API Technologies Corp.    South Plainfield, NJ 07080
Dec 14, 2011 Hermetically sealed on one end for thru-hole sealing between compartments, 9909 Series Spec Mini Solder-in Feed-thru Filter is housed in miniature case measuring 0.140 in. dia (flange) x 0.120 in. dia (barrel) with 0.110 in. body length and total overall length of 0.400 in. including leads. Unit features monolithic discoidal capacitor with capacitance values of 5 pF to .027 µF. Filter is suited for products used in microwave frequency spectrum including oscillators, attenuators, and synthesizers.

ITT Interconnect Solutions    Santa Ana, CA 92705
Dec 09, 2011 Featuring 24-spring probe and pad contact technology, Filter Spring Probe Series extends operating life of in-the-field military equipment. Technology creates electrical contact by utilizing pressure-point force on spring-loaded pin to contact pad, instead of sliding forces found on conventional pin socket contacts. Flush with mating face of connector, contact pad on receptacle side of connector can be cleaned by wiping interface, making interconnect suited for field applications.

PREMO Group    Barcelona   Spain
Nov 28, 2011 Suited for applications with max operating voltage up to 720 Vac, HCWMGF Series comes in 3-phase versions L1, L2, and L3 (without neutral) from 150-2,500 A, with power losses less than 0.02%. Units offer dielectric strength above 3,000 Vdc and insertion loss above 40 dB in entire range, reaching 80 dB between 200 kHz and 1 MHz. With UL94 V2 flammability rating, filters are suited for renewable energy equipment, UPS systems, and power inverters.

Murata Electronics North America, Inc.    Smyrna, GA 30080
Nov 04, 2011 Aimed at 2.4 GHz applications, Model LFB182G45BG2D280 is designed specifically for use with CC253x and CC254x wireless connectivity system-on-chips from Texas Instruments Incorporated for ZigBee and Bluetooth technology networking, respectively. Measuring 1.6 x 0.8 mm, device incorporates all necessary RF circuitry of matching network, balun, and filter within single package.

Mini-Circuits    Brooklyn, NY 11235
Oct 24, 2011 Intended for instrumentation purposes, ZX75-BS series is comprised of microwave filters designed to meet needs of customers with requirements spanning 54-140 MHz. Products offer typical stopband rejection of 45 dB and are built for consistent performance, lot to lot and across temperature range. Each filter comes in metal case with 50 ohm SMA connector.

Spectrum Control, Inc.    Fairview, PA 16415
Sep 29, 2011 Designed to displace traditional metal connector shells for substantial weight reduction, Circular Connectors with composite shells are available in MIL-38999 series III and IV, in both EMI filtered and unfiltered versions. Composite shell maintains form, fit, and function of original shell, making connectors suitable for weight-critical applications in military and aerospace industries.

Mini-Circuits    Brooklyn, NY 11235
Sep 23, 2011 Using combinations of lumped and distributed elements in 3D ceramic structure, BFCN products cover frequencies from 7,100-8,750 MHz. Products come in 1206 package format and offer designs with up to 5 sections and DC isolated I/O. These Low-Temperature Co-Fired Ceramic (LTCC) components feature conductive metallization in multi-layer structure. They enable realization of various RF building blocks: inductors, capacitors, broadside, and edge-coupled lines.

ON Semiconductor, LLC    Phoenix, AZ 85008
May 31, 2011 Supporting data speeds to 3.4 Gbps, silicon-based EMI2121 (single pair), EMI4182, (dual pair) and EMI4183 (triple pair) offer common mode rejection of 15 dB typ at 500 MHz and insertion loss of 1.0 dB typ at 500 MHz. Integrated ESD protection, which meets peak discharge of 15 kV per IEC61000-4-2, and differential mode bandwidth cutoff frequency optimize signal integrity. CMFs protect high-speed differential ports using MIPI DSI/CSI2, USB 2.0, and HDMI interface standards.

Mini-Circuits    Brooklyn, NY 11235
May 24, 2011 Suited for wireline broadband access applications, Model ZBPF-75 features fractional bandwidth of 32% and ultimate rejection of 30 dB typical from 50-800 MHz. Housed in rugged shielded case measuring 2.0 x 2.0 x 0.75 in., 50 W Model ZBPF-75-1+ has passband range of 63-87 KHz with optimized passband IL, roll-off, and rejection.

Schurter, Inc.    Santa Rosa, CA 95403
May 02, 2011 Intended for 1-phase systems, Series FMBB NEO is characterized by high symmetrical and asymmetrical attenuation. Design C attenuates potentially strong conducted interferences, while Design D is laid-out for attenuation of high frequency interferences, and Design F is suited for low frequency noise attenuation. Family is rated 1-36 A, according to IEC and 125/250 Vac, 1-30 A according to UL/CSA. Types with quick connect terminals or with bolts and nuts, style M4, are offered.

