Berry Plastics Corp., Tapes & Coatings Division
Franklin, MA 02038
Nov 05, 2009 Free of halogen and polybrominated biphenyls, single-coated SealDry(TM) FR Tape features flame-retardant, hydrophobic acrylic adhesive that is aggressive yet repositionable and leaves no residue. Flame-retardant, self-extinguishing properties are in both backing and adhesive. Available in 6.1 mils thickness, tape provides abrasion resistance and corrosion protection while sealing against moisture and debris ingression for aerospace, transportation, and automotive applications.

Avery Dennison, Printer Systems
Philadelphia, PA 19111
Nov 04, 2009 Comprised of 16-47 mil tapes on 3.9 mil polyethylene liners, XHA 6600 Series satisfies fastening and bonding requirements in appliance, transportation, electronics, and signage industries. They bond to high-surface energy materials such as metal, plastic, polyester, polycarbonate, acrylic, and ABS, while conformable foam provides cushioning and impact resistance. In addition to chemical, UV, and humidity resistance, tapes offer 80-130 lbf/in.² dynamic shear ratings.

3M Adhesives & Tapes Div.
St. Paul, MN 55144 1000
Nov 04, 2009 Products include Scotch Tough Duct Tape - No Residue, which leaves no adhesive behind for up to 6 months and has application range of up to 200°F. Also included is Scotch Tough Duct Tape - Extreme Hold, with double-thick adhesive layer; transparent tape; and all-weather tape that resists drying/cracking/peeling caused sunlight, heat, cold, and moisture. Outdoor painter's tape sticks to brick and stucco and removes cleanly for up to 14 days. Each tears off roll and unwinds easily.

Hexis S.A.,
Frontigna 34110 Frontigna  France
Oct 28, 2009 Part of HX30000 Series, Carbon Cast multi-layered 135 µm cast vinyl film features carbon fiber embossed pattern. Product carries solvent-based adhesive and structured PE liner with Hex'Press technology that allows air egress during application. Available in 54 in. wide rolls, conformable film is suited for full vehicle wraps, furniture, laptops, cell phones, and long-term outdoor applications.

Master Bond, Inc.
Hackensack, NJ 07601
Oct 05, 2009 Thermal adhesive film FL901AO provides heat-transfer path between heat-generating components and heat sinks or other cooling devices. Curing in 1 hr at 250°F or 30-40 min at 300°F, B-stage adhesive-preform features thermal conductivity on level of 10 BTU-in/ft²hr°F and volume resistivity exceeding 10 x 10¹² W-cm. Properties are maintained over temperature range of -100 to +400°F. It is also resistant to thermal shock, vibration, and impact.

Master Bond, Inc.
Hackensack, NJ 07601
Oct 02, 2009 Formulated to function as preferential heat-transfer path between heat-generating components and heat sinks or other cooling devices, FL901AO epoxy film can cure in 1 hr at 250°F or 30-40 min at 300°F. B-stage, 100% solid adhesive-preform offers thermal conductivity of 10 BTUoin./ft²hr°F and volume resistivity exceeding 10 x 10¹² W-cm, providing no-mess solution to electronic assembly and other industrial bonding and sealing operations.

Pres-On Products, Inc.
Addison, IL 60101
Sep 30, 2009 Contractor-grade Curb Tape seals roof curbs to HVAC units, preventing rain, moisture, and dust from damaging sensitive electronics. Flexible tape conforms to irregular roof surfaces and features single-side of rubber-based pressure-sensitive adhesive. It is manufactured from blend of closed cell neoprene, EPDM, and SBR in choice of soft, medium, or hard densities. Available in various thicknesses and widths, product passes FM VSS No. 302 for flammability.

Papco Industries, Inc.
Northvale, NJ 07647
Sep 25, 2009 Splicing irons, used for making emergency in-field repairs of non-metallic expansion joints, are available individually or as part of professional splicing kit. Latter includes splicing iron (P38), stapler, staples, spray adhesive, PFA splice film, spare fuses, splice rubbing block, scissors, and instruction manual. For protection and portability, all items are stored in watertight, dust-tight, foam-lined Pelican case.

Berry Plastics Corp., Tapes & Coatings Division
Franklin, MA 02038
Sep 24, 2009 UV-ProTEK(TM) employs continually regenerated ultraviolet inhibitor system that continually blocks 100% of UV rays from surface onto which tape is applied, eliminating ongoing maintenance concerns. Resistant to abrasion, product will not lift, stain, or dry-out and will help preserve finish of high-wear surfaces prone to scratching, chipping, and weathering. It has been tested on wood surfaces against deterioration for 3+ years and comes in various widths/lengths.

Adhesives Research, Inc.
Glen Rock, PA 17327
Sep 16, 2009 Featuring AS-192 acid-free adhesive, 1 mil ARclear® 92400 and 2 mil ARclear® 92469 provide optical bonds across entire glass viewing surface of capacitive touch screen to indium tin oxide-coated substrates. Adhesive demonstrates low extractable anions and low outgassing of VOCs, and does not contribute to corrosion of ITO layers. Both electronically clean transfer tapes include optically clear polyester release liner to facilitate handling and application.

