DeWalt Industrial Tool Co.
Hampstead, MD 21074
Oct 11, 2006 Suited for finish carpenters and woodworkers, Model D55140 produces .75 scfm at 90 psi, 135 psi max and operates at 69 dBA. It is equipped with 1 gal tank, 2.6 A motor, and oil-free pump. Weighing 24 lb and measuring 9 in. wide, portable compressor includes one-hand universal quick connect and ball drain valve for thorough tank draining. Roll cage design shields unit from wear and tear, while wrap-around control panel covers frame and provides further protection to key components.

Air Squared, Inc.
Broomfield, CO 80020
Jul 17, 2006 With completely sealed pumping section, semi-hermetic scroll Vacuum Pump/Compressor allows cooling of both scrolls. As compressor, unit develops up to 60 psig with 2 cfm displacement, while vacuum model develops up to 200 mtorr with displacement of 2 cfm. Seals are PTFE composite, and wetted surfaces are constructed of stainless steel, nickel, and hard anodized aluminum. Unit is suited for fuel cells, natural gas boosters, and pumping corrosive, radioactive, or hazardous gases.

Hitachi Power Tools
Norcross, GA 30093
Mar 29, 2006 Oil-free EC79 features contractor-grade induction motor, integrated control panel, and ball valve tank drain. Based on Inspire Design, maintenance-free, portable unit has 90 psi pressure rating that enables it to accomplish short burst applications with tools such as finish nailers and staplers. This 2 peak hp/1 Run hp compressor operates on standard household current, drawing 13 A, and features 6 gal tank and factory-installed ¼ in. coupler.

Sullair Corporation
Michigan City, IN 46360
Mar 23, 2006 Able to fit through standard 36 in. door, Series 3700 operates at 68 dba with fluid carryover less than 1 ppm. All standard maintenance can be performed from one side of machine, and compressor's fluid level can be checked without opening doors. Fully sealed environmental protection pan captures spills that may occur during servicing. Offering remote monitoring from Windows PC, WS microprocessor provides built-in full load solenoid valve for sequencing up to 16 machines.

Kaeser Compressors, Inc.
Fredericksburg, VA 22404
Feb 22, 2006 Suited for small to medium installations, Sigma Air Manager Basic balances service hours, tracks preventive maintenance requirements, and prevents simultaneous motor starts. It can manage up to 4 compressors or vacuum pumps, and can be adapted to almost any system. Unit also connects to dryers, filters, and drains to monitor operating or maintenance status.

Dynamic Power Source, LLC
New Albany, IN 47150
Nov 15, 2005 Featuring 20 x 36 x 48 in. design, PowerBox(TM) 280MP utilizes 18 hp gasoline Kohler engine to power its 20 cfm Quincy compressor and 200 A/5,500 W generator/welder combination. Self-contained, hydraulically driven PowerBox 280HD, with similar characteristics as 280MP, suits vehicle applications that already utilize power take off system. Both models mount onto side pack of service body, into load space of pick-up or service body vehicle, or onto welder platform.

FS-Elliott Co., LLC
Jeannette, PA 15644-1482
Sep 27, 2005 Along with 5-axis milled steel impellers and precision component balancing, Polaris(TM) Air Compressor Series features Corona Brand(TM) lubricants and Regulus(TM) Control System with color touch screen HMI. Aerodynamic unit has mechanical design and includes horizontally-split gearbox, pinion bearings, and bull-gear bearings to facilitate access and maintenance. Self-adjusting journal bearings and double-acting thrust bearings adapt to accommodate varying load conditions.

Mi-T-M Corporation
Peosta, IA 52068
Jul 29, 2005 Available with 5.0 hp electric motor or 8.0-9.0 hp gasoline engine, 2-Stage Air Compressors feature aluminum head, splash-lubricated aluminum crankcase and cast iron cylinder, 16.5 in. fly wheel, large canister intake filter, 14-gauge 2-piece belt guard, and 7-gauge base plate. Gasoline models include pneumatic idle control for added safety, while electric models have industrial grade pressure switch and auto start/stop with continuous run optional.

Hitachi Power Tools
Norcross, GA 30093
Jul 14, 2005 Designed to withstand jobsite use, 5.5 hp EC2510E incorporates cast iron pump and oversized oil level sight glass. Base plate integrated control panel protects gauge, regulators, and plumbing while centralizing all controls to facilitate in-field use. Product cycles from 116-145 psi and also features pneumatic throttle control, over-sized flywheel and head scoop, braided stainless steel exhaust, shielded cross over tube, and ball valve tank drains.

Mi-T-M Corporation
Peosta, IA 52068
Jun 03, 2005 Along with pneumatic tires and stainless steel braided discharge hose, portable units feature cast-iron, single-stage compressor with aluminum head and splash-lubricated, cast-iron crankcase. Gasoline compressors feature 5.5-7.0 hp industrial Honda, Vanguard, or Subaru engines; pneumatic idle control; and quality pilot valve unloader. Electric compressors offer 1.5-3.0 hp, 120-230 V electric motors, auto start/stop, and industrial grade pressure switch.

