|
|
|
|
|
Communication Systems & Equipment
(Showing headlines 4181 - 4200) << 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224
|
Serial-Ethernet Converter supports Dynamic DNS and PPPoE.Sena U.S.A,
San Jose, CA 95134
Sep 11, 2003 Linux-based HelloDevice SS100 employs 32-bit processor, embedded web server, and open Linux platform. It supports RS232/422/485 serial communication, allowing most asynchronous serial devices to be accessed over network via its DB9 serial port. Converter handles serial data transfer rates up to 230 kbps, supports TCP/UDP-based communication modes, and includes modem emulation mode, status monitor, error log monitor, and IP address filtering. |
 Serial-to-Ethernet Converter supports TCP/UDP based modes.Sena U.S.A,
San Jose, CA 95134
Sep 08, 2003
Wireless HelloDevice Super Series manages RS232/422/485 based serial devices over network with features such as PCMCIA interface, flexible host mode, security, and event handling. Units present modem interface to serial device in modem emulation mode, accept AT modem commands, and make raw RS-232/422/485 data travel across local LAN. They run embedded Linux OS and support SSLv2, SSLv3, and TLSv1 for secure data communication.
|
 Serial-to-Ethernet Converter features 3DES data encryption.Sena U.S.A,
San Jose, CA 95134
Sep 08, 2003 HelloDevice Pro Series manages RS232/422/485-based serial devices over network. It provides IP address filtering to protect unintentional data streams from being transmitted to serial device. Static key-based 3DES data encryption promises secure data communication. Series supports open network protocols such as TCP/IP, UDP, and PPPoE allowing serial devices to be accessed over DSL-based broadband network or LAN environment. Units transfer serial data up to 115 kbps. |
 Video Converter is packaged for outdoor use.Sensoray
Tigard, OR 97223
Sep 08, 2003
Controlled via Web browser, Model 2412SYS video-over-IP streaming solution converts PAL or NTSC video into 802.11b stream using UDP or RTP Ethernet protocol. Built-in directional antenna ensures unit-to-unit outdoor range of up to 1 mile. System accepts input power from 10-36 Vdc and draws 6 W for one video channel. Bit rate from MPEG-2 codec can be reduced to as low as 500 kbits/s to minimize bandwidth. Serial port can relay PZT commands to a camera.
|
 Wi-Fi Module adds LAN connectivity.DPAC Technologies
Garden Grove, CA 92841
Sep 05, 2003 Airborne™ fully integrated Wi-Fi module includes radio, base-band processor, application processor, and software to provide LAN and Internet connectivity to non-consumer electronic applications. Measuring 38 x 27 x 12 mm, module is easily embedded into existing designs and is interoperable with 802.11b access points. Equipment with embedded Airborne module can be monitored and controlled by handheld device, PC in central location, or over Internet. |
Intelligent I/O Adapters suit telephony applications.IBM (Corporate Headquarters)
Armonk, NY 10504-1783
Sep 04, 2003 Quad Digital Trunk Telephony PCI Adapter and IBM Quad Digital Trunk Telephony PCI Blind Swap Adapter offer flexible network connectivity. Full-length, universal PCI 2.2-compliant adapters perform voice processing for up to four T1 or E1 trunks, providing connectivity to 96 T1 or 120 E1 voice channels in one PCI slot. Voice processing function is provided by WebSphere® Voice Response for AIX® LPP with Direct Talk Technology. |
Voice Response Software supports PCI telephony adapter.IBM (Corporate Headquarters)
Armonk, NY 10504-1783
Sep 04, 2003 WebSphere Voice Response for AIX® v3.1, with DirectTalk® Technology, supports operation with Quad Digital Trunk PCI Telephony Adapter. Full size, 32-bit or 64-bit adapter allows pSeries™ computers to be connected to telephone network and permits voice processing using digital signal processors. One adapter supports up to 4 T1 or E1 digital trunk interfaces and provides 4 RJ-45/RJ-48C sockets for connecting user-supplied cables. |
 Multimeter features dual display with 50,000 count accuracy.B & K Precision Corp.
Placentia, CA 92870
Sep 03, 2003 Utilizing standard 115 Vac outlet as power source, PC-compatible Model 5491A Bench DMM measures DCV, ACV, DCA, ACA, Frequency, and Diode Continuity. True RMS measurement bandwidth is 30 Hz to 100 KHz. Unit can measure resistance up to 50 Mohm with 10 Mohm resolution, frequency up to 500 KHz with 0.01 Hz resolution, and dBm with variable reference impedance from 2–8,000 ohms. It includes Display Hold, RS-232 interface, and Compare function for in-tolerance testing. |
Multiprotocol Transceiver supports 8 different protocols.Sipex Corp.
Miliptas, CA 95035-1701
Aug 29, 2003 Capable of data rates up to 20 Mbps, Model SP3508 single-chip transceiver enables data communications between nodes in Wide Area Network applications. Through operating power supply of 3 V, TTL I/O lines are conditioned to LVTTL signal levels. Device incorporates intelligent charge pump, 8 transmitters, 8 receivers, and 1 µF charge pump capacitors. It operates in DTE or DCE mode and includes internal line loopback for diagnostic testing. |
 Integrated Circuit acts as replacement for RF receivers.Micrel Semiconductor Inc.
San Jose, CA 95131
Aug 22, 2003 Offered as alternative to discrete superregen receivers, QwikRadio™ MICRF008 RF receiver eliminates need for production tuning. Product incorporates sweep mode, which enables superheterodyne receivers to sweep RF bandwidth wide enough to emulate capture bandwidth of superregen receivers (9 MHz). Offered in 8-pin SOIC packaging, product has 300–440 MHz frequency range, 4.8 kbps max data-rate. |
Switching Devices feature glass and plastic design.Omron Electronics, LLC
Schaumburg, IL 60173
Aug 20, 2003
The 2 x 2 and 1 x 8 Fiber Optic Switching Devices come in small MEMS-scale package and consume 100 mW. Variable optical attenuator with indicator incorporates ultra-miniature actuator technology, while 4-channel multiplexer/demultiplexer unifies optical elements into single unit. Twelve channel multimode interconnect is also available. Devices are suited for access area applications where fiber optic cables deliver communication access to homes and businesses.
|
 CAN Module features Bluetooth interface.IXXAT Automation GmbH
Weingarten D-88250 Germany
Aug 14, 2003
CANblue allows wireless connection of PC or notebook with Bluetooth interface to CAN system. Maximum distance between PC and CAN system can be up to 100 m, depending on spatial conditions. Module features 16-bit microcontroller system, 128 k flash, and 128 k RAM. For connection to CAN system, CANblue has SJA1000 CAN controller and bus interface. Operation with 11 and 29 bit identifiers is supported as well as baudrates up to 1 Mbit/sec.
|
 Wireless Transmitter works with bridge based sensors.Sensotec, Inc.
Columbus, OH 43228
Aug 12, 2003 Model WTB battery-powered, wireless transmitter for use with Honeywell-Sensotec bridge based sensors simplifies testing, measurement, and automation by eliminating hookup of cables and sensing devices. Based on PWM technology, system features up to 1000 Hz frequency response for data transmission over line-of-sight distances up to 300 ft. Product operates in 900 MHz ISM radio band and does not require FCC licensing. Analog output is ±5 Vdc. |
PC Card Adapter acquires CAN messages in real time.Contemporary Control Systems, Inc.
Downers Grove, IL 60515
Aug 12, 2003 Model ICPCM-CO enables OEMs to instantly connect all CAN networks to notebook computer. It features 128 kB onboard CAN buffer for use on high-speed CAN networks and 2 kB dual port RAM for high-speed data exchange between card and attached PC. Unit is outfitted with SJA1000 CAN controller chip, offering full range of data rates up to 1 Mbps. It includes listen-only mode and support for 11-bit and 29-bit identifiers. |
 Power Quality Meter complies with EN50160 standards.Electro Industries/Gaugetech
Westbury, NY 11590
Aug 11, 2003 Nexus 1252 performs flicker analysis, which can be damaging to equipment and humans. It provides interharmonic analysis, with logging and monitoring for short- and long-term evaluation. Incorporating DNP 3.0 protocol, unit maps up to 136 measurements to DNP Static points. Up to 16 relays and 8 resets are controlled through DNP. Meter offers high-speed transient recording, fault recording, and voltage surge and sag recording at up to 512 samples/cycle. |
 Receiver simplifies alignment of access points and bridges.Berkeley Varitronics Systems
Metuchen, NJ 08840-1217
Aug 08, 2003 Beetle™ 802.11b Receiver with antenna alignment kit allows for antenna alignment of point to multi-point solutions. Product comes with hardware and software for surveying and optimizing STAs (Client Cards) as well as Access Points. Product measures correlated signal strength, Packet Error Rate, and power output from base stations with in-line attenuation. Unit also captures all MAC addresses on 14 channels. |
 Video Measuring System offers stage scale resolution to 0.01µm.Nikon, Inc. Instrument Group Div.
Melville, NY 11747
Aug 07, 2003
NEXIV VMR-H3030 utilizes VMR-Z120X Maximum Magnification Module with magnifications from 36-4,320x. Through-the-lens laser focusing system allows user to scan complex profiles of 3D precision parts at 1,000 points/sec. The 15x Telecentric Zoom System facilitates searches at low magnifications. Software provides intelligent search functions that eliminate possible measurement errors, and multi-pattern search function, which automatically corrects part-to-part variations.
|
Wireless Serial Adapter is O/S independent.Digi International
Minnetonka, MN 55343
Aug 06, 2003 Wavespeed™/S utilizes Bluetooth™ technology to connect peripheral devices wirelessly. It offers instant EIA-232 serial cable replacement to increase user mobility. Secure communication is provided via encryption, authentication, and adjustable transmit range. Distance between peripheral device and host can be up to 328 ft for Class 1 radio, or 32 ft with Class 2 radio. Wavespeed/S can connect to any serial port with no changes in host PC or application software. |
 Switch Modules track/store number of relay cycles in system.National Instruments Corp.
Austin, TX 78759-3504
Aug 04, 2003 Models NI PXI-2593 and NI SCXI-1193 RF switch modules offer 16 channels in PXI and 32 channels in SCXI, 500 MHz bandwidth, 50 ohm characteristic impedance, 10 W RF carry power, 150 V CAT I switching, and MCX direct connectivity. Models NI PXI-2566 and NI SCXI-1166 general-purpose switch modules offer 16 independent SPDT relays in PXI and 32 in SCXI. Modules also feature switching capacity of 2 A switching/5 A carry and 150 Vdc/125 VAC CAT I. |
 Handheld Communicator has intrinsic safety certification.Meriam Instrument
Cleveland, OH 44102
Jul 31, 2003 Suited for use in hazardous environments, MFC4100 documenting HART® communicator and configurator does not require explosion-proof housing. It has dedicated flash memory for 600 device descriptions and dedicated non-volatile memory for storing over 200 average size device configurations. Other features include alphanumeric keypad, backlit display, configuration cloning, and HART diagnostics. Off-line mode is offered for developing/reviewing configurations. |
(Showing headlines 4181 - 4200) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224
|
|
|