Corning Cable Systems
Hickory, NC 28603-0489
Mar 27, 2009 LANscape® Industrial Connector Housing (ICH) series accommodates conduit with concentric knockouts or rubber grommets. Units have padlock-capable outer door as well as separate inner door that protects provider side of unit from unauthorized access. Likewise-lockable Industrial Splice Housing (ISH) series is wall-mountable for transition splicing between cable at building entrance or pigtail splicing, providing storage and protection of fiber splices in individually accessible trays.

Bridgeport Fittings, Inc.
Stratford, CT 06497
Dec 05, 2008 Manufactured with die cast copper free aluminum with gray enamel finish, Combination Type LLR conduit bodies are UL Listed rain tight when used with threaded Rigid/IMC conduit and Rain tight EMT connectors. Units come preassembled with cover and gasket, and are available in ½-2 in. trade sizes.

Electri-Flex Co.
Roselle, IL 60172 1994
Sep 30, 2008 Comprised of nylon conduit, connectors, and accessories, Corrlok® System suits passenger rail vehicle wiring, industrial control equipment, robots, and machine tool applications. Available in CL, CLR, CLL and CLFR conduits, Corrlok is lightweight, liquidtight, and withstands tough environments. One-piece connectors come in straight and angled, flanged, and threaded models. Mounting brackets, reducers, and specialty connectors including metric and PG threads are also available.

Lutze, Inc.
Charlotte, NC 28273
Aug 13, 2008 To speed installation, CONDUFIX uses holding cams to provide mechanical lock. Three-staged conduit profile maintains roundness even when bent, preventing kinks. Tapered conduit socket provides IP66 rating, which can be increased to IP68 by inserting O-ring into last groove. Ranging from lightweight to medium to reinforced versions made of PA6 corrugated conduit for various loads, conduit system also comes in PA12 corrugated version for continuous motion robotic applications.

EGS ELECTRICAL GROUP ? APPLETON
Rosemont, IL 60018
May 08, 2008 Flexel(TM) EMT Flexible Fittings come in 1¼ to 4 in. sizes with stub fittings on both ends to allow for use with set-screw and compression fittings. They bend to one or more angles with just elbow grease, knee, or hammer, to full 90° bend or any position in between, and they can also be re-bent. Internal diameter is maintained per NEC specification, and fittings are suitable for indoors and dry locations and are UL Listed and CSA Certified.

Thomas & Betts Corp.
Memphis, TN 38125
Dec 06, 2007 Designed for Rigid or IMC conduits, Red Dot® D-PAK® includes conduit body, cover, and gasket in single package. Clear wrapper provides instant identification and protects product on job site. With die-cast aluminum construction, conduit bodies are UL Listed and designed to ensure elements. Expanded line covers hub sizes from ½-4 in.

Parker/Texloc Div. of Parflex
Fort Worth, TX 76106
Nov 06, 2007 Fluoroplastic Paratubing consists of 2-4 tubes longitudinally thermally welded, creating single conduit consisting of multiple individual tubes. It enables OEMs to run several fluid lines as one entity and then split tubes apart for branching to different connectors when needed. Available in chemically inert and non-leaching Texflour(TM) FEP and PFA with non-stick surface, tube is offered in sizes as small as .031 in. ID x .030 wall up to 3 in. OD.

EGS ELECTRICAL GROUP ? APPLETON
Rosemont, IL 60018
Jun 06, 2007 Available in 7 configurations ranging from ½-4 in. trade sizes, Model FM9(TM) conduit bodies are forged from copper-free aluminum for lightweight mounting and corrosion resistance. Suited for Class I, Division 2 applications, products feature wiring cavity along with domed cover, and use stainless steel pan-head cover screws. They help electricians tackle wide range of jobs encountered when installing conduit runs, from pulling wire to connecting branch runs.

Elco Enterprises, Inc.
Jackson, MI 49201
Apr 27, 2007 Conduit Armor(TM) is coated to prevent melting in high-temperature and high-spatter areas in or near weld cell. Able to reduce pull on feed motor by up to 4 lb, this UL-94-VO compliant product is available as option on blue polymer conduit and comes standard on extra flexible conduit in bulk or pre-cut lengths.

Electri-Flex Co.
Roselle, IL 60172 1994
Apr 02, 2007 Made of corrosion resistant, hot-dipped galvanized steel strip, type FSC flexible conduits feature profile and helical shape that allows it to withstand substantial impact and crushing forces. Available in 3/8-4 in. sizes, unjacketed, non-combustible conduits are able to make tight bends and are suited for high temperature applications.

EGS ELECTRICAL GROUP ? APPLETON
Rosemont, IL 60018
Mar 20, 2007 Ready for out-of-the-box installation, ALL-IN-ONE(TM) conduit bodies meet needs of electricians in industrial and commercial construction. Threaded hub model works with rigid conduit and IMC, while Multi-Hub(TM) threaded and set screw design works with rigid conduit, IMC, and EMT. Both versions, constructed of 100% copper-free aluminum, have neoprene gasket and stamped aluminum cover. Configurations are available for connecting straight conduit runs, branch conduit runs, and 90° bends.

