Taiwan
Jul 27, 2007 Suited for space-constraint embedded applications, Model CMI100-500 supports MB500 AMD Geode LX motherboard with processing speeds up to 600 MHz. It includes 2.5 in. hard drive bay and CF socket that can be removed/installed. Front panel features 2 USB ports and indicators for HDD or power, while rear panel connectors are designed for USB (x2), VGA, LPT, keyboard/mouse, serial port, RJ-45, audio, and dc in. Available in black color coating, unit features metal cover with plastic design.

Stafford Manufacturing Corporation
North Reading, MA 01864-0277
Jul 26, 2007 Suited for designers of medical, pharmaceutical, and scientific instruments or precision equipment, Stafford IQ Shaft Collars feature one-piece construction with radiused outside edges, 32 RMS finish on all surfaces, and self-locking clamping screw. Instruments are precision-balanced for use on high-speed rotating equipment and are offered in electro-polished stainless steel, steel, with hot black oxide finish, and anodized aluminum. Standard sizes range from ¼-6 in. ID.

SKF Motion Technologies
Bethlehem, PA 18017
Jul 18, 2007 Offering plug-and-play solution, electromechanical cylinders (EMC) deliver motion, speed, force, and position needed to enable spot-welding systems to achieve optimum number of welds with reproducible quality. Products integrate into robotic gun assemblies, utilizing technology based on planetary roller screw and servo drive. Available with range of options and accessories, cylinders can be customized to satisfy particular system needs. Compact versions (CEMC) are also available.

Research Plastics, Inc.
Windsor, ON N9H2K8
Jul 12, 2007 Eliminating need for cutting, molding, or removal of excess material, Self-Tooling Tube contains triangle-shaped device that acts as guide for bead. End of tube can be laid right into groove and bead can be directly and accurately applied, with little or no further work on bead once it is finished. Suited for acrylic latex and other latex caulks, tube is also self-burping, which allows contents to be packed so there are no air pockets to interfere with extruding caulk.

Serapid USA, Inc.
Sterling Heights, MI 48314
Jul 11, 2007 Made of reinforced plastic and stainless steel, RigiBelt has 2 belts that come together with zipper-like action to form rigid column. Solution moves quietly while telescoping in and out and is stored in compact magazine. Driven with electric motor, chain can handle loads from 2-1,100 lbf, is entirely mechanical, and comes in stroke lengths up to 6 ft unguided. Product suits any kind of positioning in medical equipment and areas where non-magnetic components are essential.

Norgren
Littleton, CO 80120
Jul 11, 2007 Along with magnetic piston for position sensing, NEN Series features adjustable cushions, low-friction nitrile seals, and Teflon wear band on piston. Viton seals are available, and cylinders come standard with sleeve-nut construction with NFPA MS4 bottom-tapped mounting. For mounting flexibility, add-a-mount option permits changes, additions, and reorientation of NFPA MF1/MF2/MP1/MP2 mounts at point of use.

R & M Energy Systems
Willis, TX 77378
Jul 11, 2007 Eliminating need to remove sucker rods from well site, Era® FAST(TM) features 3-fin stator that remains stationary as field-applied rotor/inner sleeve spins freely inside stator. Outer portion is not bonded to rod, minimizing pressure drop of fluid flowing around guide and torque generated by mechanical and hydraulic friction in rotating rod strings. Loose fit between rotor and stator provides large flow passages to keep debris purged from guide.