pinta acoustic Inc.    Minneapolis, MN 55412
May 22, 2012 Available in custom sizes up to 4 x 10 ft, BALANCE Ceiling Clouds are composed of 11/16 in. thick WHITELINE panel with aluminum frame. Panel is available in white, black, and custom colors, and frame comes in natural aluminum and white. Offered with non-exposed or exposed 3/8 in. wide flange around perimeter, BALANCE Ceiling Clouds are Class 1 fire rated and have smooth surface with light reflectance of more than 87%.

Rautaruukki    Helsinki   Finland
Apr 03, 2012 Comprised of insulation layer between 2 color-coated steel sheets, Ruukki life panel is used in exterior walls of industrial, commercial, and logistics buildings to improve rating under LEED and BREAM assessment. Up to 80% of raw materials in mineral wool core of these steel sandwich panels is recycled. Steel sheets used in exterior and interior surfaces, as well as glass wool used as insulating material, are 100% recyclable.

Formica Corp.    Cincinnati, OH 45241
Mar 21, 2012 Suited for new builds and renovations, VIVIX® exterior facade panels provide lightweight rainscreen cladding solution that can also contribute to building's thermal efficiency. Panels act as defense against water penetration when installed as part of lightweight ventilated facade system and help prevent adverse effects of moisture on building's finish and structural components. Panels are manufactured using thermosetting resins reinforced with cellulose fiber.

Polycoat Products    Santa Fe Springs, CA 90670
Jan 30, 2012 Applied at 1/8-3/8 in. dry film thickness via trowel or slurry, PC-CRETE® U can be used to form containment beams or integral cove bases for seamless wall to floor protection as well as to slope floors in horizontal applications. This 3-part, heavy-duty, 100% solids, aromatic, cementitious urethane mortar system has textured matte finish and provides barrier against hydrostatic pressure and thermal shock. Return-to-service time is typically 4-6 hr.

H & F Manufacturing Corp.    Ivyland, PA 18974
Dec 07, 2011 Offering versatile design and color capabilities, Multi-Wall sheets provide glazing solution that creates open atmosphere and maximizes advantages of nature while protecting against its elements. Panels blend characteristics of polycarbonate with thermal advantages of multi-wall design. As insulating sheet for roofing, siding, glazing, advertising, and other architectural functions, flame-retardant product offers controlled daylight transmission and UV blocking layer.

H & F Manufacturing Corp.    Ivyland, PA 18974
Dec 06, 2011 Designed as exact match to metal R-Panel profile, Ultra R-Panel survives harsh weather, impacts, as well as corrosive chemicals and liquids. Heavy-duty panel, designed for new or retrofit siding or roofing applications for commercial, industrial, and residential structures, comes in clear, white opal (45% LT), and soft white (85% LT) versions. With noncombustible flame spread rating of 6, all versions are engineered to maintain color stability and light transmission.

CertainTeed Corp.    Valley Forge, PA 19482-0860
Jun 06, 2011 Easi-Lite(TM) 1/2 in. gypsum board features high-strength, sag-resistant gypsum core with recycled face and back paper and is suitable for both interior ceilings and walls in residential and commercial applications. Lightweight design makes product easy to transport and install and helps minimize workers' muscle strain and fatigue. It is also GREENGUARD® Children and Schools^SM certified and designated as low VOC emitting product.

Georgia-Pacific Gypsum LLC.    Atlanta, GA 30303
May 11, 2011 Conforming to applicable ASTM C 1396 standards, ½ in. ToughRock Paper-Faced Gypsum Panels offer sag resistance, enabling one product to be used for both walls and ceilings. Optimized flexural strength helps minimize breakage during handling and installation. Boards are GREENGUARD Indoor Air Quality Certified®, GREENGUARD Children and Schools^SM Certified, and listed in CHPS® High Performance Product Database as low emitting product.

SABIC Innovative Plastics    Pittsfield, MA 01201
Apr 18, 2011 Intended for use as stadium roofing, Ultra-Stiff Lexan(TM) Thermoclear(TM) sheeting has capability to withstand wind and snow loading pressures of up to 2,200 N/m² and wind speeds up to 125 mph. Multiwall configuration provides thermal insulation, and sheet helps contribute to LEED certification by providing natural light and possible recycled content. Solar Control infrared grades reduce build-up of interior heat in arenas while increasing natural light transmission.

Bamco, Inc.    Middlesex, NJ 08846
Apr 12, 2011 FABLOGIC(TM) includes C-500 models that feature silicone caulk joint, while G-500 models use recessed hard silicone gasket joints and full-length interconnecting perimeter extrusions. Model D-500 panels utilize rain screen technology and I-500 units have internal gaskets for weather sealing. Available in complex and curved shapes, all panels are 4 or 6 mm thick, up to 24 ft long, and up to 5 ft wide. They can be rear insulated and are tested and approved to ASTM and AAMA standards.

