Trion, Inc.    Sanford, NC 27331
May 17, 2013 Designed to treat grease, smoke, and odor emissions from exhaust ducts on commercial cooking applications, Grease Viper™ can be configured with multiple stages of filtration for both particulate and odor control. System is typically furnished as complete pollution control unit with automatic water-wash components for electrostatic precipitator filters, as well as odor control section, exhaust fan, system rails, pre-piped fire suppression nozzles, and necessary controls.

W. L. Gore & Associates, Inc.    Elkton,, MD 21921
Apr 29, 2013 Constructed of proprietary, non-woven composite material, GAW113 adheres to acoustic openings of portable electronic devices, such as scanners, 2-way radios, and tablet/laptop PCs, to protect against dust and splashes. Product provides water spray efficiency of 90% and ability to capture particulates as small as 5 microns. Dark gray in color, vent is 0.47 mm thick and offers spray resistance to IP54 and <2 dB acoustic transmission loss.

Imperial Systems, Inc.    Jackson Center, PA 16133
Apr 26, 2013 Designed to provide ultra-clean air over extended service life, DeltaMAXX comes in various sizes and is primarily used within Imperial CMAXX Compact Dust Collector. NanoFiber Filtration Technology, incorporating very fine surface layer of synthetic fibers to prevent particulates from embedding into the media, provides ASHRAE MERV efficiency rating of 15. Filter also fits other dust collector makes, including FARR, Torit, and AAF.

Imperial Systems, Inc.    Jackson Center, PA 16133
Apr 26, 2013 Designed with no external bolts, CMAXX™ Compact Modular Cartridge Collector eliminates leakage and corrosion. Design also removes flat spot, stifling dust and weather-related buildup, while incorporating slanted inlet for equal air distribution across enclosed filters. Side access door comes standard to ensure that inlet baffles remain clean and unobstructed by debris. Constructed with DOT/UV Grade silver pulse-valve tubing, CMAXX offers expandable solution for almost every machining operation.

Tornado Industries    Chicago, IL 60706
Apr 10, 2013 Used to dry carpets, upholstery, and other surfaces, Windshear™ Storm is offered as stand-alone system for drying carpets in small to medium-sized rooms or another version that allows stacking of multiple units for increased power and performance. This 120 V, 22 x 16.5 x 11.5 in. unit runs on 2.4 A max, weighs 17.75 lb, and has rated air velocity of 3,400 fpm. Suited for disaster and restoration cleanup operations, dryer provides 0°/30°/90° airflow direction and has 24 ft power cord.

Future Design Inc.    Mississauga, ON L4W1G6
Apr 02, 2013 Saturn Evacuation System (SES) helps blown film extrusion plants reduce airborne contaminants by up to 80% and extends cleanings from every 6 weeks to quarterly or longer. Connected to vacuum side of blower, SES comprises air ring that fits any air ring or die constructed of aluminum. System creates positive vacuum that draws contamination from low-pressure zone at die exit. Polluted air is then filtered, and discharged particulates are directed to suitable location.

Astech, Inc.    Vassar, MI 48768
Mar 13, 2013 Suited for dust streams containing moist fumes, heat, chemicals, and abrasive particulate, Astech spunbond polyester cartridges are engineered for durability in tough manufacturing environments. These washable and reusable filters, temperature rated up to 200°F, are 100% non-woven polyester and offer efficiencies up to 99.9%. Intended for manufacturing filtration applications, products are resistant to abrasion and chemicals.

KEMPER GmbH    Vreden   Germany
Mar 05, 2013 As plate filter with special coating that cleanses air of ultra-fine dust particles, PlasmaFIL eliminates need for regular overhauls. Due to flow of untreated air in top of filter system with down-flow principle, filter is designed like plate and not cylinder. Individual pleats in filter do not move on top of each other, preventing them from sticking together and optimizing media utilization. Also included, integrated spark pre-separator prevents filter fires and reduces strain on filter.

Royal Products, Div. Curran Mfg. Corp.    Hauppauge, NY 11788
Feb 22, 2013 Measuring 18 x 20 in., Filtermist Ultra™ is top-mounted on mobile cart with locking casters and is designed to fit behind chip conveyor on most machines to remove oil mist and smoke. Internal cyclone optimizes particle separation, so clean air can be exhausted back to factory floor. Because system self-drains to machine tool coolant sump, it can operate continuously. Filtermist Ultra is suitable for machines with internal volume greater than 60 ft³ and exceeds OSHA/NIOSH safety regulations.

Camfil Farr Air Pollution Control    Jonesboro, AR 72401
Jan 24, 2013 In addition to MERV 15 rating, HemiPleat® eXtreme Nano Fiber Filter is also available with MERV 16 media that delivers efficiency of 99.999% on 0.5 micron and larger particles by weight. Tri-layer technology is used to apply 2 layers of fine-pored nano fibers that act as pre-filter to base media, capturing most of dust at surface before it imbeds in filter. Open-pleat design optimizes utilization of media pack, while double gasket around perimeter prevents dust from accumulating on top of pan. 

