SureCrete Design Products
Dade City, FL 33523
Oct 05, 2009 Xtreme Lightweight Series is blend of cement with lightweight aggregates and reinforcing fibers. Fireproof, termite-proof, and mold-resistant, it can be cut, trimmed, nailed, molded, and formed into any shape. Product also allows any finish or any texture of wood or stone to be simulated; it attaches to gypsum, wall board, and concrete block, wood, and metal and can be stained, painted, or colorized throughout mix.

Forta Corporation
Grove City, PA 16127
Mar 11, 2009 Asphalt reinforced with FORTA-FI(TM) exhibits reduced rutting and cracking for extended longevity. Requiring no additional equipment or modifications in placement/compaction practices, fibers distribute uniformly and evenly within seconds when mixed in drum or batch plants. Material contains aramid and polyolefin fibers as well as other materials known for their strength, durability, and binding properties. Hot and Warm Mix Asphalt as well as hot/cold patch formulations are available.

CertainTeed Corp.
Valley Forge, PA 19482-0860
Feb 10, 2009 Suited for residential and commercial applications, GlasRoc® Tile Backer provides moisture- and mold-resistance for walls, ceilings, and countertops in wet as well as non-wet installations. Embedded Glass Reinforced Gypsum technology combines reinforcing glass mats, fully-embedded into water-resistant gypsum core, and gray textured acrylic coating on surface. Able to be scored and cut with standard utility knife, product provides flat and uniform substrate that resists delamination.

Georgia-Pacific Corp.
Atlanta, GA 30303-1801
Jan 05, 2009 Used in construction of high-occupancy buildings, Dens(TM) DensArmor Plus® interior panels contain embedded fiberglass mesh to provide impact and abuse resistance. They achieve level 3 for surface abrasion and soft body impact testing (ASTM C 1629) as well as level 2 for hard body impact resistance and level 1 for indentation resistance. Installed with standard drywall tools and fasteners, noncombustible (ASTM E 136) panels are also resistant to warping, rippling, and buckling.

CertainTeed Corp.
Valley Forge, PA 19482-0860
Oct 08, 2008 ProRoc® Moisture and Mold Resistant Setting Compound is formulated for use in all stages of finishing, including filling joints, embedding fiberglass mesh joint tape, and concealing joints, fasteners, and trim accessories. Plaster-based product can be sanded when dry and is mold-resistant. Mold-X10 Mold Resistant Mesh Tape is fiberglass mesh that is self-adhesive. Complimenting ProRoc® Gypsum Board, both create finishing system for interior walls in residential/commercial applications.

Target Technologies International
Burnaby, BC V5A3H4
Aug 27, 2008 Combining naturally occurring infill granules with ceramic coating, PermaCoat Naturally Tough Infill offers eco-friendly alternative for artificial turf infilling. Product is lead and heavy metals free, and manufactured without noxious solvents or chemicals. After curing, ceramic coating encapsulates granules making infill virtually dust-free and water resistant. Available in 2 standard UV stabilized colors, PermaCoat withstands extreme temperatures and is fire resistant.

Hacker Industries, Inc.
Newport Beach, CA 92660
Jan 25, 2008 Formulated for use in buildings with light-gauge steel framing and corrugated steel deck, FIRM-FILL® CSD(TM) poured gypsum concrete floor underlayment assists builders and developers in constructing safe and durable projects. It offers minimum compressive strength of 3,500 psi and dries in approximately 10 days. Under standard drying conditions, product sets in 2 hr and tolerates light trade traffic on following day. Product installs at 1 in. above top of steel deck flutes.

Georgia-Pacific Corp.
Atlanta, GA 30303-1801
Jan 23, 2008 Tested in accordance with ASTM E 330, DensGlass Gold® is suited for architects and builders concerned about construction schedules that might be delayed by adverse weather conditions. Exterior sheathing withstands winds in excess of 155 mph (Category 5 hurricane) and exhibits resistance to moisture and mold during and after construction. Mats facilitate handling of DensGlass Gold and also reduce required amount of primer needed for self-adhered membranes.

Superior Epoxies & Coatings, Inc.
Decatur, GA 30035
Oct 19, 2006 Featuring 100% solids formulation, chemical-resistant Superior Cove Kit is designed for vertical application at floor-wall joints to produce sanitary perimeter seal. This structural epoxy mortar, packaged in pre-measured kits to cover 35 lineal feet (4 in. vertical and 2 ft horizontal at 1/8 in.), requires clean surface prepared via sand blasting, water blasting, or other mechanical means. Each kit contains binder and blended aggregate in plastic mixing container.

Quikrete Companies
Atlanta, GA 30329
May 09, 2006 Contractor grade blend of Portland cement, hydrated lime, masonry sand, and other ingredients, QUIKRETE® Veneer Stone Mortar is available in standard gray or colored for use in mortar joint applications. Mortar formulation complies with ASTM 270 and ASTM C 387 requirements and is suitable as bonding coat to adhere stone to wall or as scratch coating applied over expanded metal lath. Polymer-modified and water-resistant formulation of product is also available.