PREMO Group    Barcelona   Spain
Mar 22, 2011 Installed between PV inverter and solar panel, FEDC series allows EMC standards compliancy for entire PV system and helps prevent pre-mature panel aging. Series is designed to reduce conducted emissions towards solar panel and reduce EMI radiations from solar panel, increasing solar panel lifetime and installation service life. Ratings range from 25-1,500 Adc; up to 150 Adc without terminals and up to 1,500 Adc with screw connections.

PREMO Group    Barcelona   Spain
Mar 17, 2011 Installed between inverter and solar panel, FEDC series ensures compliance with EMC standards for entire PV system by reducing conducted emissions towards solar panel and EMI radiations from solar panel. Product is available with ratings from 25-1,500 Adc, without terminals up to 150 Adc, and with screw connections up to 1,500 Adc. While meeting EN60939, UL1283, and RoHS requirements, series has max operational voltage of 1,200 Vdc and is available without filter capacitors to ground.

AVX Corp.    Myrtle Beach, SC 29578
Feb 24, 2011 Featuring miniature surface mount design, LC T configured FeedThru Filters provide design engineers with consistent broadband EMI filtering for critical drive by wire applications such as throttle and braking. AEC Q200-qualified units typically provide -30 dB of attenuation across 300 MHz frequency spectrum. Response can start as low as 75 MHz or end as high as 1,500 MHz. Current ratings range from 2 A steady state in 0805 package to 5 A steady state in 1206 package.

STMicroelectronics    Lexington, MA 02421
Feb 16, 2011 Model ECMF02 single-channel IC and ECMF04 two data-channel unit combine common-mode filtering, which prevents data errors caused by EMI, and ESD protection needed by high-speed data lines. Measuring 0.55 mm high, Integrated Passive and Active Device (IPADT) products feature 6 GHz differential bandwidth, and common-mode attenuation of -34 dB at 900 MHz and -20 dB between 800 MHz and 2.2 GHz. They are suited for smartphone, tablet, and mobile computer circuits, as well as for USB 2.0 and HDMI.

Crystek Corp.    Fort Myers, FL 33907
Feb 02, 2011 Suited for use in broadband coupling and test and measurement applications, CBLK DC Blocks are designed to block DC voltage while passing frequencies from 300 kHz to 3 GHz. Units produce flat frequency response and offer low insertion loss of 0.02 dB at 300 KHz and 0.20 db at 3 GHz. DC input voltage is rated at 16 WVdc max and operating temperature range is -55 to +90°C.

Gaia Converter, Inc.    St. Laurent, QC H4S1W2
Jan 12, 2011 Model FGDS-2A-50V is rated from 4-50 W at up to 2 A input current and measures 35.5 x 20.5 x 10.7 mm, while FGDS-10A-50V, rated from 50-150 W at up to 10 A input current, is housed in 40.8 x 27 x 12.7 mm package. Measuring 40.8 x 27 x 16.5 mm, model FGDS-20A-50V is rated from 150-300 W at up to 20 A input. All modules withstand transient and spike requirements of MIL-STD-704A and MIL-STD-1275B, operate in all harsh environmental conditions, and do not need heatsink for dissipation.

Spectrum Advanced Specialty Products    Fairview, PA 16415
Nov 10, 2010 Featuring miniature case size of .156 in. OD x .128 in. ID with body length of .200 in. and overall length of .715 in., L Circuit EMI Filter is suited for microwave and RF applications. Hermetically sealed, feed-through solder-in unit provides filtering from 10 kHz to 10 GHz, with 10 pF to 0.033 µF capacitance, 10 A current rating, and voltage ratings from 50-200 Vdc. Monolithic capacitor construction with glass seal on one end provides extra protection from harsh environments.

Pulse Engineering, Inc.    San Diego, CA 92128
Sep 30, 2010 Model CX5060 filter passes cable television (CATV) Docsis 3.0 signals, blocks multimedia-over-coax signals, and provides RFI shielding and surge protection within weatherproof metal housing. Unit's pass band frequency is from 5-1,002 MHz with impedance of 75 W and provides over 40 dB of insertion loss in 1,125-2,300 MHz frequency range. Operating over temperatures of -40 to +85°C, compact product suits side-of-house outdoor applications for CATV service suppliers.

Schurter, Inc.    Santa Rosa, CA 95403
Sep 03, 2010 Characterized by high symmetrical and asymmetrical attenuation, FMBB NEO Series includes Design C, which attenuates potentially strong conducted interferences; Design D, which handles high frequency interferences; and Design F for low frequency attenuation. Units are dimensioned as 250 Vac filters with rated current of 1-36 A according to IEC and 125/240 Vac, 1-30 A according to UL/CSA. Applications include frequency converters, stepper motors, UPS systems, and current converters.

Spectrum Advanced Specialty Products    Fairview, PA 16415
Aug 25, 2010 Designed to provide inductance and series resistance for optimal transient performance, L circuit EMI filter has .156 in. OD, .128 in. ID, and .200 in. body length. Total overall length is .715 in., and monolithic capacitor construction features glass seal on one end. Feed-through, solder-in filter, suited for microwave and RF applications with space concerns, provides filtering from 10 kHz to over 10 GHz, with 10 pF to 0.033 µF capacitance values and 10 A and 50-200 Vdc ratings.