Balancing Machines

Machinery & Machining Tools, Transportation Industry Products

Tire Changer-Wheel Balancer Package includes wheel weight kit.

January 22, 2015

In addition to Deluxe Wheel Weight Kit, Combo Package comprises PWB1530 Wheel Balancer and PWC2710 Tire Changer. Motorized 110 V/60 Hz digital wheel balancer, capable of balancing steel and aluminum wheels, offers dynamic and static modes, laser light for weight placement, and self-calibration. Featuring all plastic duck head for use when working with fragile, high end wheels, Tire Changer includes rubber padded mount/demount tool, air filter/quick drain water trap, and no flex turntable. Read More

Machinery & Machining Tools, Electronic Components & Devices

Supercapacitor Balancing Kit suits validation and prototyping.

August 4, 2014

Complementing KEMET S301 Supercapacitor, Supercapacitor Development Balancing Kit includes 2-stage active balancing circuit to ensure that voltage across each supercapacitor cell is approximately equal. Kit features high frequency capacitance retention, energy deliver capabilities, overvoltage protection, and RoHS compliance. Each contains enough balancing cards, bus bars, screws, washers, and wire to assemble six S301 60 mm diameter cells. Read More

Machinery & Machining Tools, Services

Dynamic Shop Balancing improves system, equipment helth.

April 4, 2014

Dynamic shop balancing services, used as part of preventative maintenance strategy, improves overall system health while also extending life of bearings, rotors, and other rotating equipment. Technical staff use computer-controlled IRD B50 balancing stand, which is capable of precision balancing rotating equipment up to 5,000 lb, and services are in accordance with ISO 1940/1 and applicable API standards. Read More

Material Handling & Storage, Machinery & Machining Tools

Manipulators balance random weights automatically.

April 3, 2014

With pneumatic AutoBalance feature, Manipulators automatically balance unknown weights as they lift them. Load is gripped and operator pulls up on manipulator's handlebars. Balance point rises until load lifts off floor and AutoBalance memorizes weight. From that point on, operator can let go of handlebars and pull load itself up and down in balanced state. Feature is useful when lifting same shape part in factory, but where there are 2 or more weights, or where weight varies randomly. Read More

Machinery & Machining Tools

Turbocharger Overhaul Machines improve balancing quality.

November 6, 2012

TB series improves balancing quality, efficiency, and profitability in overhaul of turbochargers. In first step, individual components and pre-assembled rotor assembly are balanced on TBcomfort. Complete core assembly (CHRA) is then balanced on TBsonio. Both machines fully comply with requirements of Machinery Directive 2006/42/EC and are equipped with Computer Aided Balancing (CAB) measuring instrumentation, which offers simplified software design and touchscreen operation. Read More

Machinery & Machining Tools

Ergonomic Balancers help reduce operator fatigue.

June 23, 2010

Built to accommodate tighter work spaces, Aero-Motive® Compact AB Balancer lets workers move suspended tools or objects with minimal effort. Products are rated for tool weight range of 1-11 lb, eliminate pick-up and lay-down wear, and prevent tool damage without requiring electrical or mechanical power. Comprised of 3 standard and 3 enhanced models with on/off ratchet lock to hold tool in desired position, series features heavy-duty adjustable spring that ensures variable tension. Read More

Machinery & Machining Tools

Balancing Machine offers automatic mill correction.

November 17, 2009

Featuring 2.2 x 2.4 x 1.3 m footprint, self-contained V100S Vertical Axis Balancing Machine provides 99.65% unbalance reduction ratio and is capable of handling any component weighing up to 100 kg that requires correction of unbalance by milling. Milling head delivers 300 Nm cutting torque, accommodates axial through radial positions, and cuts arc angles up to 180°. Capable of balancing in 1 or 2 planes, machine utilizes 10 in. air chuck with 2.5 micron repeatability. Read More

Machinery & Machining Tools

Balancing Accessories compensate for imbalanced tool assemblies.

October 6, 2009

Balance Rings work with standard boring bar components for diameters up to .394 in. and attach at front end of boring head. For diameters up to 2.125 in., Radial Adjustable Holders keep boring head cartridge and boring bar close to center position while adjustable insert holder is used for coarse diameter adjustment. Both are designed for 112 Series EWN precision boring heads and allow compensation for imbalance in tool assemblies for entire range. Read More

Machinery & Machining Tools, Green & Clean

Balancer/Analyzer is designed for wind industry.

August 28, 2009

VIBXPERT Balancer and Analyzer addresses challenges of wind turbines, which turn at very slow rotational speeds. With its built-in wind balancing program, software, accelerometers linear to 0.1 Hz, speed sensor, and balance grade tolerance chart (G16), portable system is suitable for use in situations of mass unbalance of wind turbine rotor blades. Read More

Machinery & Machining Tools

Automated Balancing Machines are servo-controlled.

April 24, 2009

Automated balancing machines that incorporate servo control capabilities facilitate access to set-up and data for each job while also enabling changeover of parts with one button touch. This allows shorter production runs of different components to be carried out on one machine. Changeover time on KISS-234 automatic propshaft balancer can take as little as 5-10 min, while times are reduced to around 15 sec on semi-automatic vertical models. Read More

Test & Measuring Instruments, Machinery & Machining Tools

Balancer utilizes phase-reference laser tachometer.

