Other

Fluid & Gas Flow Equipment

Arrestor Kits negate effects of water hammer.

May 12, 2016

Designed for facilitated installation, Water Hammer Arrestor Kits include everything needed to address effects of water hammer – pressure surge or wave caused when fluid in motion is forced to stop or change directions suddenly. Kit components include stainless steel water hammer arrestor, tee, elbow, nipples, union, and Teflon® tape. Available for ¾, 1, 1 ½, and 2 in. pipe sizes, kits are recommended for those using quick closing solenoid valves. Read More

Controls & Controllers, Fluid & Gas Flow Equipment, Machinery & Machining Tools, Material Handling & Storage

Solis Accumulator Delivers Stored Material to Converting Line

January 8, 2016

Double E Company utilizes advanced Siemens drive and motion control system to maintain integrated tension and material movement during roll changes, without the need for a separate PLC Double E Company LLC (Bridgewater, Massachusetts) supplies a wide range of solutions for web handling, as well as accessories for the paper, film and foil web converting and packaging industries. In addition to...Read More

Fluid & Gas Flow Equipment, Mechanical Components & Assemblies, Mechanical Power Transmission

BorgWarner Delivers Advanced Technologies for New GM 8-Speed Transmission

September 25, 2015

BorgWarner's Hydraulic Accumulator, Eco-Launch™ Solenoid Valve and Multi-Segment Wet Friction Plates Contribute to Improved Shift Feel and Fuel Economy AUBURN HILLS, Mich.,– BorgWarner supplies Eco-Launch™ stop/start accumulator technology and multi-segment wet friction plates for the new 8-speed rear-wheel drive automatic transmission (8L45) from General Motors. To enable the...Read More

Fluid & Gas Flow Equipment, Machinery & Machining Tools, Textile Industry Products

Vertical Accumulator improves productivity in Web processes.

May 29, 2015

Able to fill at high speeds, even when down-line process has been stopped, SplicePerfect™ GACC Vertical Accumulator allows for core changes and product splicing while process line continues at constant velocity. Once rewind operation resumes, this festoon style vertical accumulator feeds out at speeds exceeding process line speed until all accumulated material has been paid out. System is custom designed to meet application requirements of continuous web processes.
Read More

Fluid & Gas Flow Equipment

OSC-16.200

May 27, 2015

Andrew Coors became CEO of Steelhead Composites by way of 9th Street Investments, where he was involved in funding Lightning Hybrids in 2012. The Loveland-based maker of hydraulic hybrid systems for trucks and buses had a supply-chain headache, says Coors. "Doing due diligence on Lightning, we became concerned about their supply chain," he explains. The component in question was hydraulic...Read More

Fluid & Gas Flow Equipment, Mounting & Attaching Products, Sensors, Monitors & Transducers, Test & Measuring Instruments

Freudenberg-NOK Simrit Offers Sealing Technologies Developed to Handle Stresses of Aggressive Environments

March 10, 2014

Showcases power generation and transmission sealing technologies at IFPE 2014 LAS VEGAS - Whether pushing to develop a "million mile" seal for power generation applications or a 20,000-hour solution for industrial gear box use, Freudenberg-NOK Sealing Technologies Simrit systems engineers and technology managers are on the forefront of solving today's most pressing industry challenges. The...Read More

Fluid & Gas Flow Equipment, Mechanical Power Transmission, Mounting & Attaching Products

Freudenberg-NOK Simrit Offers Sealing Technologies Developed to Handle Stresses of Aggressive Environments

March 5, 2014

Showcases power generation and transmission sealing technologies at IFPE 2014 LAS VEGAS – Whether pushing to develop a "million mile" seal for power generation applications or a 20,000-hour solution for industrial gear box use, Freudenberg-NOK Sealing Technologies Simrit systems engineers and technology managers are on the forefront of solving today's most pressing industry challenges. ...Read More

Controls & Controllers, Fluid & Gas Flow Equipment, Machinery & Machining Tools

Drilling Technical Services Develops Die Cut Thin Film Blank Accumulator with Siemens Motion Control

February 14, 2013

VR Series "cut and stack" accumulator utilizes leading-edge motion control products to efficiently transfer film blanks from point of cutting to positioning in counted stack As a machine builder specializing in the design, engineering and system integration of narrow and mid-web label solutions as well as flexible packaging and folding carton machinery, Drilling Technical Services (DTS) of...Read More

Fluid & Gas Flow Equipment, HVAC, Machinery & Machining Tools

Royal Products to Feature New Live Centers and Albrecht berchuck at IMTS 2012

July 3, 2012

Hauppauge, NY - Royal Products has announced that they will present a suite of five innovative "Standard Special" Live Centers at IMTS (Booth W1622). These new, standard configurations have been designed to accommodate approximately 90% of what were previously considered custom-only application requirements-offering immediate availability and standard center pricing. Each design incorporates...Read More

Fluid & Gas Flow Equipment, Material Handling & Storage

Parts Accumulator features 100 lb capacity.