Curtis-Toledo, Inc.
St. Louis, MO 63133
May 10, 2005 Offered in single-stage, 110 psig max and 2-stage, 220 psig max versions, compressors feature totally dry crankcase, PTFE extended-wear pistons and rings, and hardened alloy cylinders. Single-stage simplex and duplex tank-mounted units cover 3–10 hp, while 2-stage units are rated 5 hp. Dual-stage tank sizes are 60, 80, and 120, while single-stage compressors add 200 gal tank. All versions feature stainless steel valves and built-in after-cooler.

Mi-T-M Corporation
Peosta, IA 52068
Mar 25, 2005 Portable, single-stage Model AC1-HE02-05M1 is constructed with aluminum oil-lubricated crankcase and aluminum head with cast iron cylinder. It features 5.0 gal twin tank design, powder-coated steel frame, rubber isolators, and protective pump-motor housing. With rubber handle for cushioned grip, hand-carry compressor includes quick connect fittings, stainless steel braided discharge hose, and thermal relief motor protection.

Curtis-Toledo, Inc.
St. Louis, MO 63133
Mar 18, 2005 Series KS is supplied with low dBa acoustical enclosures and removable side panels. Ranging from 10–50 hp, units incorporate AIRTRON microprocessors, which monitor parameters and working conditions of compressor. Power consumption is minimized with online-offline and start-stop control with delay off timer. Electric motors are TEFC, and Wye-Delta starters are provided on 25–50 hp models. Manual and automatic belt tensioners are standard.

Mi-T-M Corporation
Peosta, IA 52068
Feb 22, 2005 Two-stage Air Compressors feature aluminum head and splash lubricated cast iron crankcase and cast iron cylinder. Electric model is equipped with 5.0 hp UL-listed electric motor, while gasoline model includes 8.0-9.0 hp Honda, Vanguard, or Subaru engine, pneumatic idle control, and pilot valve unloader. Both types feature 2 pneumatic tires with tubes and steel hubs, powder-coated 8 gal twin tank receivers, and stainless steel braided discharge hose.

Curtis-Toledo, Inc.
St. Louis, MO 63133
Feb 22, 2005 Featuring cast iron construction, heavy-duty CA series incorporates steel ASME air receiver, totally enclosed belt guard, and stainless steel valves. Series includes Simplex tank-mounted, electric, single- and 2-stage models rated ½â€“15 hp, 95–125 psi and 3–15 hp, 145–175 psi, respectively. Tank-mounted, gasoline-driven, 2-stage models are rated 5½â€“18 hp, 145–175 psi, while Duplex tank-mounted, electric, 2-stage models are rated 5–15 hp, 145–175 psi.

Kaeser Compressors, Inc.
Fredericksburg, VA 22404
Feb 15, 2005 Complete system comes with up to 2 Kaeser Sigma rotary screw compressors, CFC-free refrigerated air dryer that delivers consistent pressure dew point as low as 38°F, and optional filter mounted on horizontal receiver tank. Compressors, available in 3–40 hp sizes with max working pressures from 80–205 psig, come with starters, aftercooler, and sound attenuating enclosure. Filters are available that remove particles as small as .01 micron.

Sullivan-Palatek, Inc.
Claremont, NH 03743
Feb 11, 2005 Available on 15–50 hp inline compressors and 50–300 hp updraft models, Variable Frequency Drive control eliminates high in-rush current and continuously conserves energy. It provides consistent capacity regulation from 25–100% quick speed response. Drive maintains consistent pressure supply and matches CFM demand to plant air system requirements.

Mi-T-M Corporation
Peosta, IA 52068
Jan 20, 2005 Single-stage compressors have aluminum head, cast iron crankcase, 10 in. fly wheel, stainless steel braided discharge hose, and pneumatic tire. Dual gauges are provided for tank and outlet pressure, and manual drain valves facilitate maintenance. Integrated belt tightening system pulls engine straight to ensure constant belt alignment. Gasoline compressors include 5.5-7.0 hp motors, while electric units include 1.5-3.0 hp industrial UL-listed motors.

Curtis-Toledo, Inc.
St. Louis, MO 63133
Jan 13, 2005 Industrial RS Series rotary screw air compressors, built for high-duty cycle applications, are offered with or without micro-processor controller. Available as 5–300 hp units, products have design that simplifies operation and maintenance. Timed dual control with delay off timer is supplied as standard, and air-ends are manufactured to ISO-9001 standards with oversized diameter bearings.

Curtis-Toledo, Inc.
St. Louis, MO 63133
Dec 21, 2004 Available in models from 5–15 hp, Ultra-Pack™ Compressors are factory-equipped with magnetic motor starter, air-cooled after-cooler, dual control, automatic tank drain, low oil level shutdown, and tank isolator pads. To facilitate installation, compressors come as complete air systems, plumbed, pre-wired, and ready to run.