DeWalt Industrial Tool Co.
Hampstead, MD 21074
Feb 20, 2008 Models D55171/D55371 are equipped with sealed-lube SL2 pump that allows sufficient lubrication without use of oil, while D55394 features cast iron W-pump with 3-piece oil control rings. Each unit is made portable by 12 in. semi-pneumatic, puncture-resistant tires and equipped with roll cage to protect main components. Working at 74 dBA, 1.6 hp D55171/D55371 operate at 175 max psi and 4.6 scfm @ 100 psi, while 4 hp D55394 provides 150 max psi and 10.5 scfm @ 100 psi.

VMAC Div., Mangonel Corp.
Nanaimo, BC V9X1R3
Jan 23, 2008 Delivering up to 40 cfm and 150 psi at dry weight of 150 lb, Model PREDATAIR40 above-deck hydraulic air compressor comes in 17 x 18 x 24 in. package. Rotary-screw compressor incorporates cold and soft start features, unload circuit, standby mode, service reminders, and system status display. Unit can operate at 100% duty cycle, and includes cooling system and remote LCD digital control box, system diagnostics, compressor/hydraulic temperature readings, and total system hours.

Kaeser Compressors, Inc.
Fredericksburg, VA 22404
Oct 31, 2007 DSD direct drive series rotary screw compressors feature Sigma Profile airend, Sigma Control system, and one-to-one direct drive technology. Airend is connected directly to motor via maintenance-free coupling for maximum efficiency. Remote grease fittings for drive and fan motor are included as well as high-efficiency separator system for extremely low oil carryover. Units are available in flows from 424-1,024 cfm and pressures to 217 psig.

Atlas Copco Compressors, Inc.
Westfield, MA 01085
Oct 30, 2007 KT Series of 5-20 hp, 2-stage reciprocating piston compressors are suited for intermittent use in workshops and in light industrial applications. They are available in variety of configurations including horizontal or vertical tank mounted, duplex horizontal tank mounted, and gas driven tank mounted. For OEM applications, block unit is available by itself and can be combined with choice of driver.

Gardner Denver
Quincy, IL 62301
Oct 16, 2007 Configured as air- or water-cooled, VS 135 and 170 rotary screw compressors combine Enduro + airend and AirSmart control system. Smart Mixing Valve Technology keeps air/oil mixture above pressure dew point and prevent water from condensing in compressor. While VS 135 provides 125-862 acfm, VS 170 provides 139-1,056 acfm. Both operate from 70-175 psig, exhibit respective noise levels of 76 and 77 dBA, and provides unlimited start and stop capability.

Visteon
Dearborn, MI 48126
Sep 13, 2007 Application-ready R744 climate system helps reduce overall fuel consumption of vehicles by ~0.3 L/100 km, leading to reduction of CO2 tailpipe emissions of up to 7g/km while operating the air-conditioning system. Designed to improve fuel economy in future vehicles, solution can be integrated in parallel to phaseout of existing R134a systems. Fitting technology, VisCO2nnect, assures required level of pressure while facilitating assembly and service.

Kaeser Compressors, Inc.
Fredericksburg, VA 22404
Mar 20, 2007 Sigma Frequency Control compressor model SFC 18S combines proprietary Sigma Profile airend, Sigma Control Basic system, and variable speed drive technology to offer 21-114 scfm in pressures to 217 psig. Drive technology offers precise pressure control to ±2 psig and operates from 100% down to ~28% load. While wide-opening access doors permit frontal access to all major components, overall size and use of split-cooling air flow design facilitate ducting.

Kobelco Compressors (America), Inc.
Elkhart, IN 46516
Jan 25, 2007 Available in 15-50 hp ratings, KA Series of rotary screw oil flooded compressors feature electronic control system to monitor compressor functions. Control system monitors service timers, and also enables lead-lag operation or sequencing of multiple compressors without master controller. Direct drive 108 mm compressors have air/oil separator tank and multistage separator element to reduce oil consumption to less than 2 ppm by weight.

Kaeser Compressors, Inc.
Fredericksburg, VA 22404
Dec 05, 2006 Featuring one-to-one direct drive technology, FSD Series is available in flows from 1,250-2,003 cfm and pressures to 217 psig. Units include Sigma Control system and oversized airend connected directly to motor via maintenance-free coupling. Available in air-cooled or water-cooled models, compressors include radial fan that minimizes noise levels. All are fitted with separator system for low oil carry over.

Kaeser Compressors, Inc.
Fredericksburg, VA 22404
Nov 16, 2006 Combining Sigma Profile airend, Sigma Control Basic system, and variable speed drive technology, Model SFC 11 offers 17-75 scfm in pressures to 217 psig. Unit features space-saving cabinet and split-cooling air flow design for low noise levels. Wide-opening doors allow frontal access to all major components. Drive technology offers precise pressure control to ±2 psig with operation from 100% down to 20% load.

