Hose, Pipe, Tubing & Fittings

Fluid & Gas Flow Equipment, Mechanical Components & Assemblies, Waste Handling Equipment

Floor Drain Seal eliminates odors and pests.

August 2, 2013

Designed to fit 2, 3, and 4 in. floor drains, Green Drain features 2 silicone flaps that create seal, preventing insects and hazardous sewer gases from entering while also keeping water backflow at bay so floors stay dry and clean. Chemical-free solution can go in any drain and is suitable for use in kitchens, basements, labs, restrooms, industrial drains, water heaters, laundry rooms, and even showers. Read More

Fluid & Gas Flow Equipment

Parker Hoses Provide Extreme Flexibility Without Reducing Flow

July 31, 2013

Ravenna, OH -- Parker Hannifin, the global leader in motion and control technologies, is exhibiting their extremely flexible polyurethane hoses at Pack Expo 2013. 83FR DuraGard is a non-conductive, weld spatter resistant polyurethane hose, often used in robotic assembly applications. Ultralite Superbraid polyurethane air hose is 29% lighter than equivalent thermoplastic air hoses and 63%... Read More

Fluid & Gas Flow Equipment

Saudi Aramco Awards Fine Tubes with Best-In-Class Supplier Approval

July 22, 2013

Fine Tubes is proud to announce its latest approval from Aramco Overseas Company for the supply of Nickel alloy, Stainless Steel and Titanium tubing. This approval recognises the high-quality standards, exceptional service levels and solid delivery performance Fine Tubes provides, defining the tube manufacturer as a 'best-in-class' supplier. Aramco Overseas Company (AOC) works with approved... Read More

Fluid & Gas Flow Equipment, Materials & Material Processing

Viega's Zero Lead(TM) Alloy Exceeds Lead-Free Requirements

July 16, 2013

Viega is the only manufacturer that has developed its own registered, lead-free silicon-bronze alloy specifically for press fittings. WICHITA, Kan. -- Viega Zero Lead™ bronze alloy fittings provide durable, quality press connections, while exceeding the state and federal lead-free regulations. The Viega Zero Lead fittings are certified to NSF/ANSI Standard 61, Annex G, which requires a... Read More

Fluid & Gas Flow Equipment

Industrial Dock Hose combines performance and flexibility.

July 16, 2013

Suited for use within oil and gas industries, Boa™ Industrial Dock Hose is manufactured and designed for medium- to high-pressure applications. Constructed of oil-resistant rubber coupled with nylon cord and embedded helix steel wire, materials combine to promote performance as well as kink resistance and flexibility, which fosters extended service life and weather resistance. Built-in 150 lb ANSI flanges provide complete assembly for end-user requirements. Read More

Fluid & Gas Flow Equipment

Ideal Offers IDEAL-TRIDON® Brand Non-Perforated Hose Clamps

July 15, 2013

Popular Throughout Europe, Non-Perf Clamps Being Relaunched in U.S. SMYRNA, Tennessee — Ideal Clamp Products, Inc., leading designer and manufacturer of IDEAL-TRIDON brand worm gear, hose and specialty clamps announced the relaunch of non-perforated hose clamps to the U.S. market. "Non-perforated hose clamps feature a smooth interior band and a wider cross saddle that is best suited to... Read More

Fluid & Gas Flow Equipment

Inert Gas Connector minimizes media waste.

July 9, 2013

Compatible with residual pressure valves, G580 RPV helps protect integrity of gas cylinder content without requiring residual media to be purged or evacuated and tank to be cleaned prior to filling. Featuring bail handle roller actuator, connector locks securely in place through forward motion of handle, eliminating hand twisting, wrenching, and taping to achieve sufficient seal. Stainless steel handle with through bolt prevents failures and maximizes operator safety at pressures up to 3,600 psi. Read More

Fluid & Gas Flow Equipment

TPR Tubing can be used in clean and industrial applications.

July 9, 2013

Combining flexibility, durability, and formability, Suprene thermoplastic rubber (TPR) tubing exhibits resistance to flex fatigue and tearing and withstands temperatures from -60 to +275°F. FDA grade is available in 64A and 80A hardnesses, has natural tan color, and is suited for most clean needs, such as food and beverage or pharmaceuticals. Available in 64A durometer, black-colored industrial grade offers resistance to UV radiation, ozone, and other chemicals and works well outdoors. Read More

Electrical Equipment & Systems, Fluid & Gas Flow Equipment

Oceaneering Announces Umbilical Contract for the ExxonMobil Julia Project

July 5, 2013

HOUSTON - Oceaneering International, Inc. (NYSE:OII) announced that it has secured a contract with Exxon Mobil Corporation (NYSE:XOM) to supply a production control umbilical for its Julia field development located in the Gulf of Mexico Walker Ridge block. The order is for an electro-hydraulic, steel tube umbilical approximately 14 miles (22.5 kilometers) in length.  Product manufacturing... Read More

Fluid & Gas Flow Equipment

Specialized Connection Solutions for the Unique Demands of the Defense Industry

July 5, 2013

Stäubli Connectors to exhibit advanced connection solutions at GVSETS DUNCAN, SC – Technology has the potential to solve innumerable challenges faced by military personnel and first responders. At the Fifth Annual Ground Vehicle Systems Engineering and Technology Symposium (GVSETS), taking place August 20-22 in Troy, Michigan, these technologies and the minds behind them will be in the... Read More

Fluid & Gas Flow Equipment

Pneumatic Tubing comes in UV-stabilized and PTFE variants.

