Opex Corp.    Moorestown, NJ 08057-4215
Feb 06, 2013 Perfect Pick™ goods-to-person picking solution features one-touch design based on iBOT™ intelligent, wireless vehicle, which has 100% access to inventory in single aisle. Traveling around inside storage rack at rates of up to 1,000 dual-cycles per hour, iBOTs pick and stock inventory simultaneously and deliver totes or trays directly to picking station located at one or both ends of aisle. Scalable in both size and speed, redundant system has no single point of failure.

Roll-A-Way Conveyors, Inc.    Gurnee, IL 60031 1212
Feb 05, 2013 Built to specification to meet material handling needs, Roll-A-Way Transfer Cart is equipped with operator safety stop to prevent items from falling off conveyor table while in transit. Stop is controlled upwards and downwards via stop lever, which is located near operator handle end of truck, allowing for material items to be released from conveyor table into next phase of production or area of inspection.

ASG, Div. of Jergens, Inc.    Cleveland, OH 44110
Feb 05, 2013 Measuring 6.5 x 6.8 x 11 in. for placement on any workbench or assembly station, 9.04 lb LDX-130 increases productivity by automatically dispensing .169–5.1 in. labels while removing and discarding .169–5.1 in. wide backing material. Unit offers 10 feeding speed settings, built-in counter, and length adjustment programming. Requiring 110/220 V, 3 W power, dispenser accommodates 9.8 in. max label roll diameter and supports label lengths from .169–31.5 in.

Air Technical Industries    Mentor, OH 44060
Feb 05, 2013 Featuring battery operated design and max height up to 20 ft, Compact RBC Reversible Boom Crane has Triple Section Telescopic Boom that allows for reaching deep into, under, or above hard-to-reach places. Self propulsion offers infinitely variable speed control from 0–4 mph with smooth acceleration/deceleration. All crane functions are hydraulically operated, including optional hydraulic winch cable lift that can reach below floor levels into man holes, pits, basements, or lower levels.

Payson Casters, Inc.    Gurnee, IL 60031 1212
Feb 05, 2013 Available in 2 basic configurations of either rigid or static design as well as swivel or rotating configuration, KP 900 Series can handle up to 30,000 lb in static design and 18,000 lb in swivel design. Dual wheel differential action facilitates turning as wheels turn in opposite directions when in motion. Casters come in custom colors as well as standard powder coated blue or gray.  

Oil-Rite Corporation    Manitowoc, WI 54221 1207
Feb 05, 2013 Able to distribute oil to as few as 12 and as many as hundreds of points, Hydracision® combines hydraulic movement of fluid with positive displacement injection. System provides frequent, small doses of lubricant, allowing oil to reach critical areas when needed with little or no run-off or waste. Self-contained package consists of clear polycarbonate fluid reservoir, in standard 2 L size, that contains gear pump, motor, PLC, and low level sensor.

Doosan Machinery USA Inc.    Sterling Heights, MI 48310
Feb 04, 2013 Designed to meet iT4 regulations, 172 hp Model DL250-3 is engineered with breakout force of 27,120 lb, full-turn tipping capacity of 20,680 lb, and dump height of 9 ft, 2 in. High-lift configuration extends dump height to 10 ft, 8 in. Six cylinder, 360 in.³ diesel engine features high-pressure common-rail design with direct fuel injection, electronic control, and 4 valves per cylinder. For optimal performance in dirty and dusty conditions, loader incorporates automatic-reversing cooling fan.

Bridgestone Engineered Products Co.    Nashville, TN 37214 0993
Feb 04, 2013 Made with AD2 technology, Radial All Traction Row Crop Tires are specifically designed to meet unique needs of crop protection and fertilizer applicators. IF- and VF- designations can carry more load at same pressure or same load at lower pressure, resulting in minimized soil compaction. Rated up to 40 mph, tires have wide tread bars for optimized distribution of ground pressure from bar face and curved bar design for smooth ride.

Presto Lifts, Inc.    Attleboro, MA 02703
Feb 01, 2013 Without electrical power, P3™ All-Around level loader minimizes injury-inducing bending, lifting, reaching, and stretching common to pallet loading applications. Pneumatic airbag automatically lowers or raises pallet as boxes are added or removed, maintaining top layer at convenient height. While base size lets user step close to platform, turntable ring or optional solid turntable platform at top of unit lets user spin load. Loader accommodates 400–4,500 lb, depending on spring package.

Fillmore Container, Inc.    Lancaster, PA 17601
Feb 01, 2013 Comprised of 2 trays, each JarBOX provides safe storage and transport for canning jars, candles, as well as other glass or fragile items. U.S.-manufactured container can be used as 2 one-piece trays, or those trays can be snapped together. Each tray is made of recycled material, measures 20 x 14 ¾ x 3 ¾ in., and holds 12 quart or smaller jars. Sturdy and stable, container also features built-in locater rings that allow shift-free stacking.

