CONCOA
Virginia Beach, VA 23454
Aug 16, 2005 Designed for 600 Series switchover/623 delivery systems, Series 629 is made of 9 in. brass bar stock with 24–72 in. Teflon or stainless lined hoses. Configured as gas manifold with ½ in. ID flow path, system facilitates flow from liquid cans or high-pressure cylinders to pressure control device. Configured as vent manifold, it provides headspace equalization for multiple liquid cylinders. Manifold has four ¼ in. female NPT, one ½ in. female inlet, and ½ in. male NPT outlet.

Mykrolis Corp.
Billerica, MA 01821
Jul 21, 2005 Designed for low-flow point-of-use CMP applications, Solaris® DVP Dual Transducer Manifold uses disposable methods of reducing defect-causing particles, gels, and agglomerates while simultaneously allowing critical working particles to pass through and reach wafer. It offers clean, safe filter changeout in seconds without use of tools and integrates upstream and downstream pressure transducers for online monitoring of system and filter pressure drop to protect CMP slurries.

Springer co-ax Inc.
Penndel, PA 19047
Jun 30, 2005 Suited for fluid and gas piping systems, co-ax® Modular Manifolds allow combination of multiple valves into single flow control system. Valves of different sizes, flow rates, and functions can be combined to enable distribution of process fluid or gas to multiple points, with each valve module connected to common inlet manifold. Separation plates make it possible to use same manifold to control return of fluid, or to control multiple fluids or gases simultaneously.

AW-Company
Franksville, WI 53126
Jun 21, 2005 To replace outdated mechanical flow meters in paint mix rooms, Flow Meter and Manifold System adapts to current paint recirculation and transfer systems. Unit, constructed of 316 stainless steel, features JVM-60CG flow meter, RT-Ex2 battery-powered digital display, and ¼ in. NPT adapter for pressure gage. Unit also comes with 3 full port ball valves with complete bypass system and tri-clamp connections with Teflon o-rings.

AW-Company
Franksville, WI 53126
Jun 09, 2005 Stainless steel Model JVM-60CG with RT-Ex display and manifold is designed to replace outdated mechanical flow meters used in paint mix rooms. With optional 4–20 mA upgrade, all flow rate information is relayed to PLC for monitoring of possible no flow or high flow conditions. Manifold has 3 full port ball valves, tri-clamp connectors with Teflon O-rings, and threaded port for pressure gauge.

CPI Inc.
Knoxville, TN 37922
May 24, 2005 Grand Slam Manifold™ manages separate flow requirements of plumbing applications such as hot water distribution, water pressure stability, and water distribution. Utilizing Push 'N Go™ quick-connect technology with integral quarter turn valves and PEX piping, product supports in-field customization and facilitates installation. Infinitely variable, add-on modular platform can be reconfigured, repaired, or changed in field.

Swagelok Company
Solon, OH 44139-3492
May 23, 2005 Constructed of 316 stainless steel, compact unit features angled vent valve that facilitates actuation, even when 2-valve manifold is panel-mounted. Non-rotating, hardened needle design minimizes seal wear, protects seat from galling, and promotes leak-tight shutoff. Cold-rolled stem threads, isolated from system media, are protected from dirt and dust by stainless steel shroud. Unit handles pressures to 6,000 psig @ 200°F.

Upchurch Scientific, Inc.
Oak Harbor, WA 98277
Apr 22, 2005 Featuring ¼–28 flat-bottom ports, manifolds are available in models for 1/16 and 1/8 in. OD tubing. Used with included Super Flangeless™ fittings, 1/16 in. OD version will withstand up to 5,000 psi and 1/8 in. OD version will withstand up to 1,000 psi. Units are suited for splitting flow streams in 8 directions, such as infusion onto 96-well plate.

Leonard Valve Co.
Cranston, RI 02910
Mar 29, 2005 Models TM-420, TM-520, TM-820, TM-920, TM-1520A, and TM-2020A adjust to varying flow requirements for tempered water in industrial facilities. They feature DURA-trol® solid bimetal elements, integral supply checkstops, wall supports, cast lever handles, and locked temperature regulators. Products are offered from ¾ in. inlet with 1 in. outlet and flow rates from 1.0–35 gpm to 2 in. inlet with 2 in. outlet and flow rates from 1.0–190 gpm.

Armstrong International, Inc.
Three Rivers, MI 49093
Feb 22, 2005 For effective valving and piping arrangement for condensate return systems, Condensate Collection Assembly consists of trap valve stations (TVS) and manifolds in pre-assembled system. Options include removable insulation package including nipples, drain valve, and strand.

