Pulse Electronics    Trevose, PA 19053
May 08, 2012 Measuring 65 x 12 x 1 mm, Programmable LTE Antenna enables 4 states for low band operation: 700-750 MHz (LTE low), 750-790 MHz (LTE high), 820-900 MHz (GSM850), and 880-960 MHz (GSM900) as well as high band operation covering GSM 1800/1900/2100. Antenna features return loss of -6 dB, impedance of 50 W, and efficiency greater or equal to 40%/-4dB. To fit function of laptop, antenna can be implemented to device display area and adjusted for various display sizes.

L-Com, Inc.    North Andover, MA 01845
Apr 11, 2012 Designed for 2.4 GHz and 5.1-5.8 GHz bands, Omnidirectional MIMO Antennas incorporate dual polarization technology that enables interoperability of 2 radio transmit and receive paths. Technology also allows for attenuation of unwanted signals from adjacent channels and/or co-located equipment. Offering 10 or 13 dBi gain, depending on model, antennas have UV-resistant radome for all-weather operation, and mast mounting capabilities with hardware included.

Radicom Research    San Jose, CA 95131
Mar 22, 2012 Designed for OEM integration, WiFiHU2 series supports wireless standards, including 802.11b/g/n, and USB 2.0 connectivity. Transmission, protocol stack, and integrated 2TX/2RX MIMO antenna technologies enable over-the-air throughput of 300 Mbps downstream and upstream, with PHY rates using 40 MHz bandwidth. Operating from -40 to +85°C, modules integrate WEP/WPA/WPA2 security protocols for host protection and store firmware/configuration parameters in on-board NVRAM.

Weidmuller, Inc.    Richmond, VA 23236
Mar 14, 2012 Encased in metal housing with -40 to 167°F temperature range, Ethernet WLAN Modem is IEEE 802.11a/b/g compatible in 2.4 and 5.8 GHz bands. Power can be supplied to device using PoE or with redundant power supply connections. Ability to utilize PoE and support multi SSID, VLAN, and QoS makes module suited for integration into existing wired/wireless Ethernet networks. To prevent unauthorized access to networks, unit includes WPA/WPA2 encryption and RADIUS server authentication.

Marvell Semiconductor Inc.    Santa Clara, CA 95054
Mar 09, 2012 Suited for TD-SCDMA and LTE markets, Marvell® PXA1802 multimode TD LTE modem chipset integrates TDD, FDD LTE, and TD-SCDMA technology onto single chip. Thin architecture includes DSP modem core; cellular baseband core; PWU; DMA; and external interfaces. Supporting next-generation LTE standards with Cat 4 150 Mbps downlink throughput and Release 8 TD-SCDMA High-Speed Packet Access (HSPA+), modem includes processor core with packet processing accelerators and L1/L2 caches.

Qualcomm, Inc.    San Diego, CA 92121
Feb 27, 2012 Based on MDM9615(TM) and MDM9215(TM) Gobi 4G LTE wireless baseband modems, fifth generation Gobi(TM) Reference Platform delivers LTE connectivity on FDD and TDD networks worldwide, with backwards compatibility to HSPA+ and EV-DO networks. Product includes embedded GPS capability as well as API with LTE extensions that provides common software interface for developing connection managers, GPS applications, and other manageability or security solutions that connect, locate, and manage 3G/4G devices.

Redpine Signals, Inc.    San Jose, CA 95131-2019
Jan 23, 2012 Fostering accelerated WiFi deployment, WiSeConnect(TM) provides feature set with Wi-Fi Direct(TM), Enterprise security, SEP 2.0, Embedded AP, and multiple host interfaces. Secure WiFi module is self-contained, with all hardware and software required for WiFi and regulatory compliance. Supplied in 35 x 22 mm package, product does not limit achievable WiFi throughput, operates with 3.3 V supply, and also comes in variants with single-band 2.4 GHz and dual-band 2.4/5 GHz operation.

Patriot Memory    Fremont, CA 94538
Jan 17, 2012 Designed for integration with tablets and other mobile devices, portable Gauntlet Wifi allows immediate access to stored data for up to 5 devices. App support is provided for IOS, Android, and plug-and-play compatibility with Windows®-based OS, and lithium-ion battery enables up to 5 hr of continuous data streaming. With WPA security and With 150 Mbit transfer rate, solution supports 2.5 in. HDDs and SSDs, integrates 64 MB SDRAM, and offers 802.11 a/b/g/n WiFi and USB 3.0 connectivity.

Weidmuller, Inc.    Richmond, VA 23236
Dec 09, 2011 Built around 802.11b/g standard, WI-MOD-E-G offers 108 Mbps throughput and 400 mW transmit power. This 2.4 Ghz unit can be dropped into any existing network and supports operation as router/bridge, access point/client, and serial server (RS232/485). Able to serve as WiFi device and handle serial communications simultaneously, modem provides standalone Modbus Master-Slave functionality within network and with other modules in system featuring DHCP automatic IP addressing capability.

Qualcomm, Inc.    San Diego, CA 92121
Nov 23, 2011 Gobi(TM) 4000 allows customers to offer LTE/HSPA+ and LTE/EV-DO designs to meet embedded 3G/4G connectivity demands in mobile devices. Based on MDM9600(TM) and MDM9200(TM) multimode 3G/4G wireless modems and common software for connection management development, products are compatible with many connectivity standards. Software for MDM(TM) chipsets enables common software interface to help connect, locate, and manage 3G/4G devices despite wireless interface and OS.

