LEDtronics, Inc.
Torrance, CA 90505
Aug 10, 2007 Combining LED technology with 25 mm Edison bases, R30 LED Reflector Spotlight Bulbs come in 120 Vac and in 5 light emitting angles of 15, 20, 30, 40, and 95°. Colors include 3,000 K Warm White, 5,500 K Pure White, 8,000 K Cool White, 633 nm Red, 592 nm Yellow, 525 nm Aqua Green, and 470 nm Blue. Infrared lamps are offered in wavelengths of 850, 880, and 940 nm. Providing operating lives up to 11 years, LED cluster lamps continue to provide light even if one or more emitter fails.

LEDdynamics, Inc.
Randolph, VT 05060
Jul 24, 2007 Available in 5 standard shades of white ranging from daylight to warm white, EverLED TR allows existing fluorescent fixtures to be converted to LEDs by simply changing bulb. It incorporates electronic circuitry that allows LEDs to extract power from existing fluorescent ballasts regardless of technology used by ballast. Made of recyclable materials and measuring 48 in. long, T8 replacement provides equivalent light output of 40 W tube while consuming only 25 W.

Lamp Technology, Inc.
Bohemia, NY 11716
Jun 29, 2007 Suitable for replacement of 4-20 W lamps including incandescents lamps such as 6S6, 7C7, 15T6, and others, Model T6-B-W-120v LED is low-heat, shock and vibration resistant lamp that incorporates 12 LEDs in circular pattern with frosted dome. It offers wide dispersion and bright white light while providing life time of 100,000 hr.

EcoLEDs.com
Tucson,, AZ 85718
Jun 22, 2007 Using only 5.2 W of electricity, Model E27 3W LED light produces 135.2 ftc of light on desk surface from distance of 24 in. Light bulb contains 3 LEDs, and lasts 50,000 hrs before needing to be replaced. Suited for home and office use, unit also reduces CO₂ emissions by 3,570 lb over its life.

Henkel Loctite Corporation
Rocky Hill, CT 06067
Jun 18, 2007 Fully visible LED spot curing system, Loctite® Indigo(TM) CureJet(TM) LED, safely and immediately cures visible light cure adhesives with minimal heat output. It emits no UV wavelengths and is suited for working with UV blocking clear and select colored substrates. Operated in timed or continuous-duty modes, stackable system offers instant on/off capabilities and produces typical output to 4.3 W/cm² over focused 0.38 in. dia cure area to depths of 0.5 in.

LEDtronics, Inc.
Torrance, CA 90505
May 18, 2007 Designed to fit battery-powered flashlights with 9 mm screw-in incandescent bulb, T3¼ (9 mm) Single-Contact Screw-In LED Bulbs are offered with 1 or 3 cool white LEDs that respectively offer total light output of 15 and 45 cd. Average life span is 50,000 hr, and solid-state design is impervious to shock, vibration, frequent switching, and environmental extremes. Cool white (8,000 Kelvin) bulbs output 13,000 MCD at 20° angles and produce minimal heat.

LEDtronics, Inc.
Torrance, CA 90505
Feb 22, 2007 Offered as direct replacements for 15T6 or 20T6 incandescents, EXL-W Series Exit Sign LED Bulbs feature polycarbonate resin construction that is flame resistant and promotes visibility in bright light and heavy smoke situations. Base options include S6 candelabra screw, 15 mm intermediate screw, and 15 mm dc bayonet, with base-dependant energy usages of 2.20 or 1.10 W. All solid-state bulbs light up on 120 V and put out 12 lumens of unfiltered light.

Philips Lighting Co.
Lewiston, ME 04240
Feb 22, 2007 With color temperature of up to 4,000ºK, CrystalVision Ultra headlamp bulbs feature distinctive blue-cap and deliver white color and bright beam. DOT compliant bulbs are offered in 2-bulb packages and suited for use in most vehicles.

LEDtronics, Inc.
Torrance, CA 90505
Feb 16, 2007 Offered as alternative to 15T6 or 20T6 incandescent exit sign bulbs, solid-state EXL-W Series features flame-resistant polycarbonate resin construction that promotes visibility even in brightly lit situations. Bulbs exhibit average lifespan of 50,000+ hr and come in base options of S6 Candelabra Screw, 15 mm Intermediate Screw, and 15 mm DC Bayonet. All bulbs light up on 120 V and put out 12 lumens of unfiltered light. Depending on base style, LEDs consume 1.10 or 2.20 W of energy.

Full Spectrum Solutions
Jackson, MI 49203
Feb 08, 2007 Energy Star-approved BlueMax(TM) Compact Fluorescent Light (CFL) bulbs utilize 6 phosphor blend to produce high definition (HD) light that simulates sunlight with 94+ CRI and 5,900 Kelvin. With lifetimes rated at 10,000 hr each, full spectrum lighting solutions range in styles and wattage from traditional 14 W spiral to 26 W flood. Flicker-free bulbs can withstand elevated temperatures in enclosed fixtures.

