Penco Products, Inc.
Oaks, PA 19456 0378
Mar 20, 2003 Clipper® Shelving utilizes Hi-Performance® shelves to maximize load handling capacity. Open-type shelving is suitable for general-purpose use. Closed-type shelving units are covered on 3 sides with steel panels to provide stability, protection, and cleanliness for stored items. Clipper shelving can be ordered with full height, partial, and sliding dividers, as well as bin fronts and label holders. Sliding and swinging doors and modular drawers are available.

ITC Mfg. Inc.
Phoenix, AZ 85009
Mar 13, 2003 Light-duty wire shelving fits securely into standard storage racks and can also be used with boltless, bulk, and Z beam racks. Additional Sandwich wires are placed every 12 in. for additional support. Shelving provides product visibility and allows sprinkler water to flow through shelving and storage racks for OSHA compliance. Standard product comes in nine sizes with speckle gray powder coated finish. Custom sizes and other colors are available.

Frazier Industrial Co.
Long Valley, NJ 07853
Mar 11, 2003 Made from 100% structural steel, Label Beam comes with 9 in. connector that allows 1 in. adjustability. Recessed channel allows warehouse managers to place barcode labels on beam without concern for fork truck damage. It also protects pallet support bolt from damage.

Anthro Corp.
Tualatin, OR 97062 8591
Feb 27, 2003 Offered in 9 model sizes, Rack System is available in 12, 24, and 36 Unit sizes with 24, 30, or 36 in. depths. Floating frame and modular rack-mount angles create hybrid rack configuration by holding equipment of various depths and mounting standards. Equipment can be rack-mounted with screws in tapped rails attached to front and back of rack. Sides, top, and bottom are not part of Rack structure, so when removed allow complete access to equipment.

Global Storage Systems, Inc.
Buffalo, NY 14219
Feb 14, 2003 SureFlo™ incorporates wheeled tracks set in shelf beds to provide wide track wheeled carton flow that emulates simplified site assembly of full width roller system. For installation, roll tracks snap onto extrusion hangers that are slipped over top of rack beams. With twist of adapter, product can be repositioned left or right. Vertical profiling is accomplished in similar manner, with Micro-step Connectors.

JNJ Industries Inc.
Milford, MA 01757
Feb 13, 2003 Quick-Frame accommodates PCBs in various sizes and shapes, and fits into basket or machine that normally holds 29 x 29 in. stencil. Framework features slide blocks located inside aluminum tubular extrusions that slide into any position along frame. Adjustable cross bars accommodate various board widths, and each includes spring-loaded clips that firmly clamp PCB in place. Quick-Frame accommodates stencil foils up to 25 x 25 in.

Proper Storage Systems, Inc.
Seguin, TX 78155
Feb 10, 2003 Product is suited for storing molded plastic sheets, sheet steel, laminate plastic, fixtures, dies, and molds. For operation, users roll out shelves, lower vacuum lift, pick up items, and take them directly to work area. Custom roll-out shelves are available with capacities from 200–40,000 lb per shelf.

EnerSys, Inc.
Reading, PA 19612-4145
Jan 23, 2003 Valve-regulated PowerSafe DDm, for telecommunications, power generation, and UPS applications, has integral racking system. Cells have welded-epoxy, dual-post seals that are 100% water bath tested. Each provides from 200–2000 Ah. Lead-cast terminal posts, with large, threaded, copper inserts, provide maximum conductivity. Steel cans provide uniform compression for transport and installation. Modules come in configurations of 2, 3, 4, and 6 cells wide and up to 8 cells high.

Lista International Corp.
Holliston, MA 01746
Jan 23, 2003 Storage Wall®, available in standard (B251) and shallow depth (B255) models, offers various drawer heights to provide storage for range of items. Modular system provides full extension drawers and roll-out trays for access to stored items. Drawer and tray capacity is rated to 440 lbs each. Span beams, designed for bulk items, hold up to 1,500 lbs and are available with assorted deckings. Unit can also include order/issue counter and 12 in. deep, recessed bookcase.

Anthro Corp.
Tualatin, OR 97062 8591
Jan 15, 2003 Hanging Rack accessory screws into bottom of shelf and puts Rack equipment within reach on workstation. Available in 1, 3, and 9 unit sizes, and made of 11 gauge steel, assembly holds up to 100 lb. Height of 1 Unit Rack is 1.75 in., 3 Unit Rack is 5.25 in., and 9 Unit Rack is 18.25 in., all with width of 22 in. Two Hanging Racks can be used to securely hold extra long rack equipment.

