Grilles & Louvers

Architectural and Civil Engineering Products, Mechanical Components & Assemblies

FEMA-Rated Aluminum Grille protects storm shelters, safe rooms.

May 4, 2016

FEMA 320- or FEMA 361-rated for storm shelters and save rooms, XAV-545 withstands design loads of 300 psf produced by extreme wind phenomena. This AMCA-certified, 5 ½ in. aluminum grille, with free area of 49%, has been tested with impacts of 15 lb – 2 x 4s traveling at 100 mph per ICC 500. Compliant for wind borne debris in all regions of USA, solution suits buildings requiring protection against such violent weather as hurricanes and tornadoes. Read More

Architectural and Civil Engineering Products, Material Handling & Storage

Single Row Louvered Panel features 80 lb weight capacity.

February 23, 2016

Designed for use in areas where full panel will not fit, Single Row Louvered Panel creates additional storage space, putting storage around close spaces such as desk or workbench areas. Made of 16-gauge cold-rolled steel, wall-mountable panels can be placed side by side in continuous row. Read More

Architectural and Civil Engineering Products

Anchorless Louvers protect against wind-driven rain.

January 22, 2016

While featuring anchorless system that conserves time and simplifies installation by preventing need to penetrate wall, ECD-545-MD and ECV-645-MD provide performance needed in hurricane-prone regions across USA. Both models are listed for AMCA 540 (impact resistance) and AMCA 550 (high-velocity, wind-driven rain), and neither requires additional damper to pass AMCA 550. Both louvers also bear AMCA seal for water penetration, air performance, and wind-driven rain. Read More

Architectural and Civil Engineering Products

Vertical Blade Louver is hurricane zone approved.

January 13, 2016

Made of extruded aluminum, Model EVH-501D incorporates drainable head member and 5 in. deep vertical rain-resistant blades. Stationary louver is Florida Building Code Approved for use in High Velocity Hurricane Zone and Miami-Dade Approved for use where room behind louver is not designed to drain water penetrating into room or room will house non-water resistant or waterproof equipment. Product is also AMCA 550 and 540 Listed for High Velocity Rain Resistance and Enhanced Impact Resistance. Read More

Architectural and Civil Engineering Products, Material Handling & Storage

Louvered Panel Systems include plastic bins.

August 20, 2015

Available in 12 models, Louvered Panel Systems come complete with plastic bins as package. Systems have as few as 9 bins and range up to 165 bins on one single panel. Panels come with gray or Oyster White powder coat finish, while bins come in 7 different colors, including clear. By utilizing empty wall space, systems can expand storage capabilities. Read More

Architectural and Civil Engineering Products

White Louvered Panels support hanging bins.

August 14, 2015

Expanding line of Louvered Hanging Systems, Textured White Louvered Panels are available in 18 x 61, 36 x 61, 18 x 19, and 35 x 19 in. sizes. Louvered Hanging Systems securely support AkroBins®, InSight® Bins, and Universal Hanging Bins. Systems are made of heavy-duty, 16-gauge, cold-rolled steel for strength and durability. In addition to Textured White color, systems are also available in Gray and Beige powder-coated finishes. Read More

Architectural and Civil Engineering Products, Safety & Security Equipment

Stationary Acoustic Louver is Miami-Dade qualified.

July 16, 2015

Featuring 6 in. deep J blade, Model AFJ-601D is designed to restrict transmission of high and low frequency sounds generated by mechanical equipment and to act as exterior weather louver. Unit is Florida Building Code approved and Miami-Dade qualified for use in Wind-Borne Debris Zone as well as AMCA Licensed for Water Penetration, Sound and Air Performance. Louver can be specified with variety of options in broad array of architectural finishes. Read More

Architectural and Civil Engineering Products

Wind-Driven Louver carries Miami-Dade certification.

May 29, 2015

AMCA-rated for Air Performance and Wind-Driven Rain, ECV-645-MD 6 in. deep, vertical blade louver has free area of 46% and withstands extreme loads, debris impact, and cyclic fatigue associated with severe weather effects of hurricanes. Unit is approved by Florida Building Code and tested in accordance with AMCA 540 and 550. Facilitating and accelerating attachment to any substrate without mechanical anchors, optional anchorless installation utilizes flanged clips and retaining angles. Read More

Architectural and Civil Engineering Products, Material Handling & Storage, Mounting & Attaching Products

Louvered Panel Hooks afford flexible display customization.

May 18, 2015

Securely attaching to louvers to add flexibility and organizational customization to existing systems, 3 or 6 in. long metal Louvered Panel Hooks have chrome finish and come in 3 hook styles: straight post, wide loop, and narrow loop – to create diverse storage options. Hooks can be used to make shadow board for hanging tools and equipment, and design aids in organizing such oddly shaped items as sanding disks, tape rolls, and cords. Installation does not require any tools. Read More

Architectural and Civil Engineering Products, Material Handling & Storage

Heavy-Duty Wall Panels increase shop space storage capacity.

December 1, 2014

Suited for use in residential and professional shops, Premium Louvered and Pegboard Wall Panels are constructed of 18-gauge steel with powder coat finish, offer up to 200 lb load capacity, and come in 24 x 18 in., 24 x 24 in., and 36 x 18 in. sizes. Louvered Wall Panels can accommodate assortment of storage bins, while Pegboard Wall Panels provide secure storage and facilitated access to tools via included 10-piece Triton tool holder accessory kit.<br /> Read More

Architectural and Civil Engineering Products

Adjustable Blade Louver improves operation via drainable design.