October 7, 2008

Offered as single-plane or two-plane balancing system, Model BAL-2000(TM) portable, USB-powered balancing system can be used with Windows desktop and laptop computers. Unit's phase-reference laser tachometer has programmable gain for optimizing performance in any environment, while visual readout shows signal level and phase tracking using analog waveform. Balancer is powered from USB port of laptop and uses any ICP®-compatible accelerometers. Read More

Machinery & Machining Tools, Sensors, Monitors & Transducers

Application Acceleration Switches balance server loads.

July 30, 2007

Designed for enterprise datacenters and server farms, AX Series 2000 and AX Series 2100 accelerate and optimize all applications - voice, video, and data - during normal and peak usage conditions. AX Series 2000 has 2 CPUs, 2 GB memory, 8 GB over copper ports, 2 GB SFP fiber ports, and 80 GB HDD, while AX 2100 has 4 CPUs, 2 GB memory, 8 GB over copper ports, 4 GB SFP fiber ports, and dual 80 GB RAID 1 HDDs, Both utilize Advanced Core Operating System. Read More

Machinery & Machining Tools

Balancing Rings benefit machining processes.

April 26, 2007

REGO-FIX® balancing rings system enables standard toolholders to be upgraded to balanceable systems at any time. Without use of tools or weighted balls, it can balance toolholder and assembly up to 42,000 rpm at any G-rating. Uninhibited design lets rings rotate full 360° for infinitely adjustable weight distribution. Compatible with most balancing machines, rings are suited for operators seeking extended tool and spindle bearing life as well as optimal surface finish and chip load. Read More

Machinery & Machining Tools

Balancing Machine offers lightweight Swiss precision.

November 10, 2006

REGO-FIX® BMT 200 balancing machine utilizes soft bearing technology spindle design that measures vibrations caused by imbalance and also permits different calibration for each tool set-up. Weighing less than 90 lb, machine allows balancing of most toolholder taper styles and sizes. Standard balancing methods are offered, including gram, angular, drilling radial, drilling axial, milling, and fixed positioning. Read More

Computer Hardware & Peripherals, Machinery & Machining Tools

Load Balancing Appliance supports 1,000 real servers.

August 8, 2006

LoadMaster 2500 offers users Gigabit server load balancing and Layer 7 content switching appliance with 1,000 TPS SSL (Secure Socket Layer encryption) acceleration capability. Featuring 99.999% availability with stateful failover to hot standby, this ITM (Internet Traffic Management) appliance intelligently distributes Web traffic among Web servers with throughput over 350 Mbps. It enables up to 50,000 concurrent Layer 7 sessions and 1 million Layer 4 sessions. Read More

Machinery & Machining Tools, Sensors, Monitors & Transducers

Monitoring Systems provide balancing and process control.

March 15, 2005

Comprising computer control, sensor, spindle mounting adapter, and balancing head, SBS System attaches to grinding machines with wheels from 150-1,220 mm dia. It achieves results to within 0.02 microns at speeds from 300-30,000 rev/min. Acoustic Emission Monitoring System consists of acoustic sensor and slot-in PCB card for SM-4500 control unit. It eliminates gap time in CNC machining cycles, monitors condition of cutting tools, and reports contact between components within 1 ms. Read More

Machinery & Machining Tools

Tool Balancers offer load capacities from 1-396 lb.

February 14, 2005

Spring operated tool balancers are available for bench or assembly line jobs. Features include rugged aluminum alloy housing, stainless steel cable, cable guide, stroke limiter, and safety device to prevent load from dropping due to spring breakage. Auxiliary safety suspension is standard. Applications range from small pneumatic screwdrivers to industrial portable spot welding guns. Insulated rotation device is offered for resistance welding or electrical tool applications. Read More

Material Handling & Storage, Machinery & Machining Tools

Balancing Equipment facilitates high-speed machining.

December 10, 2004

Balancing Equipment, available with 1- or 2-plane measuring capabilities, has setup software that identifies location of unbalance on toolholder. It allows for balancing methods including balancing rings, or basic drilling for metal removal. Unit comes with standard clam ping spindle, in CT 40, CT 50, HSK 40 or HSK 63 Forms A through F. Equipment is designed for use with ThermoLock® Shrink Fit toolholders, and MicroMax(TM) and VersaMax(TM) boring heads. Read More

Machinery & Machining Tools

Balancing Machine is designed for toolholder systems.

September 16, 2004

Requiring 110 V power connection and 87 psi compressed air for operation, ACURO Plus can balance one complete system, consisting of toolholder and tool, within seconds in one or 2 planes. Adapter system with automatic clamping provides pulling forces equal to actual machine spindle. Balancing operations of toolholders with max weight to 33 lb and length to 13 ½ in. can be done at speeds of 300-1.100 rpm. Dimensional balance accuracy is less than 1 g mm. Read More

Machinery & Machining Tools

Small Parts Balancer offers repeatability to ± 0.0001 oz in.

January 10, 2003

Eliminator-10 balances family of small parts including turbine components, impellers, armatures, pulleys, dampners and blowers, with capacity up to 10 lb. Parts are dynamically balanced using hard cradle suspension and underslung belt drive, ensuring permanent calibration. Software displays amount of unbalance and angle of unbalance. Single plane and 2 plane capability is standard. Read More