Elma Electronic Inc.
Fremont, CA 94538
Jan 05, 2007 Offered in 1-10 wide options, lightpipes feature LEDs that transfer light to front panel with translucent coloration. Products are available in protruding styles or versions that are mounted flush with front panel. Capable of emitting light even when embedded deeper within panel, lightpipes have chamfered light coupling area that allows other LEDs to emit light perpendicular to circuit board. Combinations of single, dual, vertical, and horizontal configurations are available.

LEDtronics, Inc.
Torrance, CA 90505
Dec 14, 2006 Smart B321-XIW comes in 9 mm T 3¼ bayonet base that mounts directly into industry standard sockets and is designed for panel-mount switch-gear applications where multiple voltages indicators are used. Operating at standard voltages of 6-48 Vdc, bulb will shine brightly at 6,500 mcd and has viewing angle of 40°. Solid-state design is impervious to shock, vibration, frequent switching, and environmental extremes. Average life is rated at 100,000+ hr.

LEDtronics, Inc.
Torrance, CA 90505
Nov 28, 2006 Consuming 0.935 W of power, S6 Right-Angle Candelabra LED Bulbs have solid-state design impervious to shock, vibration, frequent switching, and environmental extremes. Normal LED gives off 3 and 2 lumens for cool and warm white versions, respectively, while super bright cool and warm color LEDs output 5 and 3.8 lumens. Cool white bulb uses 8,000K LEDs and outputs 13,000 MCD at 17° angles, and warm white 3,000K LED outputs 14,000 MCD at 20° angles.

LEDtronics, Inc.
Torrance, CA 90505
Oct 04, 2006 Offering average life span of 100,000+ hr, TRF-G30 LED Series can be used in any situation that allows for 25 mm Edison screw base attachments. Globe covering lets LEDs shine in multiple directions and protects them from environment. Bulbs, which can output 510-970 candelas while consuming 13 W of power, have solid-state design impervious to shock, vibration, and frequent switching. Standard colors include red, green, yellow, super-bright warm white, and cool white.

LEDtronics, Inc.
Torrance, CA 90505
Aug 24, 2006 Featuring average life span of 100,000+ hr, T-10 Series is constructed for right angle illumination of objects. Solid-state design is impervious to shock, vibration, frequent switching, and environmental extremes. At 120 Vac, bulb uses 2 W of power. It comes in 3,000K warm white model that provides 98 total lumens at 40° angle, while 8,000K cool white models produce 192 lumens and come in 15° and 30° lighting angles. With 45° beam angle, 6,000K cool white model provides 192 lumens.

Henkel Loctite Corporation
Rocky Hill, CT 06067
Jul 05, 2006 Equipped with internal cooling fan, Loctite® 7700-HD LED Light Source portable curing system offers output of 1.0-1.5 W/cm² at peak wavelength of 405 nm and provides effective continuous duty cycle use. Powered from ac power adapter, hand-held or stationary mount system features extended tip for use on small adhesive joints. Sized at 9 x 1.4 x 2 in. and weighing 0.75 lb, unit may be actuated using foot switch, PLC interface cable, or timer.

LEDtronics, Inc.
Torrance, CA 90505
May 24, 2006 Measuring 2 in. in length and consuming 0.918 W, Series LSL464 plugs into 120 Vac, S6 candelabra base nightlight socket and features six 5 mm discrete incandescent white LEDs. Solid-state design renders LEDs impervious to electrical and mechanical shock, vibration, frequent switching, and environmental fluctuation. Bulb stays cool making it safe for office buildings, lunchrooms, bedrooms, hallways, kitchens, and bathrooms.

Henkel Loctite Corporation
Rocky Hill, CT 06067
May 03, 2006 Designed for use with Loctite 3552(TM) and 3553(TM) Visible Light Cure Adhesives, Loctite ZETA 7720 Visible Light Wand System provides safe, immediate cure for assembly applications. Its output, which exceeds 1.5 W/cm² of visible light irradiance, can cure bead sizes as large as ¾ in. dia. Featuring fiber optic light guide and 100 W visible arc bulb, product requires no venting or specialized protective equipment to ensure worker safety.

Xenon Corp.
Woburn, MA 01801 1057
Apr 20, 2006 CoolCureXL RC-801 Curing System employs pulsed UV light that provides 1,000 w/cm² peak pulse power to penetrate and completely cure 100 µm thick transparent protective layer on Blu-ray discs. Featuring spiral lamp to match footprint of 12 cm dia. discs, modular system can be integrated into any in-line process for manufacturing 3G optical storage media. System, comprised of lamp housing, separate controller, and power supply, produces under 300 µsec pulses.

Kinetic Instruments, Inc.
Bethel, CT 06801
Nov 14, 2005 Utilizing UV elliptical reflector lamp to optimize radiant density, SpotCure-H is suited for curing variety of adhesives. Spectral output exhibits optimal intensity in near UV range from 300-400 nm. Along with variable timing from 1-60 sec, product features 110-220 V switchable voltage and can be configured to operate in hands-free mode.