ADMET
Norwood, MA 02062
Jan 23, 2006 Designed for measuring compressive strength of castable concrete, MegaForce II automatically controls rate of loading and testing of samples through programmable software. Comforming to American Society for Testing Materials specifications for concrete cylinders, cement cubes, cold crush, and concrete beam flexural strength, Megaforce II testing system is available on new machines and for retrofits.

Meadows, W.R., Inc.
Hampshire, IL 60140 0338
Feb 14, 2005 EVAPREâ„¢-RTU evaporation retardant forms thin monomolecular film to reduce rapid moisture loss from concrete surfaces prior to curing. VOC-compliant product minimizes plastic shrinkage and cracking, wind crusting, stickiness, and sponginess, which can cause poor and uneven surface texture. EVAPRE-RTU combats effects of rapid drying conditions such as low humidity, low dew point, direct sunlight, and hot weather. Protective film disappears when concrete is no longer plastic.

Meadows, W.R., Inc.
Hampshire, IL 60140 0338
Nov 08, 2004 SURE-STEPâ„¢ finely ground polymer material is added to concrete sealers for slip resistance. In addition to providing chemical and abrasion resistance, material is more comfortable to bare feet than sand or aggregate additives. Due to low density, SURE-STEP stays suspended in thin materials. It is packaged in 3.2 and 16 oz containers.

Garon Products, Inc.
Wall, NJ 07719 1924
Jan 26, 2004 Hy-Speed 500â„¢ emergency repair cement becomes a concrete-hard mass ready for traffic in 1 hr. It expands as it sets, becoming permanent patch that exhibits 3x strength of concrete. Product requires users to add water, mix, then pour. It needs no priming, leveling, or troweling and comes in 5 gal pails.

Devcon
Danvers, MA 01923
Dec 29, 2003 Resistant to chemicals and abrasion, heavy-duty Ultra Quartz(TM) is trowelable to smooth, nonporous finish and attains compression strength of 9,000 psi. It offers protection against acids, alkalis, water, oils, solvents, and other industrial chemicals. Product can be built up to 1 in. thick on damaged or pitted concrete floors and will not sag, drip, or run. This 100% solids, silica-filled epoxy putty cures at room temperature within 16 hr.

Meadows, W.R., Inc.
Hampshire, IL 60140 0338
Sep 11, 2003 SEALTIGHT® CS-309-25 consists of clear, transparent, ready-to-apply, non-yellowing, liquid compound that cures and seals freshly placed concrete. It provides impermeable seal for optimum moisture retention and minimizes hair-checking as well as premature cracking, dusting, spalling, and other defects. Product also resists adhesion of mortar droppings. Applications include sidewalks, patios, multi-level parking decks, driveways, and parking areas.

USG Corp.
Chicago, IL 60680-4678
Aug 01, 2003 READYROCKâ„¢ Liquid Gypsum and Liquid Composite are pre-mixed slurries that remain in liquid state indefinitely. When ready for use, READYROCK activator is added to slurry to begin setting process. Set times can be adjusted from 6 min to 2½ hrs by varying amount of activator. Both products offer dust-free solutions for statuary casting. Liquid Composite is for exterior, not-water-holding applications. Products are non-toxic, non-allergenic and odorless.

Meadows, W.R., Inc.
Hampshire, IL 60140 0338
May 06, 2003 SEALTIGHT LIQUI-HARD® Concrete Densifier and Chemical Hardener Compound consists of ready-to-use, colorless liquid that produces hardened, dust-proofed, and chemically resistant surfaces wherever it is applied. Through chemical reaction process, product penetrates through concrete, chemically solidifying all component parts into one homogenous concrete mass. It also eliminates dusting, rotting, and pitting, and prevents oxidation of iron aggregate floors.

Laticrete International, Inc.
Bethany, CT 06524 3432
Dec 05, 2002 LATICRETE® 333 Super Flexible Additive mixed with LATICRETE® 317 Floor N' Wall Thin-Set Mortar results in bond that is suitable for porcelain and difficult substrates such as ceramic tile, brick, stone, and glass mosaic. Bond withstands shock and vibration, reducing chance for cracked or loose tiles. Mixture cures quickly so area can be open to traffic within 24 hr of installation.

Randustrial Corp., A Pioneer Co.
Cleveland, OH 44135 4541
Apr 19, 2002 F-161 MAGIC FLOOR(R) provides permanent repair to indoor or outdoor floors. Application steps includes priming, spreading MAGIC FLOOR into cracks or holes, and compressing. Patch sets up and is immediately ready for traffic. Its shatterproof aggregate and thermoplastic binder material adheres to hard surfaces and hardener prevents tracking onto surrounding concrete.