Henkel Corp.
Madison Heights, MI 48071
Jul 30, 2009 Formulated for electrical, thermal, and mechanical assembly applications, Emerson & Cuming® CF3366(TM) delivers optimized adhesion at both room and elevated temperatures, offers electrical conductivity, and provides for uniform and void-free bondlines. Product also offers low-temperature, quick cure capabilities and ensures reliable RF ground plane performance, even in extreme environmental conditions.

Champion Tape
Sturtevant, WI 53177
Jul 30, 2009 Providing optimal adhesion and tensile strength, S4550 tape is abrasion, tear, and puncture resistant. Featuring high dielectric strength even when used over sharp edges, multi-use tape is corrosion-resistant and provides terminal board and lead anchorage. Suited for insulating/holding functions in all types of small dry type transformer, choke, reactor, and solenoid coils, tape is used for holding winding starts and finishes, coil banding, and outer protective wraps.

Andrew Roberts, Inc.
Natick, MA 01760
Jun 30, 2009 FDA-compliant ANROB 254-MDT features PTFE-glass fabric with aluminum foil backing and silicone adhesive to provide non-stick surface to heat seal against, or a slippery cover for chutes that transport foods or drugs. Available in ¼-39 in. W x 36 yd rolls, tape is 9 mils thick and operates at 500°F continuous. Providing protection against worn tape falling into polybag or package and going undetected, this foil-backed PTFE tape can be identified by metal detector.

Tape-Rite Co., Inc.
New Hyde Park, NY 11040
Jun 16, 2009 Offered in foil, film, laminates, and high-temperature versions, conductive tapes can be applied to EMI/RFI shielding and printed circuit board applications. PCB tapes are available in kapton, silicone, and acrylic adhesives for finger planting and wave solder uses. Designed for low- and high-temperature work, electric and electrical insulation tapes are available in range of gauges with various adhesive types and are die cut for accelerated application.

Fujitsu Components America, Inc.
Sunnyvale, CA 94089
Jun 09, 2009 Featuring 3H surface hardness that is scratch and chemical resistant, repositionable Protector Sheet reduces surface damage to touch screens and flat panel displays in use, testing or during shipping. It is suited for high-use, rugged and harsh applications, such as POS terminals, self-service kiosks, manufacturing and warehouse equipment, and mobile field sales and service devices. RoHS compliant sheet is available in Anti-Glare (matte) and Clear Hardcoat versions.

MH&W International Corporation
Mahwah, NJ 07430
Jun 01, 2009 Featuring thermal impedance of just 208°C-mm2/W, double-sided adhesive tape Keratherm® KL 90 consists of ceramic-filled acrylic adhesive film that provides bonding properties, and replaces use of mechanical fasteners. Silicone-free tape is 0.300 mm thick and is supplied on 400 mm wide rolls, while custom die-cut shapes are also available. Fiberglass-reinforced version KL 91 is available for applications requiring high peel strength, and conformability to irregular surfaces.

Tape-Rite Co., Inc.
New Hyde Park, NY 11040
May 27, 2009 Industrial Gasketing foam tape, available in urethane, neoprene, felt, cork, Gore-tex, self-adhesive, and non-adhesive materials, are used to create seal between 2 surfaces. Product has adhesive on one side and is soft enough to conform to other surface when pressed down. Some products may also be used as anti-skid and anti-scratch pads, and all versions can be cut to shape. Printing and tape splitting capabilities to widths from 1/64-6 in. are available.

Tesa Tape, Inc.
Charlotte, NC 28209
May 14, 2009 Multi-purpose splicing agent tesa® 64437 is suited for common repulpable adhesive tape applications, including attaching substrates to cores to enable winding process, manual splicing of one substrate to another, and for permanent splicing. Tape adheres to coated and uncoated paper stock and maintains its initial positioning with little to no movement. Utilizing tissue-paper backing and water-soluble adhesive, tape is recyclable during pulp and re-pulp processes.

Tape-Rite Co., Inc.
New Hyde Park, NY 11040
May 08, 2009 Available in Teflon®, Mylar, Kapton®, polyethylene, and foil materials, Printed Tapes come in anti-skid versions with grid and textured surfaces, and reflective styles in standard and retro dot approved patterns. Tapes are also available for security and tamper-evident applications. Some security tapes are self-destructive upon removal, while others change color or are printed with logo that cannot be reproduced. All can be custom converted to user requirements.

Aremco Products, Inc.
Valley Cottage, NY 10989
Apr 20, 2009 Fabricated using bilayer of aluminum and fiberglass tape combined with silicone adhesive, Pyro-Tape 682-HR heat reflective tape is suited for insulating pipes, ductwork, and process instrumentation exposed to high heat. Rated from -100 to 500°F, it provides adhesive strength of 40 oz/in. and tensile strength of 150 psi. Available in standard sizes of ½ and 1 in. wide x 36 Yd, as well as in custom widths, tape has cross-sectional thickness of 0.007 in.