Oclaro, Inc.    San Jose, CA 95134
Mar 09, 2012 Able to perform full switching and attenuation reconfiguration within several hundred msec and achieve times of less than 100 msec, 1x23 wavelength selective switch delivers performance for next generation reconfigurable optical add/drop multiplexer (ROADM) networks featuring colorless, directionless, and contentionless architectures. Switch leverages MEMS and liquid crystal technologies that enable it to scale in size while maintaining critical performance characteristics.

Lighting Science Group Corp.    Dallas, TX 75201
Mar 09, 2012 Mimicking lumen output of 50 W incandescent or halogen bulb, 9.5 W Glimpse(TM) is fully recyclable and free of toxic hazards, including mercury. Four inch unit adapts to most 4, 5, and 6 in. recessed downlight cans and is dimmable down to 5%. In addition, downlight can be surface mounted as light fixture making it suited for commercial retrofit or new construction applications.

Microsemi    Irvine, CA 92614
Mar 09, 2012 Supplied in plastic, 16-pin SMT SOIC, RoHS-compliant and halogen-free LX27901 provides LED driving capabilities in televisions based on LCD Integrated Power Supply (LIPS) architecture. Non-dissipative architecture promotes power efficiency while enhancing backlight performance. Along with 3 selectable drive modes, features include ACU_BRITE(TM) algorithm for dimming, synchronous regulation to reduce number of power conversion stages, and accurate current matching.

Clore Automotive    Lenexa, KS 66215
Mar 09, 2012 SOLAR PRO-LOGIX Model No. PL2310 utilizes microprocessor-controlled logic to deliver precise charging routine. This 10/6/2 A, 6/12 V battery charger adapts its approach based on requirements of battery being serviced. Such adaptations can include use of soft start or battery repair modes and temperature compensation. Safety features include over-voltage and reverse polarity protections as well as battery fault detection.

Harting KGaA      Germany
Mar 08, 2012 Han® PushPull cable-to-cable housings enable flexible cabling for transmission of Energy, Data, and Signal to protection type IP 65/67. Suited for device connection and installation of switch cabinets and machines for machine and plant construction, products make it possible to use ex-works pre-assembled and individually tested system cables as well as flexible cabling and cable length extensions on site. Products support diverse range of connection technologies.

TE Connectivity Ltd.    Berwyn, PA 19312
Mar 08, 2012 Offering 50 A/400 Vdc max rating and hold current of 50 A on main line, MHP-SA50-400-M5 circuit protection MHP device provides protection to high-power lithium battery and module applications. Metal hybrid PPTC provides overcharge protection in multi-cell battery packs and modules in which circuit protection devices interface with electronics via third terminal signal line that enables external activation. Device can be activated electronically with as little as 3 A, via signal line.

Texas Instruments, Inc., Semiconductors    Dallas, TX 75243
Mar 08, 2012 Designed to minimize power consumption of RF power amplifiers across all operating conditions, Model LM3242 supports up to 1 A and is compatible with 3G/4G applications, while Model LM3243 supports up to 2.5 A and is compatible with 2G/3G/4G applications. Devices dynamically adjust power delivered to PA based on how much power is actually needed. Both ICs achieve 95% efficiency and feature multiple modes of operation to maximize efficiency for all battery and output conditions.

Clore Automotive    Lenexa, KS 66215
Mar 08, 2012 SOLAR's 6/12 V, 1.0 A Pro-Logix battery maintainer, PL2110, controls each phase of charging process to ensure each battery serviced gets optimal charge. Compatible with various battery types, device comes in case sealed against dust/debris and features fully automatic operation as well as polarity protection. Quick attach cord on output side facilitates interface with included accessories: battery clamps, ring terminals, and 12 V male adapter.

Clore Automotive    Lenexa, KS 66215
Mar 08, 2012 Featuring 20/10/2 A, 6/12 V rating, PRO-LOGIX PL2320 combines fully automatic operation with ability to charge multiple battery types, including conventional, AGM, gel cell, spiral wound, deep cycle, and marine batteries. System adapts approach based on needs of each battery, such as activating soft start mode on deeply discharged batteries or battery repair mode on older/distressed batteries. For safety, charger includes over-voltage protection, reverse polarity protection, and fault detection.

Meyda Tiffany    Yorkville, NY 13495
Mar 07, 2012 Measuring 15.5 in. tall, Amber Mica Table Lamp is designed with Mahogany Bronze frame and Amber blown-glass lighted base featuring overlaid filigree of dragonflies in matching Mahogany Bronze finish. Dragonfly Table Lamp, standing 16 in. tall, features dragonflies with jeweled eyes and metal-filigreed wings over copperfoiled blue and purple art glass. Shade rests on Mahogany Bronze base with cast dragonflies on green glass mosaic inlay. Both include inline switches and pull-chains on sockets.