Proportion-Air, Inc.
McCordsville, IN 46055
Dec 20, 2004 Up to 4 Model QB3 electronic pressure regulators can be mounted to manifold, which offers common supply and exhaust port with individual controlled outlet ports to minimize plumbing. Model QB3 is capable of controlling pressure or vacuum electronically by accepting command signal of either 0-10 V or 4-20 mA. Pneumatic output is linear to command input.

Lighthouse Worldwide Solutions
Medford, OR 97501
Nov 26, 2004 MiniManifold™ consists of manifold sequencing system with built-in controller and miniblower for purge flow. It allows single particle counter to monitor up to 6 locations simultaneously. Controller communicates with particle counter and can interface to computer or process tool via RS-485/MODBUS communications protocol. MiniManifold™ offers user-programmable sampling and includes built-in buffer to store data records.

Mead Fluid Dynamics, Inc.
Chicago, IL 60641-1902
Oct 15, 2004 With all components encapsulated in ½-shell thermoplastic valve body, Isonic® MOD3+ series incorporates internal wiring and built-in PCB connector. Snap-on installation enables electrical and pneumatic connections to be made simultaneously, without tools. Design accommodates 3- and 4-way single and double solenoid valves, as well as direct acting valves on same manifold in expandable control base. System is chemical, heat, and impact resistant.

Swagelok Company
Solon, OH 44139-3492
Aug 09, 2004 Kenmac Series slimline process monoflange assemblies replace multi-valve assemblies with single manifold. Block, block-and-bleed, and double block-and-bleed units are available. User can choose from bolted bonnet, outside screw and yoke bolted bonnet, and integral screwed needle valve assemblies. Two-valve isolating and venting gauge block monoflange is available for instrumentation applications. All are rated to pressures of 150–2,500 lb class according to ANSI B16.5.

Swagelok Company
Solon, OH 44139-3492
Jun 24, 2004 Swagelok® J6 series distribution manifold controls multiple outlets from single source inlet. Manifold assemblies range from 4–18 needle valve/outlet connections, and valves can be individually isolated for precise control. Single-piece, integral body, rated up to 6,000 psig working pressure, delivers strength in a lightweight design. Used in gas or liquid applications, compact manifold is designed with minimal potential leak points.

Norgren
Littleton, CO 80120
May 25, 2004 Suited for deployment in systems that require gang mounting of solenoid valves, KIP manifold assemblies can integrate system components such as pressure switches, check valves, regulators, and gauges into one package. Maintenance or replacement of valves is accomplished by unplugging valve, and user does not need to disconnect pneumatic plumbing. Manufactured in materials such as brass, aluminum, and PVC, manifolds are available different port sizes.

TLV Corporation
Charlotte, NC 28273
Mar 30, 2004 VSDM and VCCM steam distribution and condensate collection manifolds employ designs that minimize installation area and adapt to plant requirements. Compact products reduce backpressure and prevent destructive 2-phase flow into condensate return piping with full 1 in. siphon construction. ASME code certified to 200 psig, products are available in trap sizes to 1 in. with NPT or SW connections.

Acme Cryogenics, Inc.
Allentown, PA 18103
Oct 15, 2003 EZ Block Carbon Dioxide and Nitrous Oxide Fill Manifolds, made of one-piece machined brass barstock, offer alternative to traditional pipe header configurations. Modular design facilitates set-up, reconfiguration, and expansion for changing needs. EZ Blocks can be connected together using flexhose or pipe nipple. Accessories include wall mount bracket and floor stand.

Parker Hannifin Corp.
Cleveland, OH 44124
Sep 09, 2003 Pro-Bloc one-piece, double-block-and-bleed manifolds are machined from single steel forging. Body styles include flange connection to process piping on one end and NPT thread connection for instrument on other end, or flange-to-flange design. Primary isolation function is provided by Hi-Pro ball valve, which works on floating ball principle and offers 100% bubble tight operation. Manifold is stainless steel, carbon steel, or duplex, and meets ANSI class 2500 pressure ratings.

Acme Cryogenics, Inc.
Allentown, PA 18103
Jun 18, 2003 Acme Model S7000L Automatic Liquid Cylinder Gas Changeover Manifold eliminates system downtime by ensuring uninterrupted gas flow from 2 banks of cryogenic liquid cylinders. Gas Saver Circuit prevents accumulated gas from being discharged and wasted. Automatic switchover feature ensures continuous gas service, while single-knob control speeds cylinder changeout.