Snap-on Industrial
Kenosha, WI 53141 1410
May 16, 2002 Maximum Security tool storage system comes with Remote Patrol electronic security system, which provides keyless entry and motion detector. System features Lock n' Roll drawers with non-slip liners, tubular locking system, and non-directional rubber mat. Top chest has 16,101 cubic in. capacity and measures 21 x 54 1/4 x 24 in. Roll cab has 2 sliding parts trays and one tote tray. It can handle up to 3,600 lbs, and has 22,138 cubic in. of space.

Wireway/Husky Corp.
Denver, NC 28037
May 14, 2002 TUF tubular upright frame, with closed-tube construction, is made from 14 gauge, high-strength steel. Teardrop shape on uprights facilitates installation of variety of beam sizes. Polyurethane paint provides durable finish. It is available in 3 x 3 and 3 x 1 5/8 post sizes, with uprights in standard sizes including 36, 42, and 48 deep and up to 28 high.

Lyon Workspace Products
Aurora, IL 60507
May 03, 2002 Four all-welded, heavy-duty, multi-purpose storage cabinets combine modular drawer, tilt-bin, and shelf storage in lockable cabinet-type housing. Three models measure 60 x 36 1/2 x 60 in., while 1 model measures 39 x 36 l/2 x 75 in. Two other models feature 36 and 48 in. wide shelf storage with diamond perforated doors for ventilation. Two combination cabinets, 48 and 60 in. wide, offer 3 half shelves, center partition, and full width top shelf.

Hi-Tec Equipment Co.
Greensboro, NC 27415
Apr 26, 2002 Drum transport cart holds 10 empty 55 gal steel or plastic drums for organized conveyance around factory floors. It features 2 tiers, upper and lower front stops, and backward decline for loading. For unloading, foot activated mechanism reverses tilt, allowing drums to index forward as they are removed.

ITC Mfg. Inc.
Phoenix, AZ 85009
Apr 19, 2002 Available in power-coated finishes or hot-dip galvanizing, wire decking meets or exceeds ANSI MH-26.2 guidelines, replaces wood or particle board shelving, and provides visibility for inventory inspection, improved air circulation, and clean, sanitary environment. Wire mesh increases water penetration, making overhead sprinklers more effective. Powder coating is environmentally safe alternative to solvent-based paint.

Lista International Corp.
Holliston, MA 01746
Apr 10, 2002 Shelf Converter(TM) Drawer System retrofits into standard industrial shelving. Freestanding system of modular drawers set in wire frame easily inserts into any standard shelf for maximum organization of small parts and tools. Drawers fit securely into pre-assembled, stackable wire frame. Available in three heights up to 26 1/2 in., wire housing rests on any standard shelf and is easily installed. Trim pieces attach to top and bottom of wire frame.

Huot Mfg. Co.
St. Paul, MN 55104-1701
Apr 10, 2002 Rack with transparent cover keeps sharp tools from getting nicked or damaged, provides easy way to keep tools organized and inventoried, and eliminates wasted time hunting for tools. Rack can store 42 5C collets up to 1 in. dia or mix of 5C collets and end mills in 1 1/4 in. and 32 mm sizes. It is made from high impact plastic with black styrene base and measures 9 1/2 x 12 in. Tray fits on any work bench or shelf at workstation, grinding room or tool crib.

Eagle Food Service, An Eagle Group Co.
Clayton, DE 19938
Apr 03, 2002 Fullsize and mini security storage and transport units allow for safe storage of valuable materials, while providing view of contents for security and inventory checks. Fullsize units are available in stationary, mobile and dolly truck models. Add-A-Shelf(R) design allows addition or removal of shelving without disassembling entire security unit. Mini security units are 40 in. high and feature chrome finish and optional shelves.

Penco Products, Inc.
Oaks, PA 19456 0378
Mar 14, 2002 Clipper(R) Shelving System uses company's Clipper Clip, which holds shelving against posts. Clipper Clip allows shelf adjustment on 1 in. vertical centers, and can be repositioned. Front and rear flanges utilize Box Beam construction with flanges welded to underside of shelf on 3 in. centers. Sides are double flanged, and corners are lapped and welded. Shelves are available in medium, heavy duty, and extra heavy duty capacity ranges.

Huot Mfg. Co.
St. Paul, MN 55104-1701
Mar 14, 2002 Rack can be used to store up to 72 R8 collets (up to 3/4 in. in dia) or mix of R8 collets and end mills in 1 in. and 25 mm sizes. Made from high impact plastic with black styrene base, rack includes wire back-rise stand, which tilts rack forward to allow users to see inventory more clearly. It provides stacking system for all English and Metric end-mills from 1 to 14 in. and from 25 to 32 mm, and R8 and RC collets from 3/4 to 1 in.

Crenlo, Inc.
Rochester, MN 55901 2573
Mar 12, 2002 Emcor(R) isoNet has 1/4 in. steel floor plates and top members, and 11 gauge steel uprights, providing sturdy mounts for 19 in. networking and data transmission equipment. Shelves can be single or double, and solid or vented for cooling. Patch cord cables can be organized and routed through horizontal-mounted cabling panel or wide, deep tray. Cable channels can be used to route cables between open frame racks or to join racks side by side.

P & D Solutions Corp.
Louisville, KY 40258 2864
Mar 08, 2002 Prefabricated structures offer compliant storage of gas cylinders and bottles. Conforming with NFPA 55, structures are available in various sizes. Options include ramps and non-flammable separation walls for storing incompatible gases. Units are fully assembled, and can be relocated as needed.

Proper Storage Systems, Inc.
Seguin, TX 78155
Feb 14, 2002 Roll-Out Shelf units are equipped with automatic safety interlocks that lock all other shelves in when one is rolled out. They provide easy accessibility to all items stored. Shelf capacities range from 500 to 40,000 lbs per shelf. Units are ideal for storing dies, molds, printing cylinders and maintenance items.

ITC Mfg. Inc.
Phoenix, AZ 85009
Feb 12, 2002 Light duty wire decking is suitable for storing finished goods, work-in-progress, and work area component parts in manufacturing and warehousing. It fits into standard light duty storage racks and can be used with all boltless, bulk and Z beam styles. Corners hold decking in place for bulk rack units. Decking uses 4 gauge construction, with sandwich wires placed every 12 in. for extra support and rigidity. Powder coat or galvanized finishes are available.

Wireway/Husky Corp.
Denver, NC 28037
Jan 11, 2002 Husky Invincible Storage® Rack Beams are available for light duty and high capacity applications. Beams are available in 2-6 in. heights in nine standard clear span lengths from 48 to 144 in. long. The 2-1/2 and 3 in. beams are suitable for hand loaded rack applications; 6 in. beams handle higher capacity storage requirements. All beam sizes meet RMI standards. Beams are fabricated from high strength steel and have durable polyurethane finish.

Huot Mfg. Co.
St. Paul, MN 55104-1701
Jan 02, 2002 Rack's crystal clear, hard plastic cover protects tooling from nicks and marring while allowing operators to find correct size end mill. It holds up to 108 large end mills: 10 - 5/8 in. pieces, 90 - 3/4 in. pieces, and 8 - 7/8 in. pieces. End mills can be organized by cut size, length, ball end, or other criteria. Rack's footprint of 9 1/2 X 12 in. allows it to fit on work benches or storage shelves at a workstation, grinding room, or tool crib.