Pickering Interfaces Inc    GRANTS PASS, OR 97526
Mar 07, 2012 Featuring maximum switching voltage of 110 Vdc or 250 Vac, 5 A Model 40-549 is available in variety of 32 and 64 crosspoint configurations with Y axis sizes of x4 and x8. Configured as 8 x 4 matrix that switches voltages up to 125 Vdc and 250 Vac, 10 A Model 40-551 features optional loop through facility that simplifies user cabling when matrix size is expanded through use of additional modules. Device is also available in 8 x 2 and 4 x 4 configurations.

TDK-Lambda Americas Inc.    San Diego, CA 92154
Mar 07, 2012 Compliant with 2nd Generation DOSA standards, DOSA-2 non-isolated DC/DC converters do not require any external tuning components and feature edge plated castellation pads that facilitate SMT solder joint inspections. There are 4 series - iCF, iCG, iBF, and iAF - with respective output current/power ratings of 3 A/16.5 W, 6 A/33 W, 12 A/66 W, and 20 A/110 W. All operate with 4.5-14 V input and feature adjustable output voltages from 0.7-5.5 V with conversion efficiencies to 97%.

Dwyer Instruments, Inc.    Michigan City, IN 46361
Mar 07, 2012 Designed for level monitoring of bulk materials, Series PLS2 features rotating measuring vane that is driven by brushless synchronous motor at 1 rpm. As product builds up, paddle rotation is impeded and resulting motor torque activates output switch and stops motor. Torque adjusting mechanism eliminates need for different sized paddles. Constructed with industry standard 1 ¼ in. male NPT connection, electromechanical switch can be side- or top-mounted.

EAO Switch Corp.    Milford, CT 06460
Mar 07, 2012 Designed to occupy 34 mm of behind-panel depth, Series 51 includes illuminated pushbuttons, indicators, selector switches, and key switches in different sizes, shapes, and materials, such as plastic or aluminum. Switch configurations of up to 4 normally-open and 4 normally-closed contacts can be obtained per unit. Depending on selected switch element, operating voltages range from 10 µA/100 µV to 250 V/5. Terminal choices include solder, solder/plug-in, and PCB styles.

GE Energy    Atlanta, GA 30339
Mar 07, 2012 To help utilities improve reliability of their distribution network, End-to-End Fault Detection, Isolation, and Restoration (FDIR/FLISR) system can detect power system outage locations and automatically sectionalize and reconfigure distribution circuits to restore power to as many customers as possible. Complete and scalable solution can reduce typical customer outage times as well as improve SAIDI and SAIFI reliability indices.

austriamicrosystems AG    Schloss Premstaetten A 8141  Austria
Mar 07, 2012 Supplied in 12-ball, 1.7 x 1.4 x 0.5 mm WL-CSP package with 0.4 mm pitch, AS3674 and AS3490 are inductive boost converters that exhibit 90% peak efficiency and require 4 external components. Able to control 5 current sources with each driving 2 LEDs in series, AS3674 is 2 MHz DC/DC switch mode step-up converter that allows current for LED channels to be set by external resistor with max of 25 mA per channel. With same functionality as AS3674, AS3490 addresses 3 LED channels.

Keystone Electronics Corp.    Astoria, NY 11105
Mar 07, 2012 Featuring symmetrical flat-wire design, miniature SMT Test Point enables high-strength, test point-to-PCB bonding with minimized footprint. Low-profile solution accepts various gripping probes to replace wire-wrap posts and turret terminals. This Mini-pad version is suited for testing circuitry of high-density PCB packages. Product is manufactured from phosphor bronze and silver plate, which can accommodate use of lead-free solder and traditional reflow processing.

Amphenol Industrial Operations    Sidney, NY 13838
Mar 06, 2012 The ePower 200 is available in 2- and 3-pin power configurations with current rating of 200 A per contact. Connector series feature IP2X style sockets available in crimp, lug, or bus bar termination, while cable plugs feature IP2X style crimp pin and can accommodate shielded wires. It includes all-aluminum shell, strain relief for jacketed cable incorporated into shell, and 2 signal terminals for last mate-first break HVIL purposes.

Belden CDT Inc.    St. Louis, MO 63105
Mar 06, 2012 CSA Tray-rated VFD cable accommodates motor-to-drive connections, noise-sensitive applications requiring shielded power cable, and other solid-state power supplies with variable frequency needs. Decreasing effects of common mode current containment, capacitive coupling, and reflected wave voltage, cables range from 14-4/0 AWG and contain 3-stranded BC circuit conductors with 3 symmetrical BC grounds and 2 spiral copper tape shields. PVC jacket is resistant to effects of UV and oil.

Schaefer, Inc.    Hopkinton, MA 01748
Mar 05, 2012 Providing 500 W of power in chassis mount package, PRC-500 Series includes versions that meet industrial EN60950 or rail EN50155 standards. Units feature standard nominal input voltages of 24, 48, 72, and 100 Vdc and provide conversion to adjustable 24 Vdc and 48 Vdc outputs that are regulated to 0.2% or better. ORing FET option allows parallel operation of multiple units. Measuring 10.47 x 7.08 x 2.16 in., converters operate from -25 to +75°C for installation in extreme conditions.