ERICO, Inc.
Solon, OH 44139-2631
Oct 09, 2006 Screw-On Conduit Supports attach ½-1 in. EMT conduit or MC/AC cable to wood and metal studs. They comply with NEC® 358.30(A) and CEC© rule 12-1404, which requires conduit support within 36 in. of electrical box. Units are gangable and work with both 1½ and 2 1/8 in. deep boxes. Alignment tab positively locates fastener on stud, and serves to keep conduit in line with box knockout and support brackets.

Thomas & Betts Corp.
Memphis, TN 38125
Sep 14, 2006 Steel City® MS series Bracket Boxes feature gripping teeth that eliminate need to use fasteners and tools for installing outlet box onto metal stud. Installed within 4 sec., products feature center mark locator window and side support for stud cavity depths up to 4 in. Boxes come in 4 and 4 11/16 in. square sizes, in 1 and 2 1/8 in. depths, and include eccentric knockouts and armored cable clamps; 4 in. boxes also include non-metallic cable clamps.

Thomas & Betts Corp.
Memphis, TN 38125
Aug 14, 2006 Series 35 Conduit Bodies are made of zinc-plated iron with aluminum acrylic coating to offer impact and corrosion resistance. Featuring tapered and NPT-threaded hubs, bodies and covers make bends in rigid conduit systems, connect and change direction of rigid conduit runs, and provide access to branch conductors for splicing. Suitable for use in concrete, conduit bodies and covers come in ½-4 in. sizes in types C, LB, LL, LR, and T, and in ½-2 in. sizes in types TB and X.

Thomas & Betts Corp.
Memphis, TN 38125
Jul 17, 2006 Constructed using flexible PVC cover with woven nylon web bonded to smooth and seamless flexible PVC inner core, Type A nonmetallic conduit retains original shape even after being compressed. It comes in sizes from 3/8-2 in. and operates over -20 to +60°C range. Type A liquid tight connectors feature ferrous construction with nylon-insulated throat and include Santoprene® sealing gasket with 316 stainless steel retaining ring that ensures NEMA LT seal.

Thomas & Betts Corp.
Memphis, TN 38125
Jun 13, 2006 Able to withstand vibration and corrosive environments, Type A Liquidtight Connectors and Conduit are suited for cable carrier installation, robot assembly, automotive applications, as well as outdoor signs and lighting at more than 1,000 V. Ranging from 3/8-2 in., conduit is constructed of flexible PVC cover with woven nylon web bonded to seamless flexible PVC inner core. Ferrous connectors have nylon-insulated throat and Santoprene® sealing gasket with 316 SS retaining ring for NEMA LT seal.

EGS ELECTRICAL GROUP ? APPLETON
Rosemont, IL 60018
Mar 20, 2006 UL-Classified to interchange with equivalent Crouse-Hinds Form 7® parts, FM7(TM) Series products have bodies with corrosion-fighting epoxy powder coat. They are available in Grayloy iron, malleable iron, or aluminum, with Wedge-Lok(TM) clip covers. Flat back design allows for secure mounting and wiring room. Able to connect and change direction of conduit runs, conduit bodies also serve as wire pulling fittings, make bends in conduit system, and provide openings for wire splicing.

ERICO, Inc.
Solon, OH 44139-2631
Jan 19, 2006 For overhead decking applications, CADDY® SPEED LINK LD comes with universal toggle/wire rope assembly in 6.6, 16.4, and 32.8 ft lengths. Optional Y-toggle consists of 20 or 31 in. length of wire rope with toggle on each end. Center of wire rope is looped and crimped. Universal support system suspends static loads, even at angles, such as lighting fixtures, speakers, alarm sensors, signage, and pipes. Plastic sleeve keeps wire rope looped up until ready for installation.

Thomas & Betts Corp.
Memphis, TN 38125
Sep 27, 2005 Non-metallic PVC Xtraflex® Type B Conduit is sunlight and oil resistant. It is available 3/8 in. gray packaged in 500 ft reels; 1/2 in. gray or black packaged in 500 and 1,000 ft reels; and 1 in. gray or black packaged in 500 ft reels. With smooth surface ID that facilitates wire pulling and rating of NEMA 6P submersible when used with Bullet® Liquidtight fittings, Xtraflex is suited for food processing equipment, wireway extensions, and control console wiring.

Heyco Products
Toms River, NJ 08753
Aug 11, 2005 Offered in sizes from 13–54 mm, Flexicon FPI Corrugated Nylon Electrical Conduit protects current-carrying wires and cord sets from moisture, debris, insects, and animals as well as oils, solvents, abrasives, and UV light. It remains flexible and crush-resistant, and withstands wear and tear associated with repetitive motion in robotics and automation. Conduit is temperature rated from -58 to +230°F, has low smoke and toxicity ratings, and is self-extinguishing.