LG Electronics USA, Inc.    Englewood Cliffs, NJ 07632
Jan 24, 2013 With near-HEPA filter performance, Dynamic V8® VL Series offers indoor air quality solution for Variable Refrigerant Flow systems without emitting ion or ozone pollutants. MERV 15+ rated unit reduces wide range of particulate and gas-phase contaminants, including ultra-fine particulate, VOCs, odors, and biological contaminants. Equipped with maintenance-free solid-state electronics, system only requires filter changes every 4 years and enables filter access without removing ceiling tiles.

Warren Rupp, Inc., A Unit Of IDEX Corporation    Mansfield, OH 44901 1568
Jan 21, 2013 Air Filter/Regulators and Lubricators feature liquid-filled pressure gauge as well as accessories such as lockout valves and mounting bracket kits. Developed for Air Operated Double Diaphragm (AODD) pumps, point-of-use Air Filter/Regulators help reduce maintenance and lower operating expenditure. Products will help prevent dirty, wet, and contaminated compressed air from decreasing performance of AODD pump.

Airflow Systems, Inc.    Dallas, TX 75243 8314
Dec 19, 2012 Equipped with dynamically balanced, non-sparking, all-aluminum motor, PCH Series provides source-point collection of airborne contaminants such as dust, fumes, weld smoke, odors, and oil mists. E-Z Arm® external arm support eliminates air flow resistance common with internally supported arms. PCH-1 model, available with 0.5, 1.0, or 1.5 hp motor, is capable of air flow rates up to 800 cfm, while PCH-2 model comes with 1.0, 1.5, or 3.0 hp motor and supports up to 1,200 cfm.

Camfil Farr Air Pollution Control    Jonesboro, AR 72401
Dec 12, 2012 Featuring modular construction, Gold Series® has reinforced door with double-thick hinges, and single flat inside panel to create smooth, air-tight gasketed seal. Fans are equipped with damper actuator handle that allows user to see from ground level whether damper is open or closed. Inside collector, gaskets have been moved to edges of pan so that no dust builds up on vertically mounted filters. Additional features include touchscreen controls, spark diverter inlet, and diaphragm silencer.

Labconco Corp.    Kansas City, MO 64132 2696
Aug 17, 2012 Using microburst or traditional cyanoacrylate fuming methods, CApture Portable Fuming System protects user from hazardous fumes. System includes heater with microprocessor-control from 120-350°F in 1° increments to heat Super Glue®; shatter-resistant protective chamber to contain fumes as they react with latent prints; exhaust blower; and particulate/carbon exhaust filter. Equipped with Up, Down, and Set buttons for programming, LCD indicates set point or actual heater temperature.

Camfil Farr Air Pollution Control    Jonesboro, AR 72401
Jun 04, 2012 Integrated on top of Gold Series® cartridge dust collectors, ASHRAE-grade Safety Monitoring Filters prevent collected dust from re-entering workspace in event of leak in dust collector's primary filtering system. Each after-filter module incorporates 2 Riga-Flo® filters rated at 95% ASHRAE efficiency and capable of handling 2,650 cfm of air/filter. By preventing flames from recirculating into workspace, units also qualify as flame arresters as outlined in NFPA Performance-based provisions.

Imperial Systems, Inc.    Jackson Center, PA 16133
May 15, 2012 Capable of full integration into CMAXX dust and fume cartridge collector systems, and located prior to collector, GreCon technology will detect spark or fire at any given location in processing system after shredding or grinding machinery. When spark is detected by sensors, system uses atomized water nozzles to quench fire hazards. GreCon operates during material processing, and in most cases, delivers effective detection and extinguishment without system shut-down, clean-out, and re-start.

Royal Products, Div. Curran Mfg. Corp.    Hauppauge, NY 11788
Mar 09, 2012 Designed to collect machinery-generated mist and smoke, Filtermist FX-Series comes in 4 sizes from 275-1200 cfm. Flexible design enables various mounting possibilities, including directly to top of machine tool, on stand, or suspended from factory ceiling. In addition to heavy-duty, 3-phase motor, features include vibration control and curved drum vanes. Air flow is automatically regulated, as machine doors close to keep correct negative pressure inside enclosure.

Lincoln Associates    Marietta, GA 30064
Feb 22, 2012 Intended for odor control applications, Purafil BIOLOGICAL AIR TREATER (BAT) features fixed-film trickling filter technology and is designed to occupy minimal footprint. Stable biofilms, resistant to fluctuations, lend to operability, while mixed-media support prevents plugging and channeling. In addition to natural bio-trickling microbial process, features include engineered chemisorptive polishing media, optimized contaminant and odor removal capabilities, and minimized pressure drop.

Pad Print Machinery of Vermont    East Dorset, VT 05253
Jan 16, 2012 Along with 300 cfm airflow and ability to connect to 2, 2.5, and 4 in. dia hoses, Clean Air 300 uses combination HEPA and carbon tray for maximum removal of fumes and gases with high particulate content. This piece of auxiliary equipment comes standard with filter monitor gauge and swivel casters. Latter, along with low-noise, compact design, enable placement anywhere within production environment.