Lee Company, The
Westbrook, CT 06498 0424
Jul 28, 2009 Available with 1-, 2-, 3-, and 4-place standard manifolds, Lee VHS Injection Manifold Mount System allows for precise injection of fluid into flow stream. Any ported VHS micro-dispense valve can be mounted so that outlet port is in close proximity to flow stream, minimizing captive capillary volume and increasing injected volume. To allow for future expansion and design flexibility, boss plugs are available to seal any unused valve ports in manifold.

Parker Hannifin Corp., Pneumatic Div.
Richland, MI 49083 0901
Feb 24, 2009 Available with all valves, fittings, and mufflers, Isys Micro manifold is designed using back-to-back valve mounting style with 42 mm wide manifold that holds 4 valves and offers 0.35 Cv flow. It is Fieldbus-ready for centralized/decentralized applications and offers Preferred Connectivity to Rockwell Logix(TM) Architecture. With Isysnet Fieldbus, product can provide full 256 I/O capacity. It handles up to 4 Valve Driver modules, controlling 32 valves each, coupled to one fieldbus node.

Lee Company, The
Westbrook, CT 06498 0424
Oct 30, 2008 Featuring captive capillary volume of 0.5 µL, Injection Manifold Mount System enables precise injection of fluid into flow stream. Any ported VHS micro-dispense solenoid valve can be mounted so that outlet port is in close proximity to flow stream, ensuring minimal captive capillary volume and increased injected volume repeatability. Available in 1, 2, 3, and 4-place standard configurations, system suits laboratory, biomedical, and chemistry applications.

Clippard Instrument Laboratory, Inc.
Cincinnati, OH 45239
May 09, 2008 Electronic Oxygen Clean series is available with single- and multi-station manifolds, which offer single- or double-sided mounting in oxygen-compatible electroless nickel-plated brass material and feature 1/8 in. NPT input ports as well as No. 10-32 outlets. Consuming 0.67 W, pneumatic Oxygen series has response time of 5-10 msec and ratings of 6, 12, or 24 Vdc. Available in 1-12 station versions, manifolds facilitate grouping of valves, fittings, or other pneumatic components.

Humphrey Products
Kalamazoo, MI 49003
Apr 01, 2008 Available in 2, 4, 6, 8, or 12 station lengths, 410M Series accommodates 310/410 Series inline pneumatic valves. Units contain one common media supply port, one common vent/exhaust port, and isolator plugs that permit isolation of galleys for separation of pressure, media, or exhaust. Other accessories include manifold station block-off plates, separate air supply plate, electrical sockets, valve mounting kit, DIN rail clips, and separate 12-station control board.

Clippard Instrument Laboratory, Inc.
Cincinnati, OH 45239
Dec 14, 2007 Constructed of aluminum, in-line manifolds are designed with bottom T-slot that allows for accelerated and secure installation. Products are available in 4-, 6-, 8- or 10-station versions. Design provides access for grouping valves, fittings, or other pneumatic components.

Sauer-Danfoss
Ames, IA 50010
Sep 26, 2007 Designed to fit LSHT motors, Hydraulic Integrated Circuits provide commonly needed functions, including counterbalance, cross-port relief, bypass solenoid, and dual shock valve with anti-cavitation. Off-the-shelf HICs are appropriate for swing drives, winch drives, and slew drives, as well as vehicle propulsion, auger drives, conveyor drives, and on/off fan applications. All units are endurance tested to NFPA standards.

Parker Hannifin Corp., IPD Instrumentation Group
Huntsville, AL 35805
Sep 11, 2007 Featuring 3/8 in. bore, Hi-Pro integrates 2 ball valves for isolation and 1 needle valve for venting. Unit is supplied with MPI tubing ends that operate using compression sealing technique and are inherently vibration resistant. End connections are secured by means of Tru-Loc mechanism to guard against connector movement when disconnecting connectors or instrument. Valves are integrated within 316 SS one-piece body, minimizing potential leak paths.

SMC Corporation Of America
Indianapolis, IN 46226
Jul 18, 2007 Combining valve, PCB, base, and fittings, Series VV061- CUBE Manifold can be used to operate small bore cylinders or as pilot valve for air-operated valves. It comes in 4- and 8-station configurations with barb fitting to accept 4 mm OD tubing or with 2 mm one-touch fitting. With voltage options of 24 and 12 Vdc, Series V060 valve offers response time of 10 ms and consumes 0.55 W in standard configuration and 0.23 W with power saving circuit.

Parker Hannifin Corp., Instrumentation Products Div. - UK
Cleveland, OH 44124
Jun 08, 2007 Available in double-block-and-bleed configurations, Instrumentation Manifolds come in either monoflange or low-profile flange-ended forms. Both feature integrated construction that minimizes potential number of leak paths. Ball and needle valve designs used in manifolds meet highest A classification level specified by ISO 15848 over temperature range of -29 to +180°C. With flange sizes from ½-3 in., manifolds are offered in numerous valve/flow path configurations.