Sho-Rack, Inc.
Elkhart, IN 46517
Jan 08, 2003 Sabre 83 Honor, with one-piece, galvanized cabinet, has elevator shelf with springs and plastic paper holder with Z-Bar. With 12 ga galvanized step-down base, unit offers HD UV-coated .080 window plastic. Magazine Model RR-1, offered with split shelves or divider options, includes built-in trough at front of shelf area to trap moisture and drain it away without damage to publications. Unit, with paper capacity of 16 ½ in., offers ½ in. U-channel display paper holder and spring-loaded door.

Carbis Inc.
Florence, SC 29502 6229
Dec 09, 2002 Custom, pre-engineered units handle pipe diameters up to 12 in., live loads of 30 psf per level, and wind loads of 90–120 mph. T-support racks are suited for lighter loads where space is limited, while bent racks support heavier loads and longer pipe runs. Both types of racks are available in multiple levels, are base plate mounted, and clear heights from 10–20 ft. Custom pipe bridges and service walkways with fall protection are also available.

Hoffman
Anoka, MN 55303 7504
Nov 29, 2002 With load rating of 2,500 lb, DataCom 4-post, open frame racks securely accommodate LAN/WAN equipment, voice/data equipment, routers, servers, and switches. Available with 6, 7, and 8 ft frame heights, 3 models are offered in 38, 45, and 51 rack unit sizes, respectively. EIA RS-330-D standard racks are constructed of extruded aluminum and range in weight from 70–80 lb. Racks are adjustable for depths from 17.7–41.3 in. in 0.98 in. increments.

Proper Storage Systems, Inc.
Seguin, TX 78155
Nov 25, 2002 Full extension shelves with cantilevered mini bridge crane are suited for storing heavy items such as printing cylinders, wave guides, missiles, dies, molds, fixtures, and spare parts. Users roll out shelves, lower crane, pick up needed items, set them on cart, and take items to work area. Custom sizes are available with capacities up to 10,000 lb.

Haewa Corp.
Norcross, GA 30093
Nov 12, 2002 Custom 19 in. cabinets can be designed with single bay, 2-bay, 3-bay, or 4-bay configurations. Racks and consoles have front to back adjustable EIA rails or frame integrated mounting hole patterns. Vertical heights and depths are modified to customer specifications. Structures of cabinets are seismically qualified by Finite Element Analysis that permits computer based simulation and analysis of deformations and stresses on complex frame structures.

Akro-Mils, A Div. Of Myers Industries, Inc.
Akron, OH 44301
Oct 30, 2002 Steel Shelving Systems are made from 22-gauge steel with baked enamel finish and are offered with bin systems. Shelf Bin Systems are 36 in. wide x 75 in. high with depths of 12 and 18 in. Capacity is 350 lbs per shelf. Polypropylene Shelf Bins with hopper fronts are available in depths of 12 and 18 in. and 5 different widths. Pick Racks provide high-density storage with bench-height, free-standing, and mobile styles. Cabinet Systems protect parts and products from dust, damage, and theft.

Cargotainer, Adrian Fabricators, Inc.
Adrian, MI 49221
Oct 09, 2002 Cargo-Shield restraint system prevents accidental load spills from top shelves of pallet racks in storage warehouses. Its wire mesh drop panels are attached to pallet rack frames by means of offset upright post. Panels move up and down, tracking through loop brackets. Its panels lock securely in up position via latch fitting. In up position, panel guards act as barrier, while down position allows stockpickers full access to product stored on upper shelves.

Proper Storage Systems, Inc.
Seguin, TX 78155
Oct 01, 2002 Powered roll-out shelves are designed for storing molds, dies, fixtures, and other heavy, hard to maneuver items. User rolls out shelf, picks up item with overhead crane, and moves it directly into area where needed. Custom sizes are available with capacities up to 40,000 lbs per shelf.

Eagle Foodservice, An Eagle Group Co.
Clayton, DE 19938
Sep 30, 2002 LIFESTOR™ Modular Storage Shelving, designed for materials management applications where sterile requirements are important, features high-density polymer sections combined with Type 304 stainless steel posts and rails. Adjustable and removable intermediate shelf sections are offered in solid or louvered styles. Shelf lengths range from 24 to 60 in., with heights of 63 and 74 in. Standard shelf widths are 18 and 23 in.

Advance Storage Products Div., JCM Industries Inc.
Huntington Beach, CA 92649
Sep 20, 2002 Full support, level-cart pushback system can store pallets that have been damaged, pallets with no bottom boards, 9-legged pallets, and pallets ranging in size from 30 to 72 in. It is available in 4-strut, wire-deck, and diamond-plate models.