Gardner Denver
Quincy, IL 62301
Nov 09, 2006 Featuring enclosed designs in both motor and compressor sections, TASKAIR(TM) E Series articulating piston units operate at 1,800 rpm, providing up to 150 psi of pressure and max flow of 3.35 cfm. Compressor section features oil-less design utilizing dual cast iron cylinders, stainless steel valves, and PTFE piston rings and skirts. Permanent magnet, TEFC motor is available in 12 and 24 Vdc versions. Applications include air suspension systems, air brakes, and tire inflation systems.

Dresser-Rand Co.
Houston, TX 77224
Oct 25, 2006 Integrated Compression System uses DATUM® centrifugal compressor technology driven by high-speed, close-coupled motor, with integrated rotary gas-liquid separation unit, packaged with process gas coolers in single module. Since all components are contained in same process module, system can be installed as single unit, eliminating need for large, stand-alone separators and making system suited for developing sub-sea applications.

Kaeser Compressors, Inc.
Fredericksburg, VA 22404
Jun 07, 2006 Sigma Frequency Control (SFC) compressors, available from 15-335 hp, provide flows from 17-1,568 cfm in pressures from 80-217 psig. These variable speed drive, rotary screw compressors utilize drive control technology that offers pressure control to ±2 psig with operation from 100% down to 20% load. Packages include Sigma Profile airend, super soundproofed enclosure, EPAct compliant TEFC motors, and Sigma Control or Sigma Control Basic system.

Kaeser Compressors, Inc.
Fredericksburg, VA 22404
May 19, 2006 Mounted on heavy-gauge base plates with anti-vibration pads, compressors have automatic v-belt tensioning device and deliver flows to 685 cfm fad. Standard N Series High Pressure compressors come with TEFC motor and starter as well as aluminum cylinder heads and finned cooper cooling pipes. Booster Extra Pressure (EP) compressors include 2- or 3-cylinder pumps with 100% duty cycle and forced lubrication system with continuous, full filtration.

ABS Pumps
Meriden, CT 06450 7156
Jun 22, 2005 Featuring frequency converter and magnetic bearings, HST Integralâ„¢ High-Speed Turbocompressor automatically senses and compensates for surge conditions and maintains steady aeration flow in wastewater operations. It has non-contacting rotating parts, so there is no need for oil lubrication or fluid cooling systems. Automated PLC monitor handles multiple compressors, variable process changes, speeds, and power off and on functions without operator input.

Sullivan-Palatek, Inc.
Claremont, NH 03743
Feb 11, 2005 Available on 15–50 hp inline compressors and 50–300 hp updraft models, Variable Frequency Drive control eliminates high in-rush current and continuously conserves energy. It provides consistent capacity regulation from 25–100% quick speed response. Drive maintains consistent pressure supply and matches CFM demand to plant air system requirements.

Kaeser Compressors, Inc.
Fredericksburg, VA 22404
Sep 16, 2004 Providing pressures from 80–217 psig, Sigma Frequency Control (SFC) compressor is available from 25–335 hp with flows from 22–1,568 cfm. Variable-speed drive compressor employs direct-coupled airend/motor combination and allows for operation from 100% down to 20% load. Compressor package includes soundproofed enclosure, EPA-compliant TEFC motor, and proprietary Sigma Control system. Select models are available with integrated dryer.

Kaeser Compressors, Inc.
Fredericksburg, VA 22404
Sep 16, 2004 Available in 20, 25, and 30 hp models, Series AS features Sigma Profile™ airend and delivers flows of 59–124 cfm and pressures of 80–217 psig. Split cooling airflow design reduces noise levels, while space-saving cabinet provides access to service points. Features include automatic belt tension and quick fluid change devices. Integral dryer and condensate drain are available for 20 and 25 hp models.

Kaeser Compressors, Inc.
Fredericksburg, VA 22404
Apr 21, 2004 Suited for PET bottling lines and leak testing, Booster Compressors extend from 3–50 hp with flows from 10–600 scfm. They are equipped with TEFC motor, motor starter, control monitoring system, aftercooler, prefilter, anti-vibration pads, and discharge hose. Units boost existing plant pressure, eliminating need for separate high-pressure systems and complex installation requirements.

Kaeser Compressors, Inc.
Fredericksburg, VA 22404
Dec 11, 2003 Available with ratings from 25–300 hp, Sigma Frequency Control (SFC) compressors provide pressures from 80–217 psig. Variable speed drive compressors achieve maximum efficiency over 34–1,568 cfm flow range and employ direct coupled airend/motor combination. Design allows operation from 100% down to 20% load, and packages include soundproof enclosure, EPAct compliant TEFC motors, and integrated dryer.