Tregaskiss, Ltd.    Oldcastle, ON N0R1L0  Canada
Dec 05, 2012 Designed for guns equipped with QUICK LOAD™ Liners, QUICK LOAD™ Liner AutoLength™ System minimizes wire-feeding problems and burnbacks, as well as premature contact tip failure and wear associated with misalignment between liner and contact tip. Spring-loaded module housed inside power pin applies constant pressure on liner, keeping it seated properly in retaining head or diffuser at all times. Allowing for up to 1 in. forgiveness, system accommodates liner movement during welding.

Nu Flow    San Diego, CA 92121
Jun 25, 2012 Nu Tube Inversion System offers calibration tube and inversion felt of all sizes, thicknesses, and elasticity. Nu Main Pull-in-Place portable steam cure system, designed for 8-12 in. diameter main, comes with cure stations, winch, and steamer as well as full technical support and training.

New Pig Corporation    Tipton, PA 16684 0304
Oct 21, 2011 UN-rated for solid hazardous materials shipments, PIG(TM) Drum Containment Bag provides secondary containment and way to hoist containers on and off truck for field-to-shop mobility. Puncture-resistant, PVC-coated shell clips shut to keep rainwater out, while abrasion-resistant bottom enables bag to be dragged across gravel and other rough surfaces. Removable poly liner contains leaks and drips inside of bag and can be cleaned and re-used.

Baker Hughes, Inc. (BHI)    Houston, TX 77210
Oct 13, 2011 Installed and released prior to cement job, TORXS(TM) Expandable Liner Hanger System eliminates risk of running tools becoming fixed in place during cementing, requiring fishing or well abandonment. System enables seamless 1-trip, 2-stage hanger and packer setting for cemented liner applications. Advanced torsion capability allows casing to be worked to depth in challenging zones, and there is no need to add retarders that compromise cement formulation or extend cement pumping time.

GOAD COMPANY    Ellisville, MO 63021
Jun 29, 2011 Constructed using N-FUZE® Lining Technology, GOAD Tank Linings feature molded corner inserts and infused machine welds that eliminate gaps from hand welds. Products utilize Koroseal® flexible PVC sheets, RF-welded panels, and TANKeye® leak detection system, which locates leaks electronically without draining tank. Linings can be used on virtually any type of containment, tank, or pit with coatings such as Belzona®, Ceilcote®, Epoxies, Fiberglass, Flakeline®, Heresite®, Plasite®, and rubber.

Interstate Products, Inc.    Sarasota, FL 34233
Jun 02, 2011 Featuring portable design, XR-5 Series Rapid Entry Ready Berms are made from 30 mm XR5 fabric, which is rated for 2,000 revolutions of truck tire without showing wear. Exit and entry walls have edges that lay almost flat on ground, allowing vehicles to drive in and out freely without lowering walls first. Edges automatically rise with level of any spill. Heavy-duty reinforced chemical-resistant fabrics trap fuel, oil, acids, gasoline, hydrocarbons, and broad range of chemicals.

Magnet Paints    Amityville, NY 11701
May 13, 2011 Installed at up to 40 dry mils thick, MONSTALINER(TM) goes down in 2 thick coats. Two-component catalyzed coating has 8-hr pot life, which eliminates risk of spoiled material. As product is rolled, texture is pulled up from coating and cures with orange peel bumpiness without using crumb tire rubber. MONSTALINER(TM) is also 100% UV permanent and carries 5 Year Guarantee against fading, chalking, or discoloration due to sunlight. Once installed, coating requires little or no maintenance.

Tingue Brown & Co.    Saddle Brook, NJ 07663
Apr 06, 2011 Waterproof and washable Elastoliner create sanitary barrier inside laundry carts, trucks, baskets, and hampers to prevent cross-contamination from soiled laundry during transit or storage. Also suited for protecting clean linens from contamination due to contact with interiors, these custom-sized cart liners are manufactured from 100% nylon in choice of 200 or heavy-duty 430 Denier with internal elastic cord for gripping rim and maintain shape.

Grayling Industries, Inc    Alpharetta, GA 30004
Apr 05, 2011 Designed to protect product from contamination or spoilage during shipping and storage, Guardian(TM) Liners are form fit to match interior dimensions of corrugated containers, eliminating folds and creases that can trap product and lead to short filling and/or excessive residual waste after dispensing. Liners are pre-attached to cassette, which helps to ensure proper alignment in container prior to filling and minimizes need for attendant to adjust liner during filling process.

VICI Metronics, Inc.    Santa Clara, CA 95051
Dec 21, 2010 Helping meet EPA method 8081A requirements, Injection Port Liner reduces breakdown of Endrin and DDT during injections while also increasing interval between liner changes. Application of crosslinked siloxane over conventionally deactivated liner results in injection port liner that contributes less to breakdown than any other component of injection system. Liner may be used in VICI injectors as well as other model injector brands, such as Agilent/Finnigan, Gerstel, and Varian.

Sherwin-Williams Co. c/o Ultimate Lead Systems    Berea, OH 44017
Dec 17, 2010 Suited for tank linings and piping under insulation, Cor-Cote® HT FF contains micaceous iron oxide for anti-corrosion and edge protective properties. Epoxy novolac amine is resistant up to 450°F in dry service environment and will perform in areas subject to wet/dry cycling up to 300°F. Available in 3 shades of gray, product can be applied to steel, stainless steel, or concrete and is designed for service with gasoline, fuel oil, diesel fuel, crude oil, ethanol, and other hydrocarbons.

Tregaskiss, Ltd.    Oldcastle, ON N0R1L0  Canada
Jul 22, 2010 Available in lengths up to 15 ft for robotic applications and 25 ft for semi-automatic MIG guns, 2-piece QUICK LOAD(TM) Liners include 3 sizes for .030, 1/16-5/64, and .078-3/32 in. wires. Welding operator installs retainer in power pin on first use. During subsequent liner replacements, liner feeds through front of MIG gun - which can remain attached to wire feeder during liner replacement. Welding operator needs only to remove front-end consumables and slide liner over wire.

Northstar Polymers    Minneapolis, MN 55406
Jul 14, 2010 Designed to prolong life of equipment used in bulk material handling operations, such as aggregate handling, mining, and concrete handling, Rhino Hyde Spray 8500AR is spray-applied to virtually any thickness and creates seamless membrane that eliminates corrosion. Product is applied with 2-component high-pressure impingement mixing spray machine and is suitable for screen deck grids, slurry tanks, weigh hoppers, and chute liners.

Grayling Industries, Inc    Alpharetta, GA 30004
Feb 25, 2010 Guardian(TM) form fit drum liners are constructed of either 4 or 8 mil engineered polyethylene for strength and durability. Formed on custom-designed heat sealing equipment by attaching circular polyethylene disc to cylindrical polyethylene body, shaped liner reduces pleats/folds that trap material and hinder complete filling and dispensing. Product allows for drum reuse/recycling and can package liquid or dry materials in open top metal, fiber, or plastic drums.

Tregaskiss, Ltd.    Oldcastle, ON N0R1L0  Canada
Dec 10, 2009 Available for semi-automatic and robotic MIG guns, QUICK LOAD(TM) Liners minimize downtime for MIG gun liner installation and also facilitate regular/routine maintenance. Each liner, made of high carbon steel, consists of 2-piece system with retainer that installs in power pin on first use. Offered in lengths to 25 ft for semi-automatic MIG guns and 15 ft for robotic applications, products accommodate wire diameters from .035-1/16 in.

BASF Corp.    Wyandotte, MI 48192
Aug 17, 2009 Designed for weathering protection of soil and rock, polymer-based thin spray-on liner MEYCO TSL 865 bonds to concrete, rock, and coal, providing surface reinforcement and ground stabilization for variety of underground applications. Product acts as moisture barrier, prevents passage of radon and methane gases, and also has high capacity to resist fire. Liner can also be used for rock reinforcement in preliminary slope protection, and for protection against hard rock strain bursting.

Nu Flow    San Diego, CA 92121
Jun 17, 2009 Offered as no-dig alternative, Pipes Down Under uses trenchless, non-destructive process for repairing swimming pool pipes and does not require demolishing of hardscape and landscape around pools. Thermoplastic pipe is inserted into existing 1½-4 in. pool pipes to bridge gaps, stopping leaks, and keep chlorinated water contained. Nominally, it takes 2 people ~2 hr to completely restore pool pipes without draining pool or special training/equipment.

Cartanna International Sales Inc.    Delta, BC V4M1A1
Apr 28, 2009 Eco-Moss features 100% oxo-biodegradable plastic liner that degrades without leaving any residue, methane, or fragments. This flexible basket/container liner uses only natural dyes and highly absorbent, natural, reclaimed fibers. Additionally, all packaging is recycled and 100% biodegradable. Solution also offers water retention, with plastic liner being perforated to allow drainage, and is also suited for use in drought conditions.

Pres-On Products, Inc.    Addison, IL 60101
Mar 04, 2009 Cap liner types include foam polyethylene, S105 and S70 foil seal, pressure seal, pulp and foil seal, as well as lift and peel with built-in tabs. While standard cap sizes range from 20-120 mm, additional custom diameters, shapes, and substrates are available. Design is compatible with existing packaging machinery, including induction sealers, and sealing characteristics provide barrier to air and moisture for range of products.

Abresist Corp.    Urbana, IN 46990-0038
Feb 16, 2009 Used in areas prone to combined abrasion and impact, KERAFLEX systems feature ALRESIST® high alumina ceramics or KALMETALL®W hard overlay welding plates vulcanized to steel base. Standard panels come in sizes up to 20 in.² with welded studs or countersunk bolts. ALRESIST-based KERAFLEX-KRM offers ½ or 1 in. tile thickness, while KERAFLEX-WRM consists of KALMETALL-W hard overlay welded plates, rubber, and steel. KERAFLEX-KR features 1/8-½ in. thick ALRESIST tile and rubber backing only.