Scott Specialty Gases
Plumsteadville, PA 18949 0310
Apr 18, 2007 Designed to control gas delivery from 2 independent banks of high-pressure cylinders, Model 8404E ensures continuous, uninterrupted supply of gas without manually resetting levers or valves. Integrated circuit electronically monitors and displays cylinder bank pressure as well as delivery of pressure. Available with brass or stainless steel regulators, programmable unit allows delivery pressure to be set from 10-225 psig, with max flow rate of 1,200 scfh.

Bosch Rexroth Corp., Pneumatics Div.
Lexington, KY 40511
Mar 02, 2007 Suited for AS-i serial link applications, 2-station Series CA44 valves are offered with manifold choices with or without digital inputs and with or without auxiliary power. Design simultaneously makes both electrical and pneumatic connections when plugging valve into place. Valve stations can be 4-way, 2-position valves; dual 3-way, 2-position valves; or blanking plate. Service life is over 100 million cycles, and flow is 0.2 Cv, with pressure range of 29-116 psi.

Parker Hannifin Corp.
Oxford, MI 48371
Feb 06, 2007 Integrated Accumulator Manifold (IAM) design integrates piston-type accumulator directly into aluminum manifold, making manifold itself an accumulator. Approach effectively incorporates accumulator, pilot circuit, and switching valve circuit into compact, fully integrated unit. IAM design can accommodate up to 1,000 psi operating pressure and features up to 20 cu in. displacement. It is suited for use on front-end loaders, backhoes, skid steers, aerial and man lifts.

Ross, Charles, & Son Co.
Hauppauge, NY 11788 0615
Nov 29, 2006 With SS surface and mirror finish on interior wetted components, SLIM (solids-liquid injection manifold) system uses vacuum force at intake area to suck in powders or liquids for immediate emulsification/dispersion. Mounted on casters, system includes 1¾ gal funnel for powder charging, along with sanitary connections, double mechanical seal, and seal barrier system. Applications include fumed silica, calcium carbonate, titanium dioxide, thickeners, and pigments.

Festo Corp.
Hauppauge, NY 11788
Aug 03, 2006 Featuring plug and work® design, CPX I/O System consists of modular, IP65 valve manifolds with Ethernet/IP, Modbus TCP, and standard IT protocols. Embedded controller enables decentralized or stand-alone control. Complete diagnostics, via LED, network, or handheld, provide error detection. Featuring up to 32 solenoids, VTSA manifold offers flow rate up to 1,000 l/min per valve, while MPA manifold features up to 128 solenoids and flow rate of 700 l/min per valve.

FilterSense
Beverly, MA 01915
Jun 05, 2006 ValvePAC(TM) provides intelligent pulse jet filter cleaning as well as valve diagnostics for reducing pulse jet baghouse and cartridge style dust collector maintenance. Operating as standalone device or networked to B-PAC(TM) control systems for overall performance analysis and optimized control, ValvePACs are available in modular packages to handle small filters with 16 rows or less and large multi-compartment fabric filters with 240 rows or more.

Parker Fluid Control Div.
New Britain, CT 06051-4107
Apr 07, 2006 Supplied with ready-to-install fittings, direct-acting manifold contains 2-way, NC valves with common inlet port and individual outlet ports. Metering options permit chemical dispensing or slow closure of valves to remove water hammer effects within water lines. Available in brass and 303 stainless steel, manifold is manufactured with ¼ in. NPT connections and offers 120/60 Class F IP67 AC DIN coil. Assemblies are available with 2, 3, 4, or 6 stations.

Smith Equipment
Watertown, SD 57201-5636
Mar 24, 2006 Available for 15, 40, or 125 psi outlet pressures, Gas Manifold and Automatic Changeover Regulator System features chrome-plated 2.5 in. gauges that enable visual inspection of cylinder bank and outlet pressures. Nickel-plated changeover regulator includes 2 inlet, 1 interstage, and 1 outlet pressure gauge. Pigtail assemblies made of SS and Teflon are offered in 24 and 72 in. lengths, and manifold header bars feature brazed joints for leak-proof connections.

Eastern Plastics, Inc.
Bristol, CT 06010
Feb 22, 2006 Resistant to corrosion and heat in aggressive chemistry applications, custom-made Perfluoroalkoxy manifolds are constructed of translucent material that combines properties of PTFE and FEP and permits viewing of fluidic channel. Multi-layer design utilizes bonding process that allows internal fluid paths which minimize connections and solution volumes while eliminating leak points. Manifolds can include SMT valves, pumps, sensors, fittings, and other components.

Festo Corp.
Hauppauge, NY 11788
Oct 31, 2005 Offering range of pneumatic connections, VTSA (Type 44) allows plug-in sub-base style valves to be added or removed as required; singlar sub-base for mounting individual valve is also available. Sub-bases are available in G or NPT ports, and terminal box, multipin, and fieldbus electrical interfaces can drive 32 solenoids. Along with 24 Vdc and 100 Vac coil voltage options, system lets user combine larger valves on single manifold without transition plate.