Prexion, Inc    San Mateo, CA 94402
May 20, 2013 With 11 x 7 cm field of view, Eclipse 3D Cone Beam Computed Tomography Dental Scanner highlights 2-in-1 and 3-in-1 multi-functionality, featuring dedicated 2D Digital Panoramic and Cephalometric options as well as maintaining CBCT 3D diagnostic clarity. Wide Mode features enable clinician to capture full upper and lower dental arches, including entire third molar region. Scanner is suitable for dental offices that perform in-office surgical implant procedures as well as 3D imaging for diagnosis.

Stratasys, Inc.    Minneapolis, MN 55344 2020
May 16, 2013 Available for Objet EdenV 3D Printers, VeroDentPlus MED690 enables 3D printing of accurate dental models that offer appearance of dental stone with fine details and resolution. Material can be used in conjunction with all open intra-oral impression and plaster scanners and is optimized for printing models for crowns, bridges, orthodontic appliances, and implants. For optimal detail, Objet EdenV 3D Printers produce ultrafine 16 micron layers.

Stryker Corp.    Kalamazoo, MI 49002
Mar 18, 2013 Universal SMARTLock™ Hybrid MMF system combines strength and rigidity of arch bars with safety and efficiency of MMF screws to enhance standard of care for maxillomandibular fixation (MMF) techniques. To optimize posterior fixation and vector control, there are 9 potential points of fixation along plate. Self-drilling, locking technology of screws allows for purchase into both bone and plate for additional stability and also eliminates need for interdental wiring required with arch bars.

Sescoi USA    Southfield, MI 48075
Feb 28, 2013 Designed for milling dental components, WorkNC Dental includes features such as multi-threading, parallel processing, and batch processing, which accelerate calculations. Customized templates and part setups allow maximum parts per block/puck of material to be milled, while CAM milling algorithms minimize run times on milling machine. WorkNC Dental Implant Module enables automatic detection of implant styles, which can also be directly read in from dental scanner and CAD system.

Den-Mat Corporation    Santa Maria, CA 93455
Feb 11, 2013 With internal battery, SOL™ Soft Tissue Laser allows clinician to move between operatories for over 3 hr without plugging in cord. Fiber spool cord management ensures unwanted lengths never interfere with procedures, while blue aiming beam contrasts with tissue to optimize visibility. To minimize hand fatigue, ergonomic handpiece provides optimal posterior access in multiple positions. Applications range from gingival contouring and tissue retraction to laser-assisted periodontal therapy.

Lumitex, Inc    Strongsville, OH 44136
Sep 20, 2011 Featuring straight horizontal profile and extended tip, Mini VersaLight(TM) facilitates insertion in minimally invasive incisions found in spine, hip, shoulder, plastic/maxillofacial, and oral surgery. Unit provides uniform, shadowless light, as well as irrigation, aspiration, and retraction capabilities. Ergonomically designed for comfort in any hand position, Mini VersaLight attaches to standard hospital OR tubing to provide sterile irrigation from standard infusion pump.

Planmeca Oy    HELSINKI 00880  Finland
Mar 28, 2011 Combining 3D imaging, digital panoramic, digital cephalometric, and 3D photo in one system, Planmeca ProMax 3D Mid supports volume sizes from 34 x 42 mm to 16 x 16 cm, which allows optimizing imaging area according to specific task. Standard panoramic imaging program exposes only teeth area, minimizing patient dose. Optionally, temporomandibular joints can be imaged with program in which TMJ imaging angles can be adjusted.

Datron Dynamics, Inc.    Milford, NH 03055
Oct 08, 2010 DATRON D5 Dental Mill features 5-axis automation system that holds up to 8 material blanks and loads and unloads blanks for unattended operation. Cast iron machine has 7 dynamic servo drives, horizontally-mounted industrial spindle, lubrication system, and dust collection. Also included is 13-station tool changer with tool-length and tool-break sensors. All functions are controlled via Apple iPad and system's control software interfaces with all standard scanning systems and CAD/CAM packages.

Kaeser Compressors, Inc.    Fredericksburg, VA 22404
Sep 28, 2010 Intended for dental practices, clinics, and laboratories, Airbox Dental models deliver 250-900 Lpm, 5 motor power ratings from 2.4-7.5 kW, and 2 package sizes. Dry-running, directly coupled KCT reciprocating compressor is powered by eff 1-rated drive motor, and airflow design allows 100% duty cycles and dependable operation in ambient temperatures up to 45°C. As turnkey, all-in-one solution, Airbox Center Dental also provides application-tailored compressed air treatment and storage.

Timken Co., The    Canton, OH 44706 0932
Jul 15, 2010 Employing stainless steel rings and Grade 3 balls, Dental Precision Bearings are designed to resist wear in harsh sterilization environments while optimizing stability and lubricant flow. Ceramic ball upgrades offer greater wear resistance and smoother operation than steel balls. By upgrading bearing from single to dual shields, re-lubrication can be eliminated during expected bearing life. Dental bearings meet or exceed multiple ISO P4 and ABEC 7 precision tolerances.