July 3, 2013

Made from 100% virgin raw materials, NITRA tubing features Shore A 98 hardness. Ether-based tubing exhibits resistance to hydrolysis, oil, and cold. Suited for outdoor applications, NITRA UV stabilized polyurethane (PUR) tubing provides protection against UV rays of sun as well as those from lights used in curing processes. NITRA PTFE tubing, with Shore D 55 hardness, suits high-heat applications. Its mechanical properties are resistant to degradation under severe conditions. Read More

Fluid & Gas Flow Equipment

Heavy Wall Convoluted Hose Assemblies - Improved Vacuum Resistance

July 2, 2013

Fort Worth TX - Parker Hannifin, the global leader in motion and control technologies, produces PTFE hoses assemblies with improved vacuum resistance.  These PTFE assemblies have a heavier wall (up to 33% more PTFE) than a typical convoluted hose and can handle vacuum applications in temperatures up to 500°F/206°C. The increased wall thickness not only provides improved vacuum resistance at... Read More

Fluid & Gas Flow Equipment, Materials & Material Processing, Transportation Industry Products

International Aerospace and Defence Primes Explore New Technologies at Icon Polymer

June 28, 2013

Icon Polymer Group, a technology company in engineered polymer products, has further confirmed its status as a key partner to the global aerospace and defence sector by hosting a group of senior sector decision makers at its global headquarters in Retford, UK. The visit was part of a UK Trade & Investment (UKTI) initiative to showcase the country's niche manufacturing capabilities and link up... Read More

Fluid & Gas Flow Equipment, HVAC, Material Handling & Storage, Mechanical Power Transmission, Portable Tools

The Gates Corporation Releases New Aftermarket Parts

June 28, 2013

Gates expands its aftermarket coverage with SKU additions across its product line, adding 128 parts for maximum coverage on late model vehicles as well as the all-new PolarSeal® II Clamp Assortment and PolarSeal II Male Flareless Assemblies for A/C repair. DENVER, Colo. – The Gates Corporation, a global, diversified manufacturer of industrial, automotive and heavy-duty aftermarket... Read More

Fluid & Gas Flow Equipment, Mounting & Attaching Products, Safety & Security Equipment

Flexible Sprinkler Connections include FM-approved braided hose.

June 26, 2013

Model FSC-28B braided flexible sprinkler connections are available in standard lengths of 39 3/8 and 59 in. with either ½ or ¾ in. NPT sprinkler connection. Connection and hose are shipped pre-assembled, with installation bracket providing secure fit to suspended ceiling grid and lateral adjustment for precisely locating sprinklers. Center bracket design also allows for vertical adjustment to accommodate semi-recessed and concealed sprinkler installations. Read More

Fluid & Gas Flow Equipment

Polyurethane Vacuum Hose resists abrasion and puncture.

June 25, 2013

Flex-Tube® PU 60 HF thermoplastic polyether polyurethane hose features clear wall and black ABS helix designed for light bulk handling of dry materials. Average CL bend radius is 6.5 in. while hose weighs 1.4 lb/ft. Abrasion-, puncture-, and UV-resistant product is available in 3–12 in. ID sizes up to 50 ft long. Agricultural, grain vacuum, light construction, leaf collection, and similar dry processes are supported. Read More

Fluid & Gas Flow Equipment

Custom Machined Fittings are precision manufactured.

June 25, 2013

Custom Machined Fittings feature tolerances as close as 0.001 in. and surface finishes to 8 rms, and are produced in diameters from 0.250-3 in. Units are produced from various materials, including 316 stainless steel; Inconel®, titanium, aluminum, or plastic; plus other high temperature alloys. Proper sealing is also ensured as honing and lapping are completed during production. Fittings are suited for use with precision instruments, manifolds, and valves. Read More

Fluid & Gas Flow Equipment, Material Handling & Storage, Sensors, Monitors & Transducers, Test & Measuring Instruments

Hose-Continuity Tester monitors static electric charge buildup.

June 25, 2013

OhmGuard® Hose-Continuity Tester ensures assembled hoses are grounded to transferring vehicle during times when combustible gas, vapor, or dust atmospheres may be present. Operating as pass or fail test, instrument attaches to free coupling or nozzle of last hose connection and vehicle grounding point. It features green LED on OhmGuard® clamp, which pulses continuously if electrical resistance is below 100 Ω and stops to warn operator of danger. Product has IP65 ingress protection rating. Read More

Cleaning Products & Equipment, Fluid & Gas Flow Equipment

Vacuum Accessories feature 10 mm stud for ESD protection.

June 24, 2013

Oval Dust Brush (31653STUD), Crevice Tool (31654STUD), 16 in. Flexible Gooseneck (31657STUD), 6 ft Stretch Hose (31661STUD), 10 ft Stretch Hose (31671STUD), and 16 ft Stretch Hose (31681STUD) feature 10 mm stud that allows direct grounding of hose or accessory for optimal ESD protection. These 6 ESD-safe products are compatible with Atrix Express, Omega Plus, Omega Supreme Plus, and High Capacity Series as well as 3M 497 Series vacuums. Read More

Electrical Equipment & Systems, Fluid & Gas Flow Equipment, Mounting & Attaching Products

Split Collet Connectors come in large thread sizes.

June 20, 2013

Constructed of stainless steel and anodized aluminum, FasMate FN Series can withstand pressures up to 3,500 psi without thread sealant and wrench tightening. In addition to thread port sealing range of 1/8–½ in. NPT, BSPP, BSPT, SAE O-Ring, and ISO O-Ring Metric sizes, units include 3/4 in. NPT, BSPP, BSPT, and -12 (1 1/16–12) SAE O-Ring to meet growing needs of manufacturing industry. Modular connectors are suited for pressure and vacuum testing, filling, and flushing applications. Read More