August 22, 2011

Measuring 28 in. in diameter, Econo-Rack(TM) continuously spins at 1 rpm in either clockwise or counter-clockwise direction. Unit features adjustable deflector that effectively moves parts towards center of turntable. Available in 3 heights to cover wide range of conveyor exit locations, Econo-Rack is suitable for Swiss-type applications. Read More

Fluid & Gas Flow Equipment

New Metal Bellows Accumulators

June 15, 2011

Ormond Beach, FL USA - BellowsTech, LLC has published a new product page focused on metal bellows accumulators. Used to store the energy of a liquid or gas, bellows accumulators using edge welded bellows can be manufactured in smaller sizes with added stroke length capability. Edge welded bellows are comprised of nested rippled diaphragms, so they are capable of completely compressing onto...Read More

Fluid & Gas Flow Equipment

Parker Increases Piston Accumulator Pressure Ratings up to 30,000 psi; 160+ Gallon Capacities to Meet 10,000-Ft. Deep Sea Drilling Requirements

June 18, 2010

ROCKFORD, Ill. - Parker Hannifin Corporation, the global leader in motion and control technologies, announces the capability to provide high-pressure piston accumulators for the oil and gas market. With working pressure ratings up to 30,000 psi and capacities of 160+ gallons, Parker accumulators meet the tough demands of deep, subsea oil and gas applications, including blowout prevention systems...Read More

Fluid & Gas Flow Equipment

Tara Technologies Selected By Honeywell Aerospace to Supply A350 XWB Accumulator

January 15, 2009

Tara Technologies Corporation, headquartered in Daytona, FL, has been awarded a contract by Honeywell Aerospace to design and manufacture the accumulator employed in the A350 XWB Supplemental Cooling System. Utilizing Tara Technologies' edge-welded bellows, the accumulator will accommodate expansion and contraction of coolant used to control temperature in the A350 XWB. Scheduled to enter into...Read More

Fluid & Gas Flow Equipment

Parker Increases Piston Accumulator Bore Size Range to Support Large High Pressure Applications

July 23, 2008

ROCKFORD, IL - To meet growing market requirements for large accumulators with excellent power density energy and very fast response time, Parker, the global leader in motion and control technologies, now has the capability to produce hydro-pneumatic piston accumulators with a 25-inch inside diameter (ID) bore. Large bore piston accumulators have increasing application in large power plant...Read More

Fluid & Gas Flow Equipment, HVAC

Oil Mist Accumulator has no moving parts.

June 27, 2008

Using expanded metal mesh in cone shape to catch excessive effluent and reduce amount of mist in air stream that reaches the collector, In-line Oil Mist Accumulator catches oils, coolants, and water mists from high-speed machine tools and parts washers. It fits into duct system directly, and has 2-piece construction that allows for easy disassembly and cleaning. Accumulator operates in vertical position, draining collected material back into machine sump. Read More

Fluid & Gas Flow Equipment, Material Handling & Storage, Packaging Equipment, Software

tna Rethinks the Conventional with Six New Technologies Unveiling at Interpack

February 14, 2008

Dusseldorf, Germany Trade Fair Center, 24-30 April 2008 DUSSELDORF, GERMANY - (24-30 April 2008) - tna, a leading supplier of turn-key, integrated packaging and processing solutions for food production companies worldwide, debuts a series of six technical advancements for the confectionery, fresh produce, and the delicate baked and salty snack industries, that will make production more...Read More

Fluid & Gas Flow Equipment

Parker Large Capacity Accumulators Help Cameron Subsea Meet Demands of 12,000 ft. Ocean Depths

October 24, 2007

ROCKFORD, IL - September 5, 2007 - Purchase of eighty, 80-gallon stainless steel piston accumulators by Cameron for use on their industry-leading subsea blowout preventer units (BOPs) is announced by Parker, the global leader in motion and control technologies. Parker is supplying 80-gallon piston accumulators specifically designed and built in special grade stainless steel to meet the...Read More

Fluid & Gas Flow Equipment

Hands-on Demonstration of up to 80% Weight Savings Possible with New Composite Accumulator Technology that Helps Increase Offshore Drilling Rig Payloads to Be Featured at OTC.07, Parker Hannifin Booth 4317

April 25, 2007

ROCKFORD, IL - March 13, 2007 - A special hands-on demonstration of the significant weight savings that can be achieved with its new lightweight carbon fiber composite hydraulic accumulators will be featured by Parker Hannifin's Hydraulic Accumulator Division at OTC .07, Booth 4317. This technology can eliminate up to 80 percent of the weight of traditional steel accumulators used on Blow Out...Read More

Fluid & Gas Flow Equipment, Machinery & Machining Tools, Material Handling & Storage

Royal Introduces New Rota-Rack Rotary Parts Accumulator

March 14, 2007

Royal Products introduced a new patent-pending Rota-Rack Rotary Parts Accumulator at IMTS '06. The Royal Rota-Rack offers a lean, cost-effective method for safely collecting finished parts as they come off of a CNC lathe, providing true unmanned production. Features include: o A unique rotary spiral that safely directs parts to the center of the turntable o A low-friction UHMW material...Read More

Fluid & Gas Flow Equipment, Mounting & Attaching Products, Welding Equipment & Supplies

Feeders, Indexers, and Accumulators are plug and play.

March 15, 2002

Glidepath(TM) system of assembly line feeders, indexers, and accumulators are suitable for automated introduction of components for industrial assembly processes. Systems include fall-away stop coupled to Sure Start nudger, which pushes conveyed unit on downstroke of stop without additional controls, thus eliminating additional operator intervention. Read More