Roland DGA Corporation    Irvine, CA 92618
Jul 06, 2010 Designed for creating copings, crowns, and bridges in zirconia and wax, DWX-30 features integrated clamping system and virtual panel. Three types of clamps are included, one for discs and 2 for blocks, while integrated dust collection system removes debris and keeps machine and lab environment clean. Using DWX-30, materials can be cut on top, bottom, and at ±20° for complex geometry. Unit also includes tool sensor for automated machine and tool setup.

A‑dec    Newberg, OR 97132
Mar 13, 2009 Offering complete solution, A-dec 300 includes patient chair, delivery system, light, monitor, and assistant's instrumentation. System also incorporates compact control head that supports 2 electric micro-motors, integrated floor box, base plate, and dedicated left/right support center. Thin 1 in. backrest provides optimal access to oral cavity, while 13.5-29.5 in. vertical range allows doctors of all heights to sustain posture and position arms at sides.

STEUTE Meditech, Inc.    Ridgefield, CT 06877
Feb 06, 2009 Compatible with range of medical equipment, customized multi-function foot-operated controls are functionally and ergonomically optimized. These CE-compliant and multifunctional units, designed to meet IEC 60601 and European Medical Devices Directive (93/42/EEC), are available with optional design features such as custom housings/colors, rocker/pushbutton/joystick/footmouse(TM) actuators, special markings, analog/digital outputs, special connectors, protective shields, and IP X8 ratings.

STEUTE Meditech, Inc.    Ridgefield, CT 06877
Feb 05, 2009 Constructed of aluminum, CE-compliant Series RF-MED permits operation in any position around perimeter and offers mechanical life rating in excess of 1 million operations. Optional design features include reed contact or microswitch contact closures, custom colors, special markings, customer selected cable, and AP and IP X8 ratings. Designed to meet stringent safety standards, control is suited for x-ray equipment, ultrasonic systems, positioning tables, and dental systems.

STEUTE Meditech, Inc.    Ridgefield, CT 06877
Feb 05, 2009 Designed to control up to 14 electric/pneumatic functions, Foot-Operated Controls meet all relevant Medical Standards and Directives including IEC 60601, European Medical Device Directive 93/42/EEC, and UL and CSA requirements. Optional design features include wireless/cabled operation, custom colors, special markings/icons, analog/digital control functions, compatible connectors, protective brace/foot rest, and up to IP X8 ratings.

Delcam Plc    Birmingham Hampshir B10 0HJ  United Kingdom
Jan 09, 2009 Used with any combination of scanner, machining software, and computer-controlled machine tool, DentCAD helps creation of dental restorations, including copings, crowns and bridge frameworks. It includes visualization tools, such as sectioning, shading, and transparency options that allow detailed inspection of shape being developed. Using series of Wizards, software guides user through entire design process, and allows for different design options to be developed and compared.

Man & Machine Inc.    Landover, MD 20785
Dec 09, 2008 Able to be rinsed and submerged in water, U Hot Keyboard is sealed to protect it against contaminants such as blood, saliva, food, drink, and most cleaning agents. It features drainage holes in each key pocket, which let excess water or spilled fluids exit before causing damage. Recharged via USB cable connected to computer, wireless device works for days without needing recharging.

HOYA ConBio(TM)    Fremont,, CA 94538
Oct 10, 2008 Available as replacement for DioDent, DioDent II, and LVIlase soft tissue dental lasers, flexible fiber helps eliminate fracturing and facilitates pocket maintenance. Bendable tips enable posterior access, while nick and fleck cleaving speeds fiber preparation and assures flat fiber tip. By locking fiber in place securely, handpiece prevents fiber from pulling out or pushing in. Fingertip jacket stripping eliminates need for tools.

Belmont Metals, Inc.    Brooklyn, NY 11207
Jun 04, 2008 Flexible with regards to formulas and quantities, pure metals and alloys can be provided in custom shapes and sizes to meet casting, plating, brazing, soldering, and other application requirements. In addition to standard nickel shapes, service deals with powders and shapes for Dipolarized Ni Anodes, Ni Cathodes, Low Melting Foundry Shot, as well as Ni-Copper and Cupro Nickel in standard and special compositions. Monel® (Nickel-Copper alloy) and Nickel-Silver are also available.

Safe Life Corp    San Diego, CA 92130
Jan 31, 2007 Implanted with Triosyn® resin filter layer, Safe Life Respirator ensures safety and continuity of business services in event of pandemics, bioterrorism, and environmental disasters. Resin enhances capture performance by increasing surface area of each filter fiber, while molecular makeup of resin expresses electrochemical charge that pulls microorganisms out of airflow. Models T-3000(TM) and T-5000(TM) are certified P95 by NIOSH.