RACOM    Nové Mìsto na Moravì   Czech Republic
Aug 02, 2011 Featuring software-configurable 12.5 or 6.25 kHz channels with respective maximum data rates of 42 and 21 kbps, RipEX Software Defined Radio with Linux OS allows data transmission speeds to 83 kbps in 25 kHz channel in 160-900 MHz bands. Ports include 2 COMs, Ethernet, and USB, and GPS option is available. Supplied in die-cast aluminum casing, radio operates from -40 to +70°C and can maintain connections over distances of 50+ km without line-of-sight visibility.

RADWIN    Tel Aviv 69710  Ireland
Jul 11, 2011 As 2.5 GHz BRS/EBS solution for North American markets, RADWIN 2000 targets 2.5 GHz license-holders such as carriers, ISPs, as well as public and private organizations such as educational institutions. Wireless point-to-point solution, meeting capacity requirements of high-bandwidth applications, delivers up to 200 Mbps and up to 16 E1s/T1s with carrier-grade reliability.

Radicom Research    San Jose, CA 95131
Jun 03, 2011 WiFiHU series supports wireless 802.11b/g/n through USB 2.0 interface. With protocol stack and 1TX/2RX MIMO antenna technology, device achieves over-the-air data throughput to 300 Mbps downstream and 150 Mbps upstream PHY rates (40 MHz) or 150 Mbps downstream and 75 Mbps upstream (20 MHz). This 1.0 x 1.1 x 0.25 in. module comes in 2 versions: WiFiHU-a with built-in dual-chip antennas, and WiFiHU-c with 2 U.FL connectors to attach antenna cables and antennas.

CalAmp Corp    Oxnard, CA 93030
Jun 01, 2011 Suited for private networks operating across VHF, UHF, and 900 MHz licensed spectrum, Guardian(TM) Data Modem provides high-speed serial connectivity that enables remote monitoring and control of utilities, oil and gas, and other industrial applications. Narrowband unit offers user-selectable data rates of 4,800, 9,600, and 19,200 bps with single radio store-and-forward operation, software-programmable channel bandwidth, on/off-line diagnostics, and programmable external I/O interface.

Netgear Inc.    Santa Clara, CA 96054
May 26, 2011 Combining ADSL2+ modem with WNDR3700 Ultimate Networking Machine wireless router, NETGEAR N600 Home DSL Gateway supports simultaneous 802.11n dual band networking at 2.4 and 5 GHz, providing 2 separate networks for data and video traffic. Unit supports NETGEAR ReadySHARE(TM) technology though 2 USB ports, transforming external USB hard drives into shared storage. Device is also future proof, with separate gigabit Ethernet WAN port for connecting to high-speed cable or fiber optic broadband modems.

Laird Technologies    Chesterfield, MO 63017
Apr 25, 2011 Rugged WTS2333C-FRSMM WiMAX antenna operates in 2.3-2.7 GHz and 3.3-3.9 GHz frequency bands with max gain of 2.3-2.7 dBi. Omnidirectional radiation pattern emits power consistently and evenly in all horizontal directions in one plane, and half-wave coaxial dipole design reduces ground dependence, enabling it to work as standalone antenna. With industry standard connectors and cables included, antenna suits 802.11 b/g/n WLAN, Bluetooth®, WiMAX MMDS and WiMAX 3.5 GHz applications.

Mountain Secure Systems    Longmont, CO 80501
Apr 05, 2011 Built for outdoor video, voice, or data applications, Summit Series provides coverage for point-to-point, point-to-multipoint, and wireless mesh networks in 2.4 and 5.8 GHz unlicensed frequency bands as well as licensed 4.9 GHz public safety band. Options include FIPS 140-2 validation, which provides highly secure, end-to-end encryption, as well as 802.11n MIMO technology, which offers connection speeds to 150 Mbps. Software allows Web-based configuration and management.

BelAir Networks Inc    Ontario K2K 2M5  Canada
Mar 28, 2011 BelAir100LP LTE Picocell combines LTE and dual 802.11n Wi-Fi radios with chip-based beamforming. Powered via AC, DC, or cable plant, product has internal array beam steering antennas that work in conjunction with chip-based beamforming to optimize throughput. Virtual AP capabilities enable multiple operators to share common wireless network infrastructure. Unit can be poll- or wall-mounted, or strand-mounted via aerial, pedestal, cabinet, or vault hybrid fiber coax infrastructure.

u-blox AG    Schweiz   Switzerland
Mar 28, 2011 LEON 2.5G modems are available with embedded CellLocate(TM) feature, which supports indoor positioning and eliminates no-fix scenarios where GPS signal conditions are poor or no GPS system is present. Adding parallel and complementary technique for determining position, CellLocate provides single API regardless of available positioning technology while overcoming GPS jamming scenarios. Uses include tracking stolen vehicles, goods/containers inside buildings and tunnels, and personnel.

Belden, Inc.    University City, MO 63105
Mar 16, 2011 Hirschmann BAT300-Rail Access Points and Clients are rated to IP40 and support 300 Mb/sec IEEE802.11n wireless communications standard. MIMO technology is also supported, ensuring stable wireless connection even if problems such as reflections occur. Model BAT54-Rail devices include up to 2 radio modules, operating at 5 or 2.4 GHz. Mountable on top-hat rails, both units operate in temperatures from -22ºF to +122ºF and have ISA 12.12.01 Class 1 Div 2 and ATEX IEC/EN 60079 Zone II certification.