Solutia, Inc.    Saint Louis, MO 63166
Apr 06, 2011 With uniform neutral gray color and light transmittance of 61%, Vanceva® Ocean Grey interlayer can be used alone or layered with itself or other colors to create varying degrees of transparent, translucent, or opaque grays and rich deep hues of blue, red, and amber. When properly laminated and installed, laminates made with Vanceva Ocean Grey can be produced to meet or exceed architectural regulations for safety glazing applications in indoor and outdoor areas.

VAST Enterprises, LLC    Minneapolis, MN 55418
Feb 03, 2011 Manufactured in engineered composite of post-consumer recycled rubber and plastics, VAST Composite Detail Pavers facilitate and accelerate installation of curves and other paver patterns in walkways, building entryways, courtyards, terraces, and patios. They are 100% recyclable and designed to compliment 4 x 8 in. Composite Landscape and Permeable Pavers as well as 16 x 16 in. Installation Grids.

CertainTeed Corp.    Valley Forge, PA 19482-0860
Dec 22, 2010 Diamondback(TM) Tile Backer is reinforced with embedded glass mats for strength and moisture and mold resistance. It features polymer coating with textured surface that creates strong bond, helping to avoid tile slippage during installation. Eliminating need for moisture barrier, product can be used in bathrooms, kitchens, and other high-moisture residential and commercial interiors. Diamondback Tile Backer Type X is UL classified for fire resistance.

Pregis Corp.    Deerfield, IL 60015
Oct 15, 2010 Offering non-petroleum-based alternative for mounted applications, 100% paper-based Falconboard(TM) Mount provides rigid support structure for flexographic and rotogravure printed flexible wide-web materials. Product is made from post- and pre-consumer recycled fiber, and unlike corrugated backing boards, underlying cell structure is not visible. Available in widths up to 60 in. and thicknesses from 3/16-4 in., product resists bending or warping and is heat-resistant to 300°F.

Owens Corning    Toledo, OH 43659
Sep 23, 2010 Offering thermal stability and fire retardant properties, Uniconform® glass fiber mat contains no chemical binder, synthetic core, or stitching yarns, enabling thermal stability and resistance to water permeability. Laminates can withstand temperatures up to 200°C with no permanent damage. Compatible with unsaturated polyester, vinyl-ester, and epoxy resins, mechanically bonded continuous filament mat is manufactured with acid corrosion resistant, boron-free Advantex® E-CR glass.

Zoneworks    Milwaukee, WI 53223
Jul 05, 2010 Designed and built to match specific application requirements, 3D structures let users control temperature, heat, humidity, sound, odor, dust, fumes, and other elements to protect employees, products, and process integrity anywhere within industrial plant or warehouse. Reconfigurable solutions, shaped to fit entire open area or individual machine, are constructed of modular vinyl panels securely connected with Velcro® and can also be assembled for temporary product storage.

CertainTeed Corp.    Valley Forge, PA 19482-0860
Jun 22, 2010 Helping to create healthy indoor environment, AirRenew(TM) wallboard permanently reduces VOCs circulating indoors. Design actively helps clean air by capturing VOCs and converting them into inert compounds that safely remain within board, while integrated M2Tech® technology provides moisture and mold protection that meets ASTM G 21 and D 3273 standards. Also designed for fire resistance, product is suited for use in hospitals, schools, and office buildings.

Outwater    Bogota, NJ 07603
May 03, 2010 Suited for transforming ordinary houses, stores, and restaurants into country style homes, shops, and inns, hollowed Faux Wood Beams are made of high-density polyurethane and come in Ancient Rustic, Modern, Contemporary, and Vintage models with corresponding Corbels. Beams can be installed on virtually any type of surface by affixing them via countersunk nails or screws to nailing blocks or wood planks. Impervious to moisture and insects, beams are suitable for indoor or outdoor use.

VAST Enterprises, LLC    Minneapolis, MN 55418
Mar 01, 2010 VAST Composite Landscape Pavers, manufactured of up to 95% recycled car tires and plastic containers, are suited for large commercial hardscapes such as parking areas, walkways, building entrances, and plazas. Weighing less than 9 lb/sq ft, they provide high slip resistance and strength. Products include installation grid, with same composite material, that are laid out on compacted sand base on which pavers are automatically spaced and aligned.

GrayGlass    Queens Village, NY 11429
Feb 16, 2010 Offered in variety of patterns, textures, and translucency, Myst(TM) no-fingerprint glass provides privacy with high level of light transmittance. Glass is available in 5/32 in. thickness in clear and bronze colors sized up to 84 x 63 in. Acid etched side is translucent with smooth satin finish, while painted side has opaque finish on back of clear glass. Available with flat polished and beveled edges, glass is suited for elevator interiors, partitions, doors, and furniture.