Argonics, Inc.
Marquette, MI 49855
Jun 16, 2009 Eraser V6 Profile blade features optimized attack angle, allowing for consistent wear over life of blade and eliminating flat spotting. Features include inner ratchet catch manufactured of aluminum, and blade insert that creates stable platform for mounting blade to cleaner system. Perma-Torque tensioner incorporates embedded hex rod with rounded end and radii on all sharp corners. Durable power coat finish provides corrosion resistance in field.

J. W. Winco, Inc.
New Berlin, WI 53151
May 28, 2009 Desaigned for clearing debris from T-slots on milling machines or rotary T-slot tables, Series 6485 scrapers are offered in 2 sizes to fit either 14-20 mm slots or 22-32 mm slots. They feature blade made of hardened chrome-vanadium steel, with handle of same material for smaller version, and black and red cadmium-free plastic handle for larger version.

K-Tool International
Wixom, MI 48393
Nov 19, 2007 Used to apply materials such as adhesive, filler, compound, and spackle, each scraper in this 4-piece set has polished, mirror-finished, hardened steel, full-tang blade. They also feature grommeted brass, solvent-resistant, riveted wood handle. While 1 and 3 in. scraper widths are, respectively, available for stiff and flexible edge blades only, 1½ in. width is available for stiff and flexible edge blades. Scrapers can also remove paint, rust, gaskets, carbon, filler, and undercoating.

Unger Enterprises Inc.
Bridgeport, CT 06610
Jun 20, 2007 Designed for cleaning professionals, ErgoTec Glass Scraper safely removes dirt from glass and other surfaces. Handle features non-slip rubber overlay and ergonomic bi-component grip that promotes firm handling even in cold or wet conditions. Available in 4 and 6 in. head sizes, scraper uses double-edged blades that can be changed by pushing blade release. Clip-on protective cap can be used when scraper is not in use to provide worker safety.

Steck Mfg. Co., Inc.
Dayton, OH 45408 1952
Aug 24, 2006 EZ Scraper Tool (P/N 71515) provides body technicians and mechanics with means to perform straight push scraping as well as gouge-free pull scraping for paint, sealant, and/or gasket removal. This mirror-finished, dual-edged, stainless steel scraper measures 9 in. long and incorporates 90° right angled edge. Able to be resharpened, multiple use tool handles tough adhesive items and can also serve to separate engine components.

E-Components & Chains Limited
Pocklington, York YO42 1NR  United Kingdom
Dec 15, 2005 Manufactured from high-impact, food contact approved plastic, Detectamet Flexible Hand Scraper includes tapered leading edge for optimal cleaning and removal of foreign bodies. It is detectable and rejectable by metal detection systems used throughout food and pharmaceutical industries, and can be used in environments ranging from -30 to +80°C. Lightweight, impact-resistant scraper is available in blue, yellow, green, and red.

Paul N. Gardner Co., Inc.
Pompano Beach, FL 33060 6608
Oct 20, 2005 Little Joe ADM, used to obtain consistent draw downs on grind gages and draw down pads, offers smooth, motorized scraper movement. Scraper is rigidly held at 85° angle, allowing use of each side twice; 90° versions are available. Consistent scraper force is adjustable from 3.5-13 lb, and speed is adjustable from 1-10 sec. Suited for use with liquid and paste coatings, machine removes operator variables and uses existing grind gages and scrapers.

GEI International, Inc.
Syracuse, NY 13217 6849
Apr 14, 2005 Available in 7 models with blade lengths from 3.5–14 in., Industrial Scrapers have no welds to break and withstand demanding applications. Made from hardened and tempered spring steel, blades will not twist in scraper blade holder and are secured by bolt and lock nut to facilitate replacement. Weight of scraper is concentrated close to blade for heavy-duty scraping action. Non-Sparking units are bronze and aluminum with hardened and tempered bronze blades.

General Equipment Co.
Owatonna, MN 55060 0334
Feb 27, 2003 Model FCS16 Rip-R-Stripperâ„¢, equipped with ¾ hp, 115/230 Vac, 60 Hz electric motor, removes carpet, ceramic tile, linoleum, and mastics. With exciter unit mounted directly to driveshaft, scraper uses downward force to bore into and strip away covering. Back-Saverâ„¢ blade control system allows infinite adjustment of blade angle during use. Adjustable handle height prevents lower back strain. Handle-grip configuration optimizes wrist strength and reduces fatigue.

Trelawny Pneumatic Tools
Malvern, PA 19355
Oct 04, 2002 Breaker, with 5 ft handle, removes ceramic tile, thin set mortars, and other difficult materials. Lower grip on handle can be adjusted to comfortable position. Breaker features 2 in. stroke combined with 2 in. bore for difficult scraping and chipping applications. Air consumption is 20 scfm @ 90 psi. Chisels are available in 1, 2, and 3 in. wide sizes. Single-ball retainer provides quick tool change and positive, safe lock.

Aldon Co., Inc.
Waukegan, IL 60087 3218
Aug 21, 2002 LONG REACH consists of heat-treated aluminum scraper paddle and 6 ft long aluminum pole extensions that snap together. Paddle is 5 in. wide with chisel edge. Pole/paddle assembly measures 24 ft long and weighs only 10 lbs. It is suitable for scraping hopper-car, tank-car, and storage-bin interiors.

Thomas C. Wilson, Inc.
Long Island City, NY 11101
Jul 18, 2002 As Expanding Brush and Expanding Scraper spin, centrifugal force raises floating brushes or floating scraper blades so they conform to tube's ID, even if ID changes along length of tube. As brushes and scrapers wear, they raise more to conform to tube's ID. Applications include cleaning boilers, heat exchangers, condensers, chillers, steam generators, and pressure vessels. Brush cleans tubes up to 2 1/2 in. OD, while scraper handles tubes up to 6 1/2 in. OD.

Trelawny Pneumatic Tools
Malvern, PA 19355
Jul 08, 2002 Long reach Python removes tile, carpet, glues, resins, and other similar materials. Ergonomic design provides optimum angle of approach to floor surfaces and eases back strain. Vibration isolated handle further adds to operator comfort. It can be equipped with 1, 2, or 4 in. chisels or 4, 8, or 12 in. scrapers. Single ball retainer provides quick attachment change and positive locking of tool. It consumes 8 scfm @ 90 psi.

GEI International, Inc.
Syracuse, NY 13217 6849
Mar 12, 2002 All-metal industrial scrapers have no welds to break, and concentrate their weight toward blade. Up to 9 lb weight enables scrapers to be used as wrecking or demolition tools. Hardened and tempered spring-steel scraper blades are secured by bolts and lock nuts for replacement, and do not twist in scraper-blade holder. Blade lengths range from 3.5 to 14 in. Non-Sparking scrapers, manufactured from bronze and aluminum, are also available.

Allway Tools, Inc.
Bronx, NY 10462
Nov 14, 2001 Model CS6 Contour Scraper Set is equipped with 6 stainless steel blades, each with different contours at either end, for a total of 12 shapes. It can be used with chemical solvents or on dry surfaces. CS6's Santoprene handle offers a half-round mini-file for blade sharpening, held inside the handle's heel by 1 Neodymium magnet.