November 3, 2014

Model EAD-635, along with 6 in. deep frame, incorporates drainable head member and adjustable drainable blades. When open, drainable blades provide resistance to water penetration and high volume intake and exhaust ventilation. When closed, optional dual durometer vinyl blade-edge gaskets and stainless steel jamb seals minimize air leakage and water penetration. Blades support control via manual hand-cranks, pull chains, and electric or pneumatic actuators. Read More

Architectural and Civil Engineering Products

Severe-Duty Aluminum Louver has FEMA-compliant design.

September 19, 2014

Featuring AMCA seal for water penetration and air performance, 5.5 in. deep Model AFL-501 protects exterior wall penetrations on FEMA 361 or 320 compliant storm shelters or safe rooms. Inverted V style blades lend to high free area, water penetration resistance, and minimal airflow resistance while maximizing protection against wind loads (up to ±300 PSF) and wind-borne debris. UL-Classified wind-storm rated assembly passes ICC 500 debris impact standard of 15 lb, 2 x 4 traveling at 100 mph. Read More

Architectural and Civil Engineering Products

Aluminum Louver features vertical rain-resistant blades.

January 21, 2014

AMCA Licensed for Water Penetration, Air Performance, and Wind-Driven Rain, Model EVH-501 is designed to protect air intake and exhaust openings in building exterior walls from direct water penetration, even in most extreme weather conditions. Design incorporates drainable head member and 5 in. deep vertical rain-resistant blades. Manufactured of extruded aluminum, louver can be specified with variety of options in broad array of architectural finishes. Read More

Architectural and Civil Engineering Products, HVAC, Mechanical Components & Assemblies

HVAC Linear Bar Grille offers seamless installation.

January 16, 2014

Available in aluminum, bronze, and stainless steel, Jbead Frame/Grille features fully welded, one piece design with no unsightly rivets or surface welds. Flange provides multiple recessed capture areas for plaster, while step enables finishers to smoothly apply initial coat and final skim coat. Accommodating wall thicknesses from ¼&ndash;¾ in., grille has pre-punched holes designed to accept standard wall board screws with spacing to accommodate any wall condition. Read More

Architectural and Civil Engineering Products, Mechanical Components & Assemblies

Security Grille combines safety and long-term operation.

November 12, 2013

Available in straight lattice and optional brick patterns, RapidGrille&trade; Advanced Performance (AP) Model 676 industrial and commercial security grille serves applications requiring security and minimized interruption to access without compromised aesthetics or air exchange. Spring-less design minimizes maintenance requirements as well as disruptions to operations, and safety features include built-in stop-lock brake, reversing/sensing edge, and photoelectric sensors. Read More

Architectural and Civil Engineering Products, Communication Systems & Equipment, Electrical Equipment & Systems, Green & Clean

Recessed Linear Lighting is suited for video teleconferencing.

August 23, 2013

Designed to fit standard 6 in. wide, built-in utility channels in all-modular, flush-mounted gypsum ceiling systems, architrave6 ceiling luminaires deliver controlled-glare, evenly distributed, direct downward ambient illumination. Linear design, with dual-sided, asymmetric matte parabolic louvers, is available with single-tube T5 standard or T5HO fluorescent lamping. Made of 60% recycled aluminum extrusions, housings are 100% recyclable and have powder-coated finish.<br /> Read More

Architectural and Civil Engineering Products, HVAC

Filter Fans and Exhaust Grilles optimize enclosure climate.

July 2, 2013

By channeling outside air into enclosure and expelling heated internal air, STEGO Filter Fans and Exhaust Grilles reduce interior temperature, preventing localized heat pockets and protecting electronic components from overheating. Filter fans are available in 120 Vac or 24 Vdc models and both indoor and outdoor versions ranging from 12&ndash;373 cfm. Exhaust grilles, featuring no-screw installation, are also available in indoor and outdoor models with lockable protective cover. Read More

Architectural and Civil Engineering Products

Wind-Driven Rain Louver features vertical blade design.

April 10, 2013

Constructed as 6 in. deep extruded aluminum louver designed with vertical rain resistant blades, Model EVH-660D is certified in accordance with Miami-Dade NOA 12-0418.06 and also passes Miami-Dade TAS 100A wind-driven rain test procedure without requiring damper. Product has AMCA Seal for Water Penetration, Air Performance, and Wind-Driven Rain, passes AMCA 540 Large Missile Impact Standard, and is AMCA-Listed as High Velocity, Rain Resistant, and Impact Resistant Louver. Read More

Architectural and Civil Engineering Products

Greenheck Louvers Achieve AMCA Listings for Impact and Rain Resistance

January 10, 2013

Greenheck is the first mechanical louver manufacturer to have louver products AMCA Listed as Impact Resistant Louvers and AMCA Listed as High Velocity Rain Resistant and Impact Resistant Louvers. The AMCA Listing designation is relative for louvers that are applied within the designated Hurricane Prone Regions, which includes, but is not limited to, Florida as required by the new Florida... Read More

Architectural and Civil Engineering Products, Material Handling & Storage, Plant Furnishings & Accessories

The 5S Hybrid Hanging Panel System

December 12, 2012

Improving the efficiency and quality of the work environment.<4444>The only 5S multi-functional panel system that serves to organize a multitude of items, varying in shape, size and weight on a single surface with a specific place for each while ensuring visual identification (non-permanent).<4444>On a single panel it's possible to combine round hooks (for small and/or light articles), "spike"... Read More