Elliott Equipment Co.    Omaha, NE 68127
Feb 01, 2013 Along with 45 USt capacity, 45127R BoomTruck features design that allows for 50-state federal bridge legal mounting configuration on 5 axles. Steel, 5-section boom (34 ft. 5 in. retracted to 127 ft extended) has sheave height of 137 ft; optional 2-piece, 32–55 ft telescopic jib is available. Other selectable boom lengths are 105 and 142 ft. Lifting is powered via 2-speed hydraulic planetary winch with 9,060 lb single line pull, 15,000 lb bare drum pull, and rotation-resistant wire rope.

Genevieve Swiss Industries, Inc.    Westfield, MA 01085
Jan 31, 2013 Designed to direct mount to any ER 16 collet holder using standard ER nuts, Ti-Loc SwissClamp Slitting and Milling Tool Holders extend micro endmills closer to workpiece and eliminate inaccuracies caused by tolerance stacking. Typical TIR is held to .0002 in. or better. Arbors are available for 5 mm, 8 mm, ¼ in., and 5/16 in. ID saws, and Micro Endmills Extensions will be available to hold 3 mm, 4 mm, 1/8 in., and 3/16 in. shanks. Installation requires twist and snap into any ER clamping nut.

Meese Orbitron Dunne Co.    Ashtabula, OH 44004
Jan 31, 2013 Bulk linen truck, 72S, features optional one-piece, rotomolded lid; door shuts tightly, opens easily, and remains safely in opened position as needed. Fitting flush into sides of cutout instead of lying over exterior, lockable lid and door help prevent contained laundry from absorbing water and spreading contaminants while also promoting accessibility. Rotationally molded polyethylene cart comes set atop MOD poly base and industrial-strength casters and carries up to 1,000 lb payloads.

Conveyor Handling Company    Elkridge, MD 21075
Jan 31, 2013 Hytrol ProSort 400 sorters handle high-speed applications where product diverting needs to be positive and gentle. Used where speeds up to 700 fpm are required and close divert centers are not critical, ProSort 421 sorts products at 22° angle. ProSort 431, used to sort products at 30° angle where close divert centers are required, can achieve speeds to 350 fpm. ProSort Elite series is offered as single-sided, positively diverting from left- or right-hand sides.

Yale Materials Handling Corp.    Greenville, NC 27834
Jan 29, 2013 In addition to fully adjustable electronic power steering, Yale® MO25 features automatic speed reduction in cornering and suspended platform with operator sensing floor mat. Control handle minimizes arm movement needed to change directions, helping to reduce fatigue and allowing operator to remain inside truck footprint for protection. With top mounted design, electro-mechanical disc brakes facilitate maintenance and inspection.

Magnetic Products, Inc.    Highland, MI 48357
Jan 29, 2013 Combining holding power of rare earth magnet with reach-out of ceramic magnet, Hybrid Power Booster Magnets provide product protection and tramp metal control. Hybrid magnet material is available integrated in plate magnets, magnetic chutes, free-flow magnets, drum separators, and suspended magnets.

Miller Electric Mfg. Co.    Appleton, WI 54912 1079
Jan 28, 2013 Intended for welding in heavy-duty field applications, SuitCase® X-TREME™ 12VS integrates drive motor assembly, motor control, and tachometer that provide electronic wire feed speed control and accuracy. Wire delivery system facilitates wire loading and minimizes resistance to help ensure consistent performance in MIG and Flux-Cored welding. Wire speed dual schedule feature is also included, and visual scale on wire pressure knob lets welders dial in tension setting.

Power Pusher    Shakopee, MN 55379
Jan 28, 2013 Enabling one person to move 500–250,000 lb loads, dual-motor Super Power Pusher™ provides alternative to forklifts, tractors, and other ride-on material handling equipment. Fingertip controls and compact size lend to maneuverability, while fully programmable control system adjusts speed and acceleration/deceleration based on current load and environment to adapt to individual application requirements. Optional safety features include audible motion beeper, strobe, horn, and hand guards.

Quest International    Irvine, CA 92718
Jan 28, 2013 Featuring 32 in. medical-grade LCD, AlphaView® Battery-Powered Mobile Video Cart operates for up to 8 hr between charges. Model AVC2F4P-CART is equipped with foot pedal controlled, height-adjustable mounting column; 76.8 Ah lithium-ion battery pack; and 60 GHz HD video receiver and transmitter, allowing wireless reception up to 10 m from video source. With 1,920 x 1,080 resolution, display produces artifact-free HD images with over 2 million pixels and 1,300:1 contrast ratio.

Toyota Material Handling U.S.A., Inc.    Irvine, CA 92623-7419
Jan 28, 2013 Tonero diesel counterbalanced trucks, offering 1.5–3.5 ton lifting capacities, utilize 36 kW 1DZIII diesel engine that complies with 97/68/EC emissions regulations (Stage IIIa). To lower fuel consumption and CO2 emissions, engine's injection pump is optimized for efficient regulation of fuel used in combustion process. Truck is designed and manufactured for 99% recyclability at end-of-life in Toyota's ISO 14001